bluetooth FIAT IDEA 2009 1.G Blue And Me Manual

59
Problem Probable Cause Possible Solution
Display screen shows: PAIR. FAILED
Or the system says “Bluetooth pairing
timed out. Please try again later.”
Display screen shows:
PRIVATE NUMBER
Display screen shows: ONLY AT REST
Or the system says:
“This function is only available
when the vehicle is stationary”
Retry the pairing procedure. During the
PIN entering step, verify that the PIN
number you are entering on the mobile
phone is the same number that
is shown
on the instrument panel display

SETTING FUNCTIONS -
PAIRING YOUR MOBILE PHONE
Enter a contact in your mobile
phonebook for the incoming call,
and then download your phonebook/
contact again
In this case, nothing can be done and
the message will always appear
Stop your car and attempt to perform
the function again manually,
or continue driving and perform the
function using the voice recognition
system After three minutes, each attempt to
enter the PIN number fails since
pairing timed out
❒The caller is not recognized as a
name stored in the phonebook,
and the paired mobile phone does
not have a called ID feature
❒The caller has blocked caller ID
to prevent the system from
displaying the caller’s name
and/or phone number
Even occasional short viewings of the
car display may be hazardous if your
attention has been diverted away from
your driving tasks. Certain Blue&Me™
functions, which require the user to
give attention to the car display, are
only available when the car is stopped
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:41 Pagina 59

61
Problem Probable Cause Possible Solution
The system prompted to enter a PIN
number, but no phone pairing
procedure was running
When in close proximity of the car,
answering a phone call directly using
the mobile phone “answer” button, will
automatically activate the free-hands
phone function (the caller’s voice is
played through the car speakers)
Select option DELETE USERSon
the system and delete all pairings; then,
pair the phone again

SETTING FUNCTIONS -
MANAGING USER DATA AND
PHONEBOOK

SETTING FUNCTIONS - PAIRING
YOUR MOBILE PHONE
Refer to your mobile phone owner’s
manual to find out how to set up the
default location for phone audio when a
phone call is received After you delete the pairing-related
user information on your mobile
phone, the Bluetooth
®pairing
relationship between your mobile
phone and Blue&Me™will no
longer work
Some types of mobile phones require
you to set the phone to choose
between automatic incoming call
transfer to the system or
non-automatic incoming call transfer
(you will transfer the call using the
mobile phone keypad, as required)
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:41 Pagina 61

MESSAGE READER
Problem Probable Cause Possible Solution
I receive SMS messages on the
cellular telephone but not on
Blue&Me™
SMS texts received from your phone
carrier service center show abnormal
displaying of sender's name or number
Blue&Me™stopped receiving
messages from your cellular
telephone
You cannot display some SMS
messages, present on your cellular
telephone, on Blue&Me™SMS
message list
Not all cellular telephones support
SMS messages transfer to Blue&Me™
Not all mobile phones support correct
transfer of the phone carrier's name
sending the SMS text to Blue&Me™
You might have set by mistake
the option NOT ACTIVE from menu
Notification settings
Blue&Me™is capable to read and
store last 20 received SMS messages
while the telephone set is connected to
the system. Messages received in other
contexts are not transferred to
Blue&Me™Check that your cellular telephone
supports the function for transmitting SMS
Messages by Bluetooth technology or, for
further information, see chapter “LIST OF
TELEPHONE SETS SUPPORTED BY
Blue&Me™”, or site www.fiat.com
–
Set, on menu notification settings,
either VISUAL+ACOUSTIC notification
or NOT VISUAL notification

READER FUNCTIONS
SMS MESSAGES, paragraph
NOTIFICATION SETTINGS
SMS messages stored by Blue&Me™ can
be deleted

READER FUNCTIONS SMS
MESSAGES, paragraphs SMS MESSAGES
MANAGEMENT AND DELETING ALL
SMS MESSAGES
64
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:41 Pagina 64

PERSONAL DATA PROTECTION
Blue&Me™ functions entail personal data handling. In order to protect and to prevent non-authorized access to personal data,
Blue&Me™has been implemented with the following criteria:
❒Personal data connected to hands-free kit functions (phonebook and last calls) can only be accessed after automatic recognition
of your Bluetooth®wireless technology enabled mobile phone;
❒
Stored personal data can be deleted using the specific Blue&Me™functions.

For further details on how to delete personal data, refer to section SETTINGS FUNCTION - MANAGING USER DATA.
IMPORTANT Take into account that when leaving your car at a service centre, personal data stored on Blue&Me™ (phonebook
and last calls) may be disclosed or may be subject to improper use. Before leaving your car at the service centre you can delete stored
data and phonebook from Blue&Me™.

For further details on how to delete personal data and phonebook, refer to section SETTINGS FUNCTION - MANAGING USER
DATA.
72
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:41 Pagina 72