dashboard FIAT MULTIPLA 2007 1.G Workshop Manual

54
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
The system uses R134a cooling fluid, which if accidentally spilt, does not damage the environment.
Never use R12 fluid, which could damage the system components.
AUTOMATIC CLIMATE CONTROL SYSTEM
This is a passenger compartment temperature control system that
automatically adjusts:
❒the temperature of the air directed to the vents to reach the
temperature selected with knob (A);
❒continuous fan speed with knob (C) in
AUTOposition.
CONTROLS
A - Knob for selecting the temperature in the passenger compartment
with extreme positions for
HIand LOmaximum and minimum air
temperature) functions.
B - Switch to turn on the air recirculation, preventing outside air from
entering the passenger compartment. When the light on the switch is
on, the recirculation system is operating.
C - Knob to activate the fan: this can be used to select manual or
automatic operation.
F0E0050m

55
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
D - Switch to turn the compressor on and off. When
this switch is pressed it automatically starts the fan
at the first speed if knob (C) is at p. When the
compressor is on the led on the switch lights up.
E - Knob for manual air distribution selection.
If this knob is positioned to max/def, it sets the system
for defrosting/demisting.
The system is fitted with a pollen filter to clean the
incoming air. To replace this filter, refer to section
“Service schedule”
HEATING
1) Air temperature knob: pointer to the required
temperature.
2) Fan knob:
– pointer to the speed required;
– pointer to
AUTOfor automatic operation of the
fan.
The system limits the fan speed until the fluid reaches
the temperature required to prevent cool air entering
the passenger compartment.3) Air distribution knob, pointer to:
≤to warm the feet and demist the windscreen at
the same time;
μto warm the feet and keep the face cool
(“bilevel” function);
wto generally warm the feet in the front and back.
4) Recirculation switch:
to rapidly warm the passenger compartment, press the
switch
T(led on) to recirculate the air already in
the passenger compartment.
IMPORTANT For maximum heating:
❒turn knob (A) to
HI;
❒turn knob (C) to 4.
DEMISTING AND/OR DEFROSTING
Air distribution knob, pointer to:
-to demist windscreen and front side windows.

57
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
COOLING
1) Central air vents and side vents fully open.
2) Air temperature knob to the required temperature.
3) Fan knob:
❒pointer to the required speed;
❒pointer to auto, for automatic operation of the
fan.
4) Air distribution knob: pointer on
¥.
5) Compressor switch
√pressed (led on).
6) Recirculation switch
Tpressed (led on) to speed
up cooling.
To moderate cooling: turn switch
Toff, select a
higher temperature and reduce fan speed.RECIRCULATION
When switch
Tis pressed (led on) only internal air
circulates.
IMPORTANT When the outside temperature is very
high, switching on the recirculation system will cool
the air more quickly. Moreover it is very useful when
the outside air is heavily polluted (in a traffic jam,
tunnel, etc.). You are advised against using this facility
for long periods, especially if there are many people in
the car.
IMPORTANT Do not use the air recirculation function
on rainy/cold days as it would considerably increase
the possibility of the windows misting inside.

59
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
EXTERNAL LIGHTS
LEFT-HAND STALK
This stalk groups together the external lights and the direction indicators.
The external lights can only be switched on when the ignition key is at
MAR.
When the external lights are turned on: the instrument panel and the
symbols of the various controls located on the dashboard will turn on.
Side and taillights
These come on when you turn the knurled switch from O to
6.
Instrument panel indicator light
3comes on.
Dipped beams
These come on when you turn the knurled switch from
6to 2.
Main beams
These come on when, with knurled knob at
2, you push the stalk
forward towards the dashboard.
Instrument panel indicator
1comes on.
To switch them off, pull the stalk towards the steering wheel.
F0E0051m
F0E0052m
F0E0053m

60
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
To flash the lights
Pull the stalk towards the steering wheel (unstable position).
Direction indicators
Move the stalk:
up - to switch on the right-hand direction indicator
down - to switch on the left-hand direction indicator.
Instrument panel warning light
ywill flash.
Indicators are switched off automatically when the steering wheel is
straightened.
If you want the indicator to flash briefly to show that you are about to
change lane, move the stalk up or down without clicking into position.
When released the stalk will return to its home position.
F0E0054m
F0E0055m

61
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Never use the window wiper to remove ice or snow from the windscreen. In these conditions, the
wiper is submitted to excessive effort that results in motor protection cutting in and wiper
operation inhibition for few seconds as a consequence. If operation is not restored contact Fiat
Dealership.
WINDOW CLEANING
WINDSCREEN WIPER/WASHER
This device can only work when the ignition key is at MAR.
A - Windscreen wiper off.
B - Flick wipe.
C - Slow continuous wipe.
D - Fast continuous wipe.
E - Temporary fast continuous wipe (unstable position): when the stalk is
released, it returns to position (A) automatically stopping the wiper.
When the stalk is pulled towards the steering wheel, the windscreen and
headlight washer jets starts operating (where fitted) providing the dipped
beam headlights are switched on.
F0E0056m
F0E0057m

62
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Never use the rear window wiper to remove ice or snow from the rear window. In these conditions,
the wiper is submitted to excessive effort that results in motor protection cutting in and wiper
operation inhibition for few seconds as a consequence. If operation is not restored contact Fiat
Dealership.REAR WINDOW WASHER/WIPER
This device can only work when the ignition key is on MAR.
Controls:
1) turn the knurled ring (A) from åto': continuous wipe;
2) push the stalk forwards (unstable position) to operate the rear
window washer/wiper jets; release the stalk to stop.
F0E0058m

63
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
CEILING LIGHT
FRONT CEILING LIGHT
Switch (A) turns the ceiling lights on/off.
Switch (B) controls the spot light.
According to the position, you can have the following conditions:
❒with switch (A) in centre position, ceiling lights (C) and (D) will turn
on when front doors are opened;
❒with switch (A) moved to the left, ceiling lights (C) and (D) are off and
will not turn on when opening or unlocking the doors;
❒with switch (A) moved to the right, ceiling lights (C) and (D) remain
on.
Switch (B) turns the following lights on separately:
❒map light (C) if moved to the left;
❒map light (D) if moved to the right.
IMPORTANT Before getting out of the car, make sure that both switches
are in centre position; ceiling lights will turn off when doors are closed,
saving the battery.
F0E0065m
F0E0236m

64
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
REAR CEILING LIGHTS
Ceiling lights turn on when rear doors are opened. With doors closed
they can be turned on/off by pressing (A).
In car versions with double sunroof the ceiling lights are located between
the two roofs.
F0E0067m

65
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
CONTROLS
HAZARD LIGHTS
They come on when switch (D) is pressed regardless of the position of
the ignition key.
When the device is on, the switch flashes. Press the switch again to turn
the lights off .
CONTROL BUTTONS
These are located in the centre of the dashboard.
They only work with the ignition key at MAR (except the hazard lights).
When the function is active, the light on the relevant button comes on.
To disable the function, press the button again.
Front fog lights
Button (A): to activate these lights it is necessary to have the
side/taillights switched on.
Rear fog lights
Button (B): to activate these lights it is necessary to have the dipped
beams or the front fog lights switched on.
Heated rear window
Button (C) with time-controlled operation.
F0E0630m
F0E0235m
The use of hazard lights is governed by the Road Traffic Code of the country you
are in. Keep to the rules.WARNING