ignition FIAT IDEA 2007 1.G Owners Manual

RESPECTING THE ENVIRONMENT
A system for continuously monitoring emission system components to ensure greater environmental
protection is fitted in your car.
MUST BE READ!
ENGINE STARTING
Petrol engines:make sure that the handbrake is engaged; set the gearshift lever to neutral; fully depress
the clutch without pressing the accelerator, then turn the ignition key to AVV and release it as soon as
the engine has started.
Diesel engines:make sure that the handbrake is engaged; set the gearshift lever to neutral; fully depress
the clutch without pressing the accelerator, then turn the ignition key to MAR and wait for the
Yand
mwarning lights to go off; turn the ignition key to AVV and release it as soon as the engine has started.
PARKING ON FLAMMABLE MATERIAL
While working, the catalyst develops a very high temperature. Do not park the car over grass, dry leaves,
pine needles or any other inflammable materials: risk of fire.

REFUELLING
Petrol engines:only refuel with unleaded petrol with octane rating (RON) not less than 95.
Diesel engines:only refuel with diesel fuel conforming to the European specification EN590.
The use of other products or mixtures may irreparably damage the engine with invalidation of the warranty
due to the damage caused.
K

4
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLSSYMBOLS ............................................................................... 5
THE FIAT CODE SYSTEM ................................................. 5
KEY KIT AND DOOR LOCKING .................................. 7
IGNITION SWITCH ............................................................ 20
DASHBOARD........................................................................ 21
INSTRUMENT PANEL ....................................................... 24
INSTRUMENTS ..................................................................... 25
MULTIFUNCTION DISPLAY ........................................... 27
RECONFIGURABLE MULTIFUNCTION DISPLAY ... 35
STEERING WHEEL ADJUSTMENT ................................ 68
SEAT ADJUSTMENT .......................................................... 69
HEAD RESTRAINTS ............................................................ 76
REARVIEW MIRRORS ......................................................... 78
HEATING/CLIMATE
CONTROL SYSTEM ........................................................... 80
HEATING AND VENTILATION ...................................... 82
MANUAL CLIMATE CONTROL SYSTEM ................... 85
AUTOMATIC TWO-ZONE CLIMATE CONTROL
SYSTEM .................................................................................. 89
EXTERNAL LIGHTS............................................................. 100
WINDOW WASHING ....................................................... 104
CRUISE CONTROL ............................................................ 108CEILING LIGHTS ................................................................. 111
LIGHT CONTROL BUTTONS ......................................... 114
INERTIAL FUEL CUT-OFF
SWITCH.................................................................................. 116
INTERIOR FITTINGS ......................................................... 117
SMOKERS’ KIT ...................................................................... 122
SUNROOF.............................................................................. 123
POWER WINDOWS ......................................................... 125
REAR WINDOW WINDERS ............................................ 128
BOOT ...................................................................................... 128
BONNET ................................................................................ 134
ROOF RACK/SKI RACK .................................................... 136
HEADLIGHTS ........................................................................ 136
ABS SYSTEM ......................................................................... 138
EOBD SYSTEM ..................................................................... 140
SOUND SYSTEM .................................................................. 141
ACCESSORIES PURCHASED BY THE OWNER ......... 143
“DUALDRIVE” ELECTRIC POWER
STEERING SYSTEM ............................................................. 144
PARKING SENSORS ........................................................... 146
AT THE FILLING STATION ............................................. 148
PROTECTING THE ENVIRONMENT ............................ 150
D D
A A
S S
H H
B B
O O
A A
R R
D D
A A
N N
D D
C C
O O
N N
T T
R R
O O
L L
S S

SYMBOLS
Special coloured labels have been attached near or actually on some of
the components of your Fiat Idea. These labels bear symbols that remind
you of the precautions to be taken as regards that particular component.
The plate summarising the symbols used can be found under the bonnet.
THE FIAT CODE SYSTEM
To further protect you car from theft, it has been fitted with an engine
immobilising system. This system is automatically activated when the
ignition key is removed.
An electronic device, in fact, is fitted in each ignition key grip. The device
transmits a radio-frequency signal when the engine is started through a
special aerial built into the ignition switch. The modulate signal, which
changes each time the engine is started, is the “password”, by means of
which the control unit recognises the key and enables to start the engine.
OPERATION
Each time the car is started turning the ignition key to MAR, the Fiat
CODE system control unit sends a recognition code to the engine
control unit to deactivate the inhibitor.
The code is sent only if the Fiat CODE system control unit has
recognised the code transmitted from the key.
Each time the ignition key is turned to the STOP position, the Fiat CODE
system deactivates the functions of the engine electronic control unit.
5
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
F0H0012m

At starting, if the code has not been recognised
correctly, the warning light
Ywill come on.
In this case, the key should be moved to the STOP
position and then back to MAR; if the lock continues,
possibly try again with the other key provided with the
car. If it is still not possible to start the car, follow the
instructions given in chapter “In an emergency” and
then contact a Fiat Dealership.
IMPORTANT Every key has its own code, which must
be memorised by the system control unit. To
memorise new keys, up to a maximum of eight, apply
to Fiat Dealership.Warning light Ycoming on when driving
❒If the warning light
Yturns on, this means that
the system is running a self-test (for example for a
voltage drop). At the first stop, turn the ignition
key to STOP and then to MAR again: if no failure is
detected warning light
Ywill not come on.
❒If the warning light
Ystays on, repeat the
procedure described previously leaving the key at
STOP for over 30 seconds. Should the
inconvenience persists, contact a Fiat Dealership.
❒If the warning light
Ystays on this means that the
code has not been recognised. In this case, the key
should be moved to the STOP position and then
back to MAR; if the lock continues, possibly try
again with the other key provided with the car. If it
is still not possible to start the car, follow the
instruction given in chapter “In an emergency”) and
then contact a Fiat Dealership.
6
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
The electronic components inside the key may be damaged if the key is submitted to sharp knocks.

MAIN KEY WITH REMOTE CONTROL
The metal insert (A) of the key is grip-retractable.
The key operates:
❒the ignition switch;
❒driver’s door lock;
❒passenger side airbag deactivation switch;
❒the dead lock device (where provided).
❒cut-in of door lock device (D) when the electric system is failing (e.g.
run-down battery);
❒cut-in of child lock safety device (E) on rear doors.
Button (B) opens the metal insert (A).
To refit the metal insert (A) into the key grip:
– keep button (B) pressed
– move the metal insert (A)
– release button (B) and then turn the metal insert (A) until hearing the
click as it locks into place.
Button
Ëunlocks the doors, the tailgate and the fuel cap.
Button
Álocks the doors, the tailgate and the fuel cap.
Button
Runlocks the boot.
Led (C) (where required) comes on when sending the control to the
receiver.
8
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
F0H0015m
WARNINGButton (B) should only be pressed when the key is away from the body, in
particular from the eyes and from objects that can be spoilt (e.g. clothes). Make
sure the key can never be touched by others, especially children, who may
inadvertently press the button.
F0H0246m

12
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
EMERGENCY DEVICE FOR LOCKING DOORS FROM THE
OUTSIDE
Doors are fitted with a special device enabling to lock all doors when the
electric system is failing (no current).
To lock the doors:
❒fit the ignition key into the revolving plug (B)
❒turn the device to position 1 and close the door.
To open the doors:
❒fit the ignition key into the revolving plug of the driver’s door and
turn it counterclockwise
❒open the driver’s door
❒once inside the car, open the other doors using the levers set on
door handles.
F0H0247m
Never operate the child lock device and the door handle at the same time.WARNING

14
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
KEY WITHOUT REMOTE CONTROL (SPARE KEY)
(where required)
The metal insert (A) of the key is grip-retractable.
The key operates:
❒the ignition switch;
❒the driver’s door;
❒passenger side airbag deactivation switch;
❒the dead lock device (where provided);
❒cut-in of door lock device (C) when the electric system is failing (e.g.
run-down battery;
❒cut-in of child lock safety device (D) on rear doors.
Button (B) opens the metal insert (A).
To refit the metal insert (A) into the key grip:
– keep button (B) pressed
– move the metal insert (A)
– release button (B) and then turn the metal insert (A) until hearing the
click as it locks into place.F0H0014m
WARNINGButton (B) should only be pressed when the key is away from the body, in
particular from the eyes and from objects that can be spoilt (e.g. clothes). Make
sure the key can never be touched by others, especially children, who may
inadvertently press the button.
F0H0322m

KEY WITHOUT REMOTE CONTROL (SPARE KEY)
(where required)
The metal insert (A) of the key is fixed.
The key operates:
❒the ignition switch;
❒the driver’s door;
❒passenger side airbag deactivation switch;
❒the dead lock device (where provided);
❒cut-in of door lock device (C) when the electric system is failing (e.g.
run-down battery);
❒cut-in of child lock safety device (D) on rear doors.
15
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
F0H0340m
F0H0322m

Device activation (where provided)
The device is automatically activated on every door in the following
cases:
❒turning twice the metal insert of the key (A) in closing direction;
❒pressing twice button
Á.
Device activation is signalled by three flashings of the direction indicators and
flashing of the deterrence led (see the table on next page).
Should one of the doors be not perfectly closed, the dead lock device is not
activated, thus preventing that a person getting into the car from the open door
remains blocked inside the passenger’s compartment when he/she closes the
door.
Device deactivation (where provided)
The device is deactivated automatically on every door in the following
cases:
❒when unlocking the doors;
❒when unlocking only the driver’s door;
❒when turning the ignition key to MAR.
18
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
F0H0020m

IGNITION SWITCH
The key can be turned to 3 different positions:
❒STOP: engine off, key can be removed, steering column locked.
Certain electrical devices (e.g.: sound system, power windows…) can
work.
❒MAR: driving position. All electrical devices are powered.
❒AVV: engine starting (unstable position).
The ignition switch is fitted with a safety mechanism that, in the event the
engine is not started, turns back the ignition key to STOP before
repeating the starting operation.
STEERING COLUMN LOCK
Engaging
When the key is to STOP remove the key and turn the steering wheel
until it locks.
Disengaging
Rock the steering wheel slightly as you turn the ignition key to MAR.
20
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Never remove the ignition key while the car is moving. The steering wheel would
automatically lock as soon as you try to turn it. This also applies when the car is
being towed.WARNING
WARNINGWhen getting out of the car, always remove the key to prevent any occupants from
accidentally activating the controls. Remember to engage the handbrake. If the car is
parked on uphill slope to engage the first gear. If the car is facing downhill, engage
the reverse gear. Never leave unsupervised children in the car.
F0H0021m
If the ignition device is tampered with (e.g.: attempted theft), have it checked over
by a Fiat Dealership.WARNING