Compact disc FIAT BRAVO 2007 2.G Radio CD MP3 Manual

QUICK
GUIDE
12
RADIO
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
FUNCTIONS AND
ADJUSTMENTS
SELECTING RADIO/CD/
CD CHANGER
Pressing briefly and repeatedly button SRC
it is possible to select the following func-
tions in sequence:
– TUNER (Radio)
– CD (Compact Disc)
– CDC (CD Changer) (only if the CD
Changer is connected).
After changing sound source, the display
will show the current function selected:
TUNER (Radio), CD (Compact Disc),
CDC (CD Changer).
Functions not available (e.g. “CD” if a
Compact Disc is not inserted) are disabled
automatically.SOUND SOURCE MEMORY
FUNCTION
If while listening to a CD another function
is selected (e.g.: the radio), playing is
stopped and when the CD mode is re-
sumed, it starts again from the point in
which it was stopped.
If while listening to the radio another func-
tion is selected, when the Radio mode is
resumed, it is tuned to the last station se-
lected.
VOLUME ADJUSTMENT
Adjust volume through button/knob
ON/OFF.
Turn the knob clockwise to increase vol-
ume, turn the knob counter-clockwise to
lower the volume.
The display will show: “VOLUME 00” …
“VOLUME 12” TURNING THE
SOUND SYSTEM ON
The sound system is switched on pressing
the button/knob ON/OFF. The turning on
of the sound system radio can be con-
nected to the car ignition: turning the ig-
nition key to MAR, the radio turns on;
turning the key to STOP the radio turns
off (see paragraph “Setting the AUTO
function” is section “Radio”).
If the sound system is turned on with the
ignition key at STOP, it will turn off auto-
matically after about 20 minutes.
TURNING THE
SOUND SYSTEM OFF
To turn the sound system off keep but-
ton/knob ON/OFF pressed.
F F
U U
N N
C C
T T
I I
O O
N N
S S
A A
N N
D D
A A
D D
J J
U U
S S
T T
M M
E E
N N
T T
S S

13
QUICK
GUIDE
RADIO
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
FUNCTIONS AND
ADJUSTMENTS
SOFT MUTE FUNCTION
When the Mute function is turned on/off
the volume will gradually increase or de-
crease (Soft Mute function).
TONE ADJUSTMENT
(bass/treble)
Proceed as follows:
– briefly and repeatedly press button AU-
DIO
DSPuntil the display shows “BASS”
or “TREBLE”.
– turn the knob ON/OFF clockwise to in-
crease bass or treble tones or turn it
counter-clockwise to decrease.
The display will show for a few seconds
the bass/treble levels (–10 to +10).
A few seconds after the last setting the dis-
play will resume the radio main screen.BALANCE ADJUSTMENT
Proceed as follows:
– briefly and repeatedly press button AU-
DIO
DSPuntil the display shows “BAL-
ANCE”
– turn the button/knob ON/OFF clock-
wise to increase the sound from the right
speakers or turn it counter-clockwise to
increase the sound from the left speakers.
The display will show for a few seconds
the balance levels, from Í+10 to È+10
(È= right, Í= left). A few seconds af-
ter the last setting the display will resume
the radio main screen. MUTE FUNCTION
(turning off the volume
completely)
To switch the Mute function on, press
briefly the button MUTE. Volume will
gradually lower (Soft Mute function) and
the display will show the current sound
source selected followed by the Mute (e.g.
“TUNER MUTE” when the Radio is se-
lected).
To switch the Mute function off, press
briefly the button MUTE again. Volume
will gradually become louder (Soft Mute
function) returning to the value set before
switching on the Mute function.
Turning the button/knob ON/OFF the
sound level changes; the Mute function will
however stay on. Press the button MUTE
again to turn it off.
When the Mute function is on, all the oth-
er functions can be used. If a traffic an-
nouncement arrives with the TA function
on, the traffic message will ignore the
Mute function.

QUICK
GUIDE
14
RADIO
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
FUNCTIONS AND
ADJUSTMENTS
FADER ADJUSTMENT
Proceed as follows:
– briefly and repeatedly press button AU-
DIO
DSPuntil the display shows “FADE”
– turn the button/knob ON/OFF clock-
wise to increase the sound from the front
speakers or counter-clockwise to increase
the sound from the rear speakers.
A few seconds after the last setting the dis-
play will resume the radio main screen.LOUDNESS FUNCTION
The Loudness function improves the
sound volume when listening at low lev-
el, increasing the basses and trebles. When
volume is at max. the Loundness function
is excluded.
To switch the function on/off, open the
MENU by pressing briefly button MENU
RDSand scroll it. Function condition (on
or off) is shown on the display by message
“LOUDNESS: ON” or “LOUDNESS:
OFF”, that can be selected by means of
buttons Èor Í.
TELEPHONE PROVISION
If the hands-free kit is installed on the car,
when a phone call is received the volume
set will be the one selected for the
PHONE function in the menu, if required
it can be muted OFF. PRESET/XX EQ SET*/ CLASSIC/
ROCK/JAZZ FUNCTION
(equalizer on/off)
To turn the equalizer on press for long
button AUDIO
DSPand turn the but-
ton/knob ON/OFF to select one of the
following settings:
– “PRESET” (predefined equalizer setting);
– “CLASSIC” (predefined equalizer setting
for best playing of classic music);
– “ROCK” (predefined equalizer setting
for best playing of rock music);
– “JAZZ” (predefined equalizer setting for
best playing of jazz music);
– “CUSTOMER” (setting of the 5 equal-
izer bands that can be changed by the
user)
Press repeatedly button Èor Íto select
the required band and then use the but-
ton/knob ON/OFF to increase/decrease
the level in the selected frequency band.

15
QUICK
GUIDE
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
The AM band is divided into sections:
MW, LW and AMAST. The AMAST band
is reserved to the stations stored auto-
matically with the AutoSTore function.
The radio is always preset for receiving
stations broadcasting with RDS (Radio Da-
ta System).
PRESETTING BUTTONS
The buttons with symbols from 1 to 6
make it possible to set the following pre-
settings:
– 24 in the FM band ( 6 in FM 1, 6 in FM
2, 6 in FM 3, 6 in FMAST)
– 6 in the LW band
– 6 in the MW band
– 6 in the AMAST band
To call a preset station, choose the re-
quired frequency band and then press
briefly the corresponding preset button
(from 1 to 6). The display will show the
station name and frequency and also the
presetting number.STORING THE LAST
STATION HEARD
The radio automatically keeps in storage
the last station heard for each reception
band, which is then tuned when the ra-
dio is turned on or the reception band is
changed.
AUTOMATIC TUNING
Briefly press button Èor Íto start au-
tomatically searching the tuning for the
next station that it is possible to receive
in the direction chosen.
If the station on which the tuner stops is
one of the stations stored with the pre-
setting buttons (from 1 to 6), the display
will show the presetting number. When the sound system is turned on, the
last function selected before turning off
is played (Radio, Compact Disc or CD
Changer).
To select the Radio source while listening
to another audio source, press briefly and
repeatedly button SRC.
When the Radio source is selected, press
briefly and repeatedly button BAND
ASto
select the required reception band.
Each time the BAND
ASbutton is pressed
the bands: “FM1”, FM2”, “FM3”, “FMAST”,
“LW”, “MW” and “AMAST” are select-
ed in sequence
The FM band is divided into sections: FM1,
FM2, FM3 and FMAST. The FMAST band
is reserved to the stations stored auto-
matically with the AutoSTore function.
The “FMAST” reception band is reserved
to the stations stored automatically with
the AutoSTore function.
R R
A A
D D
I I
O O

QUICK
GUIDE
16
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
SCAN FUNCTION
(station scanning)
Press button SCAN to start scanning the
stations in the frequency band selected
(FM, AM, MW, LW). Each station found
will be heard for a few seconds and the
relevant frequency is shown on the dis-
play.
During scanning, the display will show the
message “TUNER SCAN”, with the word
“SCAN” flashing.
When the SCAN function is on, all the
other functions are cancelled.
The SCAN function is interrupted in the
following cases:
– pressing again button SCAN
– turning the sound system off
– changing the sound source (Radio, CD
Changer)
– changing the selected frequency band (or
the storage block)
– pressing one presetting button
– turning the AutoSTore function on (au-
tomatic storage)SCANNING PRESET STATIONS
Keep button SCAN pressed for at least
2 seconds to start scanning the preset sta-
tions in the current frequency band;
– FM: FM 1, FM 2, …., FM II 1, FM II 2,…
FM III 1, FM III 2,… FMAST 1,
FMAST 2,….
– AM: MW 1, MW 2, …. MW 6, LW 1,
LW 2, …. LW 6, AMAST 1,
AMAST 2,…
Each preset station will be heard for a few
seconds and its frequency shown on the
display.
The Scan function is interrupted in the fol-
lowing cases:
– pressing again button SCAN
– turning the sound system off
– pressing one presetting button
– turning the AutoSTore function on (au-
tomatic storage)
– changing the sound source (Radio, CD
Changer)
– changing the selected frequency band or
the FM level MANUAL TUNING
This allows manual station searching in the
chosen band. To turn this function on use
the MENU (see paragraph “Manual station
tuning on/off (TUNING SEEK) in section
“Radio”).
For manual tuning proceed as follows:
– Select the band using the button BAND
AS: FM1, FM2, FM3, MW or LW.
– Press briefly and repeatedly button Èor
Í.
Keeping one of the buttons Èor Í
pressed obtains fast forward seeking,
which is stopped when the button is re-
leased.

17
QUICK
GUIDE
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
MANUAL STATION STORAGE
Use buttons from 1 to 6 to store the sta-
tion being heard in the selected band.
Keep pressed one of these buttons (1 to
6), when station storing is completed the
display will show the corresponding but-
ton number and a confirmation beep will
be given.AUTOSTORE FUNCTION
(automatic station storage)
To switch on the AutoSTore function (au-
tomatic station storage), keep button
BAND
AS. With this function the radio au-
tomatically stores the stations with the
strongest signal in decreasing order of in-
tensity in the FMAST frequency band (if
tuned on FM band) or AMAST (if tuned on
AM band).
IMPORTANT Activating the AutoSTore
function cancels the stations stored pre-
viously in the FMAST or AMAST band.
During automatic storage the display
shows “TUNER FMAST” or “TUNER
AMAST” if TUNER mode (Radio) with FM
or AM frequency band is selected. To in-
terrupt the automatic station storage,
press button BAND
ASagain: the radio will
automatically tune to the station heard be-
fore activation of the AutoSTore function.LISTENING TO STORED
STATIONS
Proceed as follows:
– select the required frequency band and
the storage block (FM1, FM2, FM3,
FMAST, MW, LW, AMAST);
– briefly press one of the six station stor-
age buttons.
The display will show the station name (if
present) and frequency, whereas at the
bottom of the display is shown “Pn”
where n is the number corresponding to
the current station.
In bands FM1, FM2 and FM3, if reception
is poor or weak and the AF alternative fre-
quency search function is active, the sta-
tion with the strongest signal that is broad-
casting the same programme will be
sought automatically.

QUICK
GUIDE
18
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
When the signal of the RDS station tuned
weakens, the following two cases may oc-
cur:
– With “AF SWITCHING: ON” the RDS
system activates automatic tuning of the
optimum frequency of the station chosen,
with the stations enabled, therefore the
radio is automatically tuned to the station
with the strongest signal that is broad-
casting the same programme. During the
journey it will thus be possible to contin-
ue listening to the station chosen with-
out having to change the frequency when
changing area. Of course, the station be-
ing listened to must be receivable in the
area the car is crossing.
– With “AF SWITCHING: OFF” the ra-
dio will not tune the strongest station au-
tomatically and it will have to be found
manually using the tuner buttons. AF FUNCTION
(alternative frequency search)
To turn the AF function on/off, press
briefly button AF
PTY. RDS name (if avail-
able) will stay on the display and if the
function is on the wording is shown.
– “AF SWITCHING: ON” = alternative
frequency search on
– “AF SWITCHING: OFF” = alternative
frequency search off.TA FUNCTION
(traffic information)
Certain stations in the FM band (in stor-
age blocks FM1, FM2, FM3 and FMAST)
are enabled to also broadcast information
about traffic conditions. During a traffic
bulletin, the message “TRAFFIC INFO”
will be displayed alternate with the cur-
rent one (e.g.: station name).
To turn the TA function on/off, press
briefly button TA. When the TA function
is on the display will show the message
“TA-ON”.
When the TA function is on, an incoming
traffic bulletin will stop temporarily the
current broadcasted programme or the
CD being played. Switching from the se-
lected station to the station broadcasting
traffic announcements is only possible if
connection for EON function is enabled.

19
QUICK
GUIDE
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
PTY FUNCTION
(selecting a type of programme)
Several radio station offer the programme
type service (PTY) within the FM band
(FM1, FM2, FM3). For example, stations
broadcasting info/news will display as PTY
code the message “NEWS”.
The PTY function activates a seek filter
that tunes only stations broadcasting pro-
grammes with the preselected PTY code
(e.g.: “POP”).
To turn on the PTY function, keep button
AF
PTYpressed.
The programme types offered by a radio
station may vary according to the pro-
gramme:
NEWS News and magazine
AFFAIRS Politics and
news
INFO Special information
programmes
SPORT Sport
programmes
EDUCATE Educational
programmes
DRAMA Radio dramas
and literature
CULTURE Culture, church
and religion
SCIENCE ScienceVARIED Variety
POP M Pop music
(hits)
ROCK M Rock music
EASY M Easy music
LIGHT M Light classic
music
CLASSICS Classic music
OTHER M Other types of music
(e.g. folklore)
WEATHER Weather report
FINANCE Finance news
CHILDRENChild’s programmes
SOCIAL Social information
RELIGIONReligion and philoso-
phy
PHONE INListener’s calls (other
than “
PHONE IN” func-
tion active only with
hands-free kit connec-
tion for mobile phone)
TRAVEL Tourist’s
informationLEISURE Free time and hobbies
JAZZ Jazz
COUNTRY Country music
NATION M National
broadcasting
OLDIES Golden Oldies
FOLK M Folk music
DOCUMENT Special reports
PTY automatic seek
To select a PTY through automatic seek,
select the required type of programme
from the list stored and then start auto-
matic seek. Procedure is described in next
paragraphs.
PTY function reactivation
Press button AF
PTYfor over 2 seconds.
The last programme type selected (e.g.
“POP”) will then be displayed.

QUICK
GUIDE
20
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
PTY setting
Press button AF
PTYfor over 2 seconds to
display the PTY code of the current sta-
tion. Select the required code by turning
the button/knob ON/OFF and then press
button Èor Íto start automatic seek-
ing of stations with the PTY code select-
ed. Automatic seek will stop automatical-
ly to the next station broadcasting the PTY
programme selected. The type of pro-
gramme will be displayed (e.g. “POP”) with
the word “PTY” flashing.
IMPORTANT If no station is broadcasting
the selected PTY, the last station will be
tuned and the PTY function is aborted.
PTY function deactivation
After entering the PTY mode, if no oper-
ation is performed within 10 seconds, the
radio returns to the mode active before
pressing the AF
PTYbutton and it will store
the last PTY code selected. MENU
MENU
RDSbutton options
To activate the Menu, press briefly the
button MENU
RDS.
In this way you open the first level Menu.
To open the second level menu keep the
MENU
RDSbutton pressed for over 2 sec-
onds.
To scroll the Menu options press repeat-
edly the MENU
RDSbutton.
First levelMenu options are the follow-
ing:
1 MANUAL TUNING SEEK on/off
2 CD Compression
3 Confirmation beep (BEEP)
4 Tuning sensitivity adjustment (SENS
DX/LO)
5 News programmes on/off (NEWS)
6 Automatic volume adjustment with car
speed (SVC)
7 Traffic announcements tuning (EON
TA)
8 Loudness on/off (LOUD- NESS)
9 CD naming (CD NAMING) (only in CD
Changer mode);
10 CD naming/track selection (TPM =
Track Program Memory)
Press buttons Èor Íto activate/deacti-
vate the function selected.Second levelMenu options are the fol-
lowing:
1 Time display of the current RDS station
(if available)
2 “Audio distortion clipper” on/off (AU-
DIO CLIP DETECT)
3 Max volume setting at switching on
(MAX VOLUME)
4 Telephone volume adjustment (PHONE)
5 AUTO setting selection which enables
to set radio turning on/off depending on
car ignition/switching off.
Use the button/knob ON/OFF to turn
on/off the function selected.
NOTE Each time you pass to next setting,
the previous one will be stored.

21
QUICK
GUIDE
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
AVAILABLE SETTINGS
First level Menu options
1 - TUNING SEEK
(manual tuning on/off)
This option enables to seek manually
(MANUAL) or automatically (AUTO) the
stations stored.
To switch between manual and automat-
ic seek use buttons Èor Í.
The display will show the current tuning
seek mode:
– “TUNING SEEK: AUTO”: automatic
seek on
– “TUNING SEEK: MANUAL”: manual
seek on.2 - CD Compression
This option enables to optimize the sound
level according to the music being played
by the CD.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “COMPRESSION: ON” = function on
– “COMPRESSION: OFF” = function off
3 - BEEP (confirmation beep)
The system provides the BEEP function ac-
tive (message “ROGER BEEP-ON” on the
display).
This function gives sound confirmation
(BEEP) when pressing buttons.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “ROGER BEEP: ON” = function on
– “ROGER BEEP: OFF” = function off.4 - SENS DX/LO
(tuning sensitivity adjustment)
With this function it is possible to change
the sensitivity of automatic station tun-
ing. When low sensitivity is set “SENSI-
TIVITY: LOCAL” only stations with ex-
cellent reception are sought; when high
sensitivity is set “SENSITIVITY: DIS-
TANT” all stations are sought. Therefore,
if the car is in an area with a considerable
number of stations and you want to
choose only those with a strong signal, set
to low sensitivity “SENSITIVITY: LOCAL”.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “SENSITIVITY: LOCAL” = low sensi-
tivity
– “SENSITIVITY: DISTANT” = high sen-
sitivity.