change time FIAT BARCHETTA 2001 1.G Radio Tape Player And External CD Manual

10Cyan GialloMagenta Nero603.47.453
10
OPERATION
MAIN OPERATIONS
IMPORTANTTurn the volume down before
turning the sound system off. Sound quality will be
perfect and the sound system will not be damaged
when you turn it back on.
Turning the sound system on and adjusting the vol-
ume
1.Press the (POWER) button [2] to turn the
sound system on. Press the (POWER) button for at
least one second to turn the sound system off.
2. Press the function button (FUNC)[2] to select
Radio, Tape and CD functions cyclically as follows:
Radio➞Tape ➞CD ➞Radio
The message “NO CASS”will appear if there is
no tape in the player.The message “NO DISC”will appear if there is
no CD in the magazine or if the CD player is not
connected.
3.Press the up/down buttons [3] to adjust the vol-
ume.
N: to turn volume up
O: to turn volume down
Audio adjustments
1. Press the audio mode (A-M) [1] to select the
mode required. The mode changes each time the
(A-M) button is pressed as follows:
BASS / TREB(bass / treble) ➞BAL / FAD(bal-
ance / fader) ➞previous mode.
2. Adjust bass and treble with the left/right and the
up / down buttons [18], [3].

G: Decrease bass
H: Increase bass

11Cyan GialloMagenta Nero603.47.453
11
Mute
This function will automatically turn the volume
down to zero.
Press the MUTE[14]. The sound will disappear
and the message “MUTE” will appear on the dis-
play. Press the MUTEbutton again to turn the func-
tion off.
This function is operating in “cassette” or “com-
pact disc” modes only.
RADIO FUNCTIONS
Listening to the radio
1. Press the function button (FUNC) [2] to select
radio mode.
Press the BANDbutton [17] to select the recep-
tion band FM (FM1, FM2, FM3) ot AM (MW /
LW). The band will change each time the button is
pressed as follows:
N: Increase treble
O: Decrease treble
3.Adjust balance and fader with the left/right and
up / down buttons [18], [3].

G: Increase left speaker sound
H: Increase right speaker sound

N: Increase front speaker sound
O: Increase rear speaker sound
Loudness
Keep the loudness button (LOUD)[1] pressed
for longer than 2 seconds to activate/deactivate this
function. The message“LD”will appear on the dis-
play when the function is on.