tow FIAT DOBLO 2008 1.G Owner's Guide

197TECHNICAL SPECIFICATIONS
Weights (kg) - Fiat Doblò Passengers Transport versions - High roof
(*) If special equipment is fitted (wing window, tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
1.4 8V
1250
5p+225
1010
1085
1850
1000
500
–
601.9
120HPMultijet
1360
5p+225
1010
1085
1960
1300
500
–
60
1.3 85HPMultijet
1350
5p+225
1010
1085
1950
1300
500
–
60
Weight empty (including fluids, 90% fuel in the tank and no optional)
Payload including driver (*):
Maximum allowed loads (**)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on roof
Maximum load on ball coupling (trailer with brakes)
174-211 Doblo GB 16-12-2008 14:26 Pagina 197

198TECHNICAL SPECIFICATIONS
Weights (kg) - Fiat Doblò Passengers Transport versions - 7-seat
(*) If special equipment is fitted (wing window, tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
1.4 8V
1320
7p+75
1010
1100
1920
1000
500
–
601.9
120HPMultijet
1430
7p+75
1010
1100
2030
1300
500
–
60
1.3 75HPMultijet
1420
7p+75
1010
1100
2020
1300
500
–
60
Weight empty (including fluids, 90% fuel in the tank and no optional)
Payload including driver (*):
Maximum allowed loads (**)
– front axle:
– rear axle:
– total:
Towable weight:
– Towable weight
– trailer without brakes
Maximum load on roof
Maximum load on ball coupling (trailer with brakes)
174-211 Doblo GB 16-12-2008 14:26 Pagina 198

199TECHNICAL SPECIFICATIONS
Weights (kg) - Fiat Doblò Combi versions N1
(*) If special equipment is fitted (wing window, tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
Weight empty
(including fluids, 90% fuel in the
tank and no optional)
Payload including driver (*):
Maximum allowed loads (**)
– front axle:
– front axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on roof
Maximum load on ball coupling
(trailer with brakes)1.4
8V
1240
680
1010
1150
1920
1000
500
100
601.3
85HPMultijet
1340
680
1010
1150
2020
1300
500
100
601.9 120HPMultijet
1330
680
1010
1150
2010
1300
500
100
601.9 120HPMultijet
1350
680
1010
1150
2030
1300
500
100
60 1.3
75HPMultijet
1320
680
1010
1150
2000
1200
500
100
60
174-211 Doblo GB 16-12-2008 14:26 Pagina 199

204TECHNICAL SPECIFICATIONS
FUEL CONSUMPTION
The fuel consumption and CO2emis-
sion values listed in the table below are
determined based on homologation
tests laid down in the European Di-
rective 2004/3/EC.
To measure fuel consumption and
emissions the procedures below are
followed:
– Urban cycle:the vehicle is start-
ed with the engine cold and driven so
as to reproduce the speed and
gearshift profile specified in the Euro-
pean Directive. The cycle includes a
series of accelerations, decelerations,
driving at constant speed and standing
with the engine in idle. The maximum
speed reached during the cycle is
50km/h and the average speed is
19km/h.– Extraurban cycle:consecutive to
the urban cycle according to the spec-
ifications laid down in the European
Directive. The maximum speed
reached during the cycle is 120km/h
and the average speed is 63km/h.
– consumption:this is determined
through a weighted average of the
consumption measured for the urban
cycle (with approx. 37% weight) and
for the extraurban cycle (with approx.
63% weight).
IMPORTANT
In practice, fuel consumption may be
higher than the values determined
through the homologation tests. Be-
low are some of the main factors that
may result in a deviation between the
consumption measured during normal
use of the vehicle and that measured
during the homologation tests.1) Vehicle conditions: inadequate
maintenance, use of roof racks, trail-
ers, heavy load conditions, intense use
of the electrical devices and the air-
conditioning.
2) Driving style: frequent cold starts
to drive short stretches, incorrect
procedure to warm up the engine,
gearshifting, continuous driving at high
speeds, sudden acceleration and brak-
ing.
3) Traffic and road conditions: driving
in traffic, uphill or twisty roads, road
surface conditions.
4) Atmospheric conditions: intem-
perate climate, wind, rain, snow, dri-
ving at high altitudes.
5) Percentage town, out-of-town and
motorway driving.
174-211 Doblo GB 16-12-2008 14:26 Pagina 204

205TECHNICAL SPECIFICATIONS205
PRACTICAL TIPS TO
REDUCE CONSUMPTION
AND ENVIRONMENTAL
POLLUTION
Vehicle conditions
1. Have checks and adjustments
carried out in accordance with the
“Scheduled Service Plan”.
2. Check the tyre pressure at inter-
vals of not more than 4 weeks (see
“Tyre pressure”). Too low tyre pres-
sure increases consumption as the
rolling resistance increases. In these
conditions the tyres wear faster and
performance deteriorates.
3. Use winter tyresonly in the sea-
sons where dictated by the climatic
conditions. Winter tyres not only in-
crease consumption but also tyre
noise.4. Do not travel in heavy load con-
ditions(vehicle overloaded): The
weight of the vehicle (especially when
driving in town) and its trim greatly af-
fect fuel consumption and stability.
5. Remove roof racks or ski racks
after use. These accessories reduce
the aerodynamics of the vehicle and
have a negative effect on fuel con-
sumption.
6. Ideally use a trailerto transport
particularly bulky objects.
7. It is preferable to use the air vents:
driving with the window open has a
negative effect on the aerodynamics of
the vehicle.
8. Use the electrical devices only for
the time strictly necessary. The rear
heated window, additional headlights,
windscreen wipers and heater fan
need a considerable amount of ener-
gy, consequently increasing fuel con-
sumption (up to 25% more in the ur-
ban cycle).9. Using the air-conditioning in-
creases consumption (up to 30% more
on average): use the air vents when
the outside temperature permits.
Driving style
1. After starting the engineit is
advisable to set off immediately and
slowly avoiding revving up the engine.
Do not warm up the engine with the
vehicle stationary either at idle or at
high speed: in these conditions the en-
gine in fact warms up more slowly, in-
creasing consumption, emissions and
wear of the mechanical devices.
2. Avoid revving upwhen starting
at traffic lights or before turning off the
engine. This action, like double-de-
clutching, is unnecessary and causes in-
creased fuel consumption and pollu-
tion.
174-211 Doblo GB 16-12-2008 14:26 Pagina 205

211TECHNICAL SPECIFICATIONS
PROVISIONS FOR THE PROCESSING OF A VEHICLE
AT THE END OF ITS LIFE-CYCLE
For years now Fiat has been developing its global commitment towards the safeguarding and protection of the
Environment through the continuous improvement of its production processes and the making of increasingly more “eco
friendly” products. With a view to guaranteeing the best possible service to clients in full observance of environmental
standards and in response to the obligations imposed by European Directive 2000/53/EC on end-of-life vehicles, Fiat offers
its clients the possibility to hand in their vehicle* at the end of its life span without additional costs.
The European Directive, in fact, provides for the take-back of the vehicle without the last holder or owner of the same
incurring expenses due to the fact that the market value of the vehicle is zero or negative. In particular, in almost all of
the countries of the European Union, up until 1st January 2007, take-back of the vehicle free of charge only applies to vehi-
cles registered from 1 July 2002 on, while, from 2007 on, take-back will be carried out free of charge, independently of
the year of registration, provided that the vehicle still contains all its essential component parts (especially engine and
body) and is free from additional waste materials.
Our contracted network of authorised treatment facilities has been carefully selected in order to provide a quality ser-
vice to our customers by de-polluting and recycling “End of Life Vehicles” to approved environmental standards. To find
out the location of your nearest authorised treatment facility, offering free of charge take-back, simply contact one of our
dealers or refer to the Fiat web site or call the toll free number 00800 3428 0000.
*Passenger transportation vehicles to seat a max. of nine persons, having a total admissible weight of 3.5 t
174-211 Doblo GB 16-12-2008 14:26 Pagina 211

215INDEX
Rearview mirrors
- electric ....................................... 56
- exterior ..................................... 55
- interior ...................................... 55
Rev counter .................................. 24
Reversing light ............................... 134
Rims ........................................ 183-185
Roof bars
- fasteners presetting ................ 86
Rubber tubing................................ 168
SBR system ................................. 10
Seat adjustment ............................ 48
Seat belts
- general warnings...................... 13
- height adjustment.................... 11
- maintenance ............................ 14
- use .............................................. 9
Seats
- accessing the rear seat........... 52
- adjustments .............................. 48
- cleaning ...................................... 173
- electrically heated ................... 49
- passenger folding seat ............ 50
Side doors ...................................... 75
Side/taillights
- control ...................................... 63- front bulb replacement .......... 133
- rear bulb replacement ........... 134
Snow chains ................................... 116
Snow tyres .................................... 117
Sound system ............................... 97
- setup system ............................ 97
- sound system installation ...... 98
Spark plugs
- maintenance ............................. 181
- type............................................. 179
Starting the engine ....................... 105
- bump starting ........................... 121
- diesel versions ......................... 107
- emergency startup ......... 107-119
- ignition switch .......................... 20
- jump starting ............................ 120
- petrol versions......................... 106
- stopping the engine ................ 108
- warming up the engine .......... 107
Steering column lock ................... 20
Steering column stalks
- left-hand stalk ......................... 63
- right-hand stalk ........................ 64
Steering wheel adjustment ......... 55
Steering........................................... 183
Stopping the engine ..................... 107
Storing the vehicle ....................... 118Structure ........................................ 183
Sun visors ....................................... 71
Suspensions .................................. 182
Symbols........................................... 6
Tailgate.......................................... 79
Technical characteristics ............ 174
Third brake lights ........................ 136
Tilting shelf ................................... 71
Tools ............................................... 121
Top speed ...................................... 186
Towing a trailer
- assembly diagram .................... 114
- tow hitch installation .............. 114
- warnings ................................... 113
Towing the vehicle ....................... 146
Transmission ................................ 182
Transporting children in safety . 15
Trip computer .............................. 36
Tyre pressure................................ 185
Tyres
- if a tyre is punctured .............. 121
- inflation pressure .................... 184
- reading ....................................... 184
- standard..................................... 185
Using the gearbox ..................... 109
212-220 Doblo GB 16-12-2008 14:26 Pagina 215