multijet FIAT PANDA 2007 169 / 2.G User Guide
[x] Cancel search | Manufacturer: FIAT, Model Year: 2007, Model line: PANDA, Model: FIAT PANDA 2007 169 / 2.GPages: 206, PDF Size: 3.49 MB
Page 165 of 206

WINDSCREEN/REAR WINDOW
WASHER FLUID fig. 9
To top up, remove the cap A.
Pour a mixture of water and TUTELA
PROFESSIONAL SC35, in the following
concentrations:
30% TUTELA PROFESSIONAL SC35 and
70% water in summer.
50% TUTELA PROFESSIONAL SC35 and
50% water in winter.
In case of temperatures below –20°C, use
undiluted TUTELA PROFESSIONAL SC35
fluid. ENGINE COOLANT fig. 7 and 8
The coolant level shall be checked with
cold engine and shall be within the MIN
and MAX marks on the tank.
If the level is low, pour slowly a mixture
of 50% distilled water and 50% PARAFLU
UP of the FL Selenia Group through the
filler neck Auntil the level reaches MAX.
A 50-50 mixture of PARAFLU UP and dis-
tilled water gives freeze protection to
–35°C.
For particularly hard climate conditions,
we recommend use of a 60% Paraflu UP
and 40% demineralized water mixture.
fig. 7 - 1.1 and 1.2 with air
conditioning system - 1.3 Multijet F0G0107mfig. 8 - 1.1 and 1.2 with heaterF0G0182mfig. 9
164
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
The engine cooling system us-
es protective antifreeze fluid
PARAFLU UP. Use the same
fluid type as that already in
the cooling system when topping up.
PARAFLU UP fluid cannot be mixed
with any other type of fluid. Should it
happen, under no circumstances start
the engine; contact a Fiat Dealership.
The cooling system is pres-
surised. If necessary, replace
the cap only with another genuine
one, otherwise system efficiency
could be compromised. Do not re-
move the reservoir cap when the en-
gine is hot: you risk scalding yourself.
WARNING
F0G0183m
155-176 Panda New GB 21-06-2007 13:52 Pagina 164
Page 181 of 206

180
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
ENGINE CODES - BODYWORK VERSIONS
Versions Engine code Body version
1.1
Actual - Active187A1000
(4-seat - euro 3)169AXA1A 00
(5-seat - euro 3)169AXA1A 00B
(4-seat - euro 4)169AXA1A 00C
(5-seat - euro 4)169AXA1A 00D
1.2
Dynamic - Emotion188A4000
(4-seat - euro 3)169AXB1A 01
(5-seat - euro 3)169AXB1A 01B
(4-seat - euro 4)169AXB1A 01C
(5-seat - euro 4)169AXB1A 01D
(*) Ecopack
(4-seat - euro 4)169AXB1A 01E
(5-seat - euro 4)169AXB1A 01F
1.3 Multijet 70HP
Dynamic - Emotion188A8000
(4-seat - euro 4)169AXC1A 03
(5-seat - euro 4)169AXC1A 03B
1.3 Multijet 75HP
Dynamic - Emotion169A1000
(4 posti - euro 4)169AXD1A 06 ()
(5 posti - euro 4)169AXD1A 06B ()
() Version with DPF
(*) Extended ratios to reduce CO
2emissions
177-196 Panda New GB 21-06-2007 13:53 Pagina 180
Page 182 of 206

181
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
ENGINE
GENERAL INFORMATION
Engine code
Cycle
Number and layout of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio rpm
Spark plugs
Fuel
1.3 Multijet 70HP
188A8000
Diesel
4 in line
69.6 x 82
1248
18 : 1
51
70
4000
145
14.8
1500
–
Diesel fuel for
motor vehicles
(Specification EN 590)1.3 Multijet 75HP
169A1000
Diesel
4 in line
69.6 x 82
1248
17.6 : 1
55
75
4000
145
14.8
1500
–
Diesel fuel for
motor vehicles
(Specification EN 590) 1.1
187A1000
Otto
4 in line
70 x 72
1108
9.6 : 1
40
54
5000
88
9.0
2750
NGK DCPR7E-N-10
BOSCH YR7DEU
Unleaded petrol
95 R.O.N.1.2
188A4000
Otto
4 in line
70.8 x 78.86
1242
9.8 : 1
44
60
5000
102
10.4
2500
NGK DCPR7E-N-10
BOSCH YR7DEU
Unleaded petrol
95 R.O.N.
177-196 Panda New GB 21-06-2007 13:53 Pagina 181
Page 183 of 206

182
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
FUEL FEED/IGNITION
1.1 - 1.2 1.3 Multijet
Fuel feed Multipoint sequential phased Direct injection with electronically
electronic injection, returnless system controlled Multijet “Common Rail”,
turbo and intercooler
Modifications or repairs to the fuel feed system that are not carried out properly or do not take the system’s
technical specifications into account can cause malfunctions leading to the risk of fire.
WARNING
TRANSMISSION
1.1 - 1.2 - 1.3 Multijet
Gearbox
Clutch
DriveFive forward gears and reverse with synchromesh for
forward gear engagement
Self-adjusting pedal without idle stroke
Front
177-196 Panda New GB 21-06-2007 13:53 Pagina 182
Page 184 of 206

183
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
disc (self-ventilating for 1.3 Multijet engine)
drum, self-centering shoes with control cylinder for each wheel
controlled by hand lever, it works on rear brakes
SUSPENSIONS
1.1 - 1.2 - 1.3 Multijet
Front
Rear
STEERING
1.1 - 1.2 - 1.3 Multijet
Type
Minimum steering
cycle mMc Pherson independent wheels, mechanical cross member,
shock absorbers and helical springs; stabiliser bar for versions with electric
power steering.
twisting axle with interconnected wheels; twisting axle and
two tubular arms with shock absorbers and helical springs.
rack and pinion with electric power steering (where provided)
9.1
BRAKES
1.1 - 1.2 - 1.3 Multijet
Service brakes:
– front
– rear
Parking brake
IMPORTANT Water, ice and antifreeze salt on roads may deposit on the brake discs thus reducing braking efficiency at first braking.
177-196 Panda New GB 21-06-2007 13:53 Pagina 183
Page 187 of 206

186
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
5,00 B x 13 H2
(steel)
5J x 14 H2
(alloy)4,50 B 13 HS135/80 B13 82M
135/80 R13 82P 155/80 R 13 79T
165/65 R 14 79T 155/80 R 13 79T M+S
165/65 R 14 79T M+S
2.0
2.0
2.2
2.2
2.0
2.02.2
2.2
2.3
2.3
2.2
2.22.2
2.2
2.2
2.2
2.2
2.2 1.8
1.8
1.8
1.8
1.8
1.8 155/80 R 13 79T
165/65 R 14 79T
155/80 R 13 79T
165/65 R 14 79T
155/80 R 13 79T M+S
165/65 R 14 79T M+S2.8 165/65 R 14 79T
(only for
Dynamic versions)
2.8 COLD TYRE INFLATION PRESSURE (bar)
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm.
Recheck pressure value with cold tyres.
Versions Tyre Medium load Full load Space-saverspare
Front Rear Front Rear wheel
Petrol
Multijet
Snow tyres
Version Rim Standard Snow Optional Space-saverspare wheeltyre tyre tyre Rim Tyre
Actual
Active
Dynamic
Emotion
177-196 Panda New GB 21-06-2007 13:53 Pagina 186
Page 189 of 206

188
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
BOOT VOLUME
Unladen boot volume (V.D.A. Standards) in dm
3
Single and double Rear slidingrear seat seat
Under rear parcel shelf with rear seat
in normal position
At waist edge with rear seat back rest folded
Max. to roof with rear seat back rest folded
Max. to roof with rear seat back rest folded
(with sunroof)
(*) With seat completely backward
(**) With seat completely forward206
490
860
815176 (*) / 235 (**)
416
786
741
PERFORMANCE
Top admitted speed after initial car use in km/h.
1.1
Actual
Active
1.2
Dynamic
Emotion
1.3 Multijet 70CV
Dynamic
Emotion
1.3 Multijet 75CV
Dynamic
Emotion150
150
155
155
160
160
165
165
177-196 Panda New GB 21-06-2007 13:53 Pagina 188
Page 190 of 206

189
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
1.3 Multijet
935
445
750
660
1380
900
400
50
60 1.2
860
445
730
660
1305
800
400
50
60 1.1
840
415
730
640
1255
800
350
50
60
WEIGHTS
Weights (kg)
Weight empty (including fluids,
90% fuel in the tank and no optional)
Payload (*) including the driver:
Maximum admitted loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof (***):
Maximum load on tow hitch
(trailer with brakes):
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload.
(**) Loads not be exceeded. The driver is responsible for arranging the loads in the boot and/or on the roof so that they
comply with these limits.
(***) Lineaccessori Fiat roof rack, max capacity: 50 kg.
177-196 Panda New GB 21-06-2007 13:53 Pagina 189
Page 191 of 206

190
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
1.3 Multijet
35 (▲)
5 (▲)
4.6
2.5 (●)
2.8 (●)
1.65
0.55
0.40
1.8 1.2
35
5
4.6
2.5
2.8
1.65
0.55
0.40
1.8 1.1
35
5
4.6
3.1
3.5
1.65
0.55
0.40
1.8
CAPACITIES
Fuel tank: litres
including a reserve of: litres
Engine cooling system:
litres
Engine sump: litres
Engine sump and filter: litres
Gearbox/differential casing:
litres
Hydraulic brake circuit:
- with ABS kg
- without ABS kg
Windscreen and rear window
washer fluid reservoir: litres
(❑) For particularly hard climate conditions, we recommend use of a 60% Paraflu UP and 40% demineralized water mixture.
Specified fuels and
recommended products
Unleaded petrol with no less
than 95 R.O.N.
(▲) Diesel fuel for motor vehi-
cles (Specification EN590)
Mixture of distilled water and
PARAFLU UPat 50%
(❑)
SELENIA 20K
(●) SELENIA WR
TUTELA CAR ZC 75 SYNTH
TUTELA TOP 4
Mixture of water and
TUTELA PROFESSIONAL
SC 35
177-196 Panda New GB 21-06-2007 13:53 Pagina 190
Page 192 of 206

191
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Use Fluid and lubricant specifications Original fluids and Change
for correct car operation lubricants
Oils for
petrol engines
Oils for
diesel engines
(1.3 Multijet
versions)
For regular operation of Multijet versions with DPF, use only original oil. In an emergency (lacking the original product) only top up
with max. 0,5 l and then drive immediately to the nearest Fiat Dealership.
If using non original SAE 5W-40 products, oils with minimum ACEA A3 specifications for petrol engines and ACEA B4 specifica-
tions for Diesel engines are admitted; in this event top engine performance is not guaranteed.
Use of products with low-quality properties than ACEA A3 and ACEA B4 could cause damages to the engine that are not covered
by the warranty.
For very cold climate conditions, ask Fiat Dealership for the appropriateSeleniaproduct to use. Synthetic-based oils, grade
SAE 10W-40, that pass ACEA A3 and API SL
specifications.
Synthetic-based oils, grade
SAE 5W- 40, that pass
ACEA B4, API CF and FIAT 9.55535- M2
specifications. SELENIA 20K
SELENIA WRAccording to
Service Schedule
According to
Service Schedule
177-196 Panda New GB 21-06-2007 13:53 Pagina 191