turn signal FIAT BARCHETTA 2001 1.G Radio Tape Player And External CD Manual

13Cyan GialloMagenta Nero603.47.453
13
Automatic storage
1.Press theBANDbutton [17] to select the
band.
2.Press theASbutton [10]. for 2 seconds or
more. Strong signals will be automatically stored in
pre-set memory. If less than 6 strong stations are
available, the previously stored stations will be kept
for the pre-set buttons where no new stations can
be stored.
Recalling pre-set stations
1.Press the BANDbutton [17] to select the
band.
2.Press the pre-set buttons [12] to select the re-
quired station. 3. The messageMANwill appear on the display
and manual tuning is possible.
4.Press the left /right buttons [18] to tune to the
stations
The system will return automatically to automatic
tuning after 7 seconds.
Manual station storage
24 stations (6 each in the FM1, FM2, FM3, AM
bands) can be stored as follows:
1. Press the BANDbutton [17] to select the
band.
2. Press the left/right buttons [18] to tune to the
station to be stored.
3. Press the pre-setting button [12] where to
store the station for 2 seconds or more.
Note: When storing a station, the station previ-
ously stored for that button will be deleted.

14Cyan GialloMagenta Nero603.47.453
OPERATION
14
RDS FUNCTIONS
RDS (Radio Data System)
The radio must be tuned toFMto access the RDS
functions.
The RDS system gives you automatic tuning to the
optimal frequency of the RDS-enabled stations being
listened to (AFfunction). You can therefore contin-
ue to listen to the station without having to alter the
frequency when you change the area. Obviously the
station you are listening to must be picked up in the
area you are travelling through.
If the signal is very weak and/or if the reception is
bad, the sound system will mute for a few seconds
while seeking an alternative frequency for the sta-
tion. If this occurs frequently, we recommend turn-
ing the AFfunction off.If an RDSstation can non longer be picked up in
your current position and the AFfunction is on, the
message AFon the display will flash. As soon as cor-
rect reception is restored, “AF”will stop flashing.
The RDS will also display the name of the station
you are listening to (PSfunction).
Alternative frequency search (AF function)
Press the AFbutton [7] to activate/deactivate the
function. When the function is on, the message AF
will appear (or flash) on the display.
If reception worsens, the message “AF”will start
flashing and the device will attempt to tune to an al-
ternative frequency. If the switch-over is not possi-
ble, the message “SEARCH”will appear on the
display and the sound system will tune to the current
station before starting the search.