low beam FIAT IDEA 2012 1.G User Guide

147
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
IF AN EXTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT LIGHT UNITS
The front light units contain the sidelights,
the dipped beam, main beam, direction in-
dicator and fog light bulbs.
To change the bulbs of the sidelights, low
beams, direction indicators and fog lights
it is necessary to remove the cover A-
fig. 18releasing the catch B.
fig. 18F0H0179mfig. 19F0H0180m
The bulbs are arranged inside the light unit
fig. 19 as follows:
G: direction indicators
F: main beam headlights
E: sidelights
D: fog lights
C: dipped beam headlights
After replacement, refit the covers cor-
rectly checking that they are properly se-
cured.MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒turn the cap A-fig. 20anticlockwise
and remove it;
❒disconnect the electrical connector B-
fig. 21;
❒release the bulb catch C-fig. 21;
❒remove the bulb D-fig. 21and change
it;
❒refit the catch C-fig. 21, connect the
electrical connector Band fit the cap
A-fig. 20turning it clockwise. Put the
cap ventilation outlet H-fig. 20from
the top downwards.
133-160 idea GB 1 ed 10-07-2008 8:30 Pagina 147

148
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
fig. 20F0H0181mfig. 21
C
B
D
F0H0214m
fig. 22F0H0182m
DIPPED BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒remove the protective cover releasing
the relevant catch;
❒disconnect the electrical connector F-
fig. 22;
❒release the bulb catch E;
❒remove the bulb Gand change it;
fig. 23F0H0183m
DIRECTION INDICATORS
Front
To change the bulb, proceed as follows:
❒remove the protective cover releasing
the relevant catch;
❒turn the bulb holder A-fig. 23counter-
clockwise and remove it;
❒remove the bulb lightly pushing it and
turning it counter-clockwise (“bayo-
net”);
❒replace the bulb;
❒refit the bulb holder turning it clock-
wise, checking that it is secured cor-
rectly.
❒refit the protective cover correctly
❒fit a new bulb making the tabs of the
metallic part coincide with the grooves
on the reflector, then hook the bulb
holder catch Eand re-connect the
electrical connector F;
❒refit the protective cover correctly.
133-160 idea GB 1 ed 10-07-2008 8:30 Pagina 148

201
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
DASHBOARD
AND CONTROLS
INDEX
Dipped beam headlights
– bulb replacement ................. 148
– control .................................. 59
Direction indicators ................. 59
– bulb replacement ................. 148
– control .................................. 59
Door pockets ............................. 69
Doors ........................................ 17-134
Emergency device for locking
doors from the outside ...... 17-134
Dualdrive
(electric power steering) ...... 87
EBD (electronic brake force
distributor) ................................. 83
Emergency device for locking
doors from the outside ......... 17
Engine
– fuel feed ................................. 187
– identification code ............... 184
– injection/ignition ................. 187– technical data ....................... 185
Engine coolant gauge................. 19
Engine coolant level ................ 170
Engine oil
– checking level........................ 169
– consumption ......................... 169
– technical specifications ....... 195
EOBD (system) ......................... 84
External lights ............................. 58
Fiat CODE (system) ............... 9
Fix &Go (tyre repair kit) ......... 136
Flashing the headlights ............. 58
Fluids and lubricants ................ 196
Follow me home (device) ....... 59
FPS (fuel cut-off switch) .......... 67
Front fog lights
– bulb replacement ................. 149
– control button ...................... 66Fuel
– consumption ......................... 198
– fuel cut-off switch ................ 67
– level gauge ............................ 19
Fuel cut-off switch ..................... 67
Fuel filler cap............................... 91
Fuses ............................................. 153
Gearbox (use). .......................... 115
Glass/can holders ....................... 69
Handbrake ................................. 114
Hazard lights
– control .................................. 66
Head restraints ......................... 41
Headlights ................................... 82
(electric adjusting device) ..... 82
Heated rear window ............... 44
Heating and ventilation............. 45
Identification data .................... 182
Ignition switch ........................... 18
200-208 idea GB 1 ed 10-07-2008 10:58 Pagina 201