2.8 FIAT DUCATO 244 2005 3.G Owner's Guide

215TECHNICAL SPECIFICATIONS
FUEL SUPPLY/IGNITION
Petrol version
Electronic Multipoint sequential
phased integrated electronic injection
and ignition; a single injection system
controls both functions. It processes
both the time the injection lasts (for
fuel metering) and the ignition advance
angle.FUEL SUPPLY
JTD/JTD POWER versions
UNIJET (Common Rail) electronic
control direct injection, turbosuper-
charger with WASTEGATE valve and
intercooler (2.3 JTD, 2.8 JTD and 2.8
JTD POWER versions).SPARK PLUGS
The cleanness and soundness of the
spark plugs are very important for
keeping the engine efficient and pol-
luting emissions down.
The appearance of the spark plug, if
examined by an expert eyes, is a good
way of pinpointing a problem even if it
has nothing to do with the ignition sys-
tem. Therefore, if the engine has prob-
lems, it is important to have the spark
plugs checked at a Fiat Dealership.
The spark plugs must be
changed at the times
specified in the
SERVICE
SCHEDULE
. Only use the type of
plugs indicated: if the heat ratio
is less than required or the life
specified is not guaranteed, prob-
lems can arise.
Modifications or repairs to
the fuel feed system that
are not carried out properly or do
not take the system’s technical
specifications into account can
cause malfunctions leading to the
risk of fire.
WARNING

217TECHNICAL SPECIFICATIONS
ELECTRONIC AUTOMATIC
GEARBOX
(2.8 JTD versions only)
Automatic gearbox with four speeds
plus reverse with self-adapting control
(i.e. capable of adapting to the driver’s
driving style), which transmits power
continuously and with very fast elec-
tro-hydraulic gear engagement times.SUSPENSIONS
FRONT
Independent wheel, McPherson sus-
pension.
Telescopic dampers with flexible an-
chorage to the body and dust guards
on buffers.
Coil springs offset with shock ab-
sorbers and knock-guard buffers.
Lower wishbone with twin taper
rubber bushing on chassis and ball
head on wheel stud.REAR
Rigid tubular axle type.
Lengthways single blade (two-blades
as optional) leaf spring.
Vertical shock absorbers anchored
above on the body (on the inside of
the wheelhouse) and down on the
axle flange.
Knock-guard buffer fixed to the side
member.
Coupling for brake load proportion-
ing.

220TECHNICAL SPECIFICATIONS
COLD TYRE INFLATION PRESSURE (bar)
Version
11
All types
Camping Car
15
All types (**)
2.8 JTD POWER
Camping Car
MAXI
All types (**)
2.8 JTD POWER
Camping Car
(*) 4.75 bar for vehicles with maximum admitted load on rear axle over 2000 kg.
(**) Except 2.8 JTD POWER versions
For warm tyres the pressure should be +0.3 bar in relation to the prescribed value.
Check again the correct pressure when the tyres are cold.Tyre
195/70 R15C 103/101 Q
205/70 R15C 106/104 Q
215/70 R15C 109/107 Q Camping
205/70 R15C 106/104 Q
205/70 R15C 106/104 R
215/70 R15C 109/107 Q Camping
205/75 R16C 110/108 Q
215/75 R16C 113/111 Q
205/75 R16C 110/108 R
215/75 R16C 113/111 R
215/75 R16C 113/111 Q Camping Rim
6J x 15” - H2
6J x 15” - H2
6J x 15” - H2
6J x 15” - H2
6J x 15” - H2
6J x 16” - H2
6J x 16” - H2
6J x 16” - H2Inflation pressure (bar)
Unladen and fully loaded
Front
4.0
4.0
5.0
4.1
4.1
5.0
4.5
4.5
4.5
4.5
5.5Rear
4.0
4.0
5.0
4.5
4.5
5.0
4.5 (*)
4.5
4.5 (*)
4.5
5.5

221TECHNICAL SPECIFICATIONS
Snow tyres
Version
11
All types
Camping Car
15
All types
2.8 JTD POWER
Camping Car
MAXI
All types
2.8 JTD POWER
Camping Car
(*) 4.75 bar for vehicles with maximum admitted load on rear axle over 2000 kg.
For warm tyres the pressure should be +0.3 bar in relation to the prescribed value.
Check again the correct pressure when the tyres are cold.Tyre
195/70 R15C 103/101 Q M+S
205/70 R15C 106/104 Q M+S
205/70 R15C 106/104 Q M+S
205/70 R15C 106/104 Q M+S
205/70 R15C 106/104 R M+S
205/70 R15C 106/104 Q M+S
205/75 R16C 110/108 Q M+S
205/75 R16C 106/104 R M+S
205/75 R16C 110/108 Q M+S Rim
6J x 15” - H2
6J x 15” - H2
6J x 15” - H2
6J x 15” - H2
6J x 15” - H2
6J x 16” - H2
6J x 16” - H2
6J x 16” - H2Inflation pressure (bar)
Unladen and fully loaded
Front
4.0
4.0
4.1
4.1
4.1
4.1
4.5
4.5
5.5Rear
4.0
4.0
4.5
4.5
4.5
4.5
4.5 (*)
4.5
5.5

226TECHNICAL SPECIFICATIONS
PERFORMANCE
Top speedsallowable after running in kph
Versions/engines 11-2.0 11-2.0 JTD 11-2.3 JTD 11-2.8 JTD 15-2.0 15-2.0 JTD
144 (*) 136 (*) 149 (*) 152 (*) 144 (*) 136 (*)
135 (**) 128 (**) 145 (**) 148 (**) 135 (**) 128 (**)
* All Van versions-According to the specific version
** All Truck versions
Versions/engines 15 15 15MAXIMAXI MAXI MAXI
2.3 JTD 2.8 JTD 2.8 JTD 2.0 2.3 JTD 2.8 JTD 2.8 JTD
POWER POWER
149 (*) 152 (*) 159 136 (*) 147 (*) 152 (*) 159
145 (**) 148 (**) 152 (❐)128 (**) 143 (**) 148 (**) 152 (❐)
* All Van versions-According to the specific version
** All Truck versions
(❐) If Camping Car tyres are fitted

227TECHNICAL SPECIFICATIONS
VAN WEIGHTS
Weights (kg)
Version 11 (*)
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including
driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
* The figures given refer to panelled and glazed vans with medium and short wheelbase, both high and low sided.2.0
1695 ÷ 1780
1120 ÷ 1170
1600
1600
2865 ÷ 2900
2000
750
80
1002.0 JTD
1755 ÷ 1840
1060 ÷ 1145
1600
1600
2900
1600
750
80
1002.3 JTD
1825 ÷ 1910
990 ÷ 1075
1600
1600
2900
2000
750
80
1002.8 JTD
1850 ÷ 1935
965 ÷ 1050
1600
1600
2900
2000
750
80
100

228TECHNICAL SPECIFICATIONS
Weights (kg)
Version 15 (*)
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
* The figures given refer to panelled and glazed vans with long, medium and short wheelbase, both high and low sided.2.0
1695 ÷ 1865
1435 ÷ 1510
1750
1850
3245 ÷ 3300
2000
750
80
1002.0 JTD
1755 ÷ 1840
1435 ÷ 1505
1750
1850
3300
1600
750
80
100
2.3 JTD
1725 ÷ 1995
1305 ÷ 1475
1750
1850
3300
2000
750
80
100
2.8 JTD
2.8 JTD POWER
1850 ÷ 2020
1280 ÷ 1450
1750
1850
3300
2000
750
80
100

229TECHNICAL SPECIFICATIONS
Weights (kg)
Version MAXI (*)
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle (3):
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
(3) See “Cold tyre inflation pressure”.
* The figures given refer to panelled and glazed vans with long and medium wheelbase, both high and low sided.2.0
1765 ÷ 1915
1585 ÷ 1735
1850
2120
3500
2000
750
80
1002.3 JTD
1895 ÷ 2045
1455 ÷ 1605
1850
2120
3500
2000
750
80
100
2.8 JTD
2.8 JTD POWER
1935 ÷ 2070
1430 ÷ 1565
1850
2120
3500
2000
750
80
100

230TECHNICAL SPECIFICATIONS
PANORAMA WEIGHTS
Weights (kg)
Short wheelbase version
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.2.0
1925
8P + 431 kg
1600
1600
2900
2000
750
80
1002.0 JTD
1985
8P + 371 kg
1600
1600
2900
1600
750
80
1002.3 JTD
2055
8P + 301 kg
1600
1600
2900
2000
750
80
1002.8 JTD
2080
8P + 276 kg
1600
1600
2900
2000
750
80
100

231TECHNICAL SPECIFICATIONS
Weights (kg)
Medium wheelbase version
GRAND VOLUME
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.2.3 JTD
2195
8P + 561 kg
1750
1850
3300
2000
750
80
100 2.0
2065
8P + 691 kg
1750
1850
3300
2000
750
80
1002.8 JTD
2220
8P + 536 kg
1750
1850
3300
2000
750
80
100