turn signal FIAT PANDA 2007 169 / 2.G Radio CD Tape Manual

75
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
The behaviour of the set during AutoSTore is as
follows:
❒at the beginning of the AutoSTore function all the
other functions are disabled;
❒pressing one of the radio function buttons, e.g.: 17
(PTY), 6 (N), 5 (
÷), 6 (O), 5 (˜), (7), (9), (10),
(13), (15), (16) the automatic storage process is
interrupted, the last station heard before
AutoSTore was turned on is tuned and the function
associated with the button pressed is run;
❒pressing button 14 (AF-TA) during AutoSTore will
interrupt it, the TA function (traffic information) will
be turned on/off and a new automatic storage
process will be started;
❒changing the listening source (Radio, Compact Disc,
CD Changer) during automatic storage will not
interrupt the AutoSTore function.
Activating the AutoSTore function in MW or LW
bands will automatically select the FMT band where
the function is then run.
IMPORTANT Sometimes the AutoSTore function is
unable to find 6 stations with a strong signal. In this
case the previous stations will be stored on the free
preset buttons.Listening to stored stations
Proceed as follows:
❒select the required frequency band (FM, MW, LW);
❒briefly press one of the six station storage buttons.
The display will show the number that corresponds to
the button.
In bands FM1, FM2 and FMT, if reception is poor and
the AF alternative frequency search function is active,
the station with the strongest signal that is
broadcasting the same programme will be sought
automatically.
AF function (alternative frequency search)
Within the RDS system the radio can work in two
different modes:
❒“AF ON”: alternative frequency search on (the
display shows “AF”);
❒“AF OFF”: alternative frequency search off.
051-098 ING 21-06-2007 15:49 Pagina 75

76
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
When the signal of the RDS station tuned weakens,
the following two cases may occur:
❒with “AF ON” the RDS system activates automatic
tuning of the optimum frequency of the station
chosen, with the stations enabled, therefore the
radio is automatically tuned to the station with the
strongest signal that is broadcasting the same
programme. During the journey it will thus be
possible to continue listening to the station chosen
without having to change the frequency when
changing area. Of course, the station being listened
to must be receivable in the area the car is crossing;
❒With “AF OFF” the radio will not tune the
strongest station automatically and it will have to be
found manually using the tuner buttons.
To turn the AF function on/off, keep button 14 (AF-
TA) pressed until hearing the beep. The name RDS (if
available) stays on the display and if the AF function
has been turned on the symbol “AF” is shown.
If the radio is working in the AM band, when button
14 (AF-TA) is pressed, it passes to the FM1 band on
the last station selected.TA function (traffic information)
Certain stations in the FM band (FM1, FM2 and FMT)
are enabled to also broadcast information about traffic
conditions. In this case the display shows “TP”.
To turn the TA (traffic information) function on/off,
briefly press button 14 (AF-TA).
The listening conditions and information given on the
display may be the following:
❒TA and TP: if tuned to a station that sends traffic
information and the traffic information function is
on;
❒TP: if tuned to a station that sends traffic
information but the traffic information function is
off;
❒TA (*): the traffic information function is on but the
radio is tuned to a station that does not give traffic
information;
❒TA and TP not shown on the display: the radio is
tuned to a station that does not give traffic
information and the traffic information function is
off.
(*) If the TA function (traffic information) is on, but the radio sta-
tion chosen does not give traffic information, the device “beeps”
every 30 seconds.
051-098 ING 21-06-2007 15:49 Pagina 76

82
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
Scrolling transmissions
It is possible to receive different programmes in the
same network and scroll them (in FM band only).
To activate this function keep button 14 (AF-TA)
pressed to activate the AF function. The scrolling may
begin pressing button 5 (
÷) or (˜).
All stations previously received (at least once) will be
stored with the corresponding PI code. With this
function on, radio stations can be tuned
forward/backward by pressing button 5 (
÷) or
(
˜).
IMPORTANT The station must have been received
previously at least once.
Stereophonic stations
If the signal received is weak, the device switches
automatically from Stereo to Mono.MENU
Functions of button 11 (MENU-PRESET SCAN)
To activate the menu function, briefly press button 11
(MENU-PRESET SCAN). The display shows the word
“MENU”.
To scroll the menu functions use buttons 6 (
N) or
(
O). To turn on/off the function selected, use buttons
5 (
÷) or (˜).
The display will show the current status of the
function selected.
The functions controlled by the menu are the
following:
❒USER EQ SETTING (equalizer setting, only if the
equalizer is on);
❒PRESET/USER/CLASSIC/ROCK/JAZZ (turning
on/off and choosing predefined equalizer
adjustments);
❒REGIONAL MODE (regional programmes);
❒CD DISPLAY (CD data display);
❒CDC DISPLAY (CD Changer data display, if
installed);
❒SENSITIVITY (tuning sensitivity);
051-098 ING 21-06-2007 15:49 Pagina 82

84
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
REGIONAL MODE function
(regional broadcast reception)
Certain national broadcasters, at determinate times of
the day, transmit regional programmes which differ
from region to region. This function makes it possible
to tune in only on local stations (regional). However if
a regional programme is heard and you wish to stay
tuned to it, the function must be activated.
To turn the function on/off use button 5 (
÷) or
(
˜).
The display will show the current status of the
function:
❒“REGIONAL MODE: ON”: function on;
❒“REGIONAL MODE: OFF”: function off.
If the function is off and a regional programme is tuned
that works in a determinate area and the car enters a
different area, the regional station of the new area is
received.
IMPORTANT When the function is off (“REGIONAL
MODE-OFF”) and the AF function is on (alternative
frequencies) the radio automatically tunes to the
frequency of the station selected with the strongest
signal.CD DISPLAY function
(Compact Disc data display)
With this function it is possible to choose the
information shown on the display, when listening to a
Compact Disc.
After choosing “CD” in the menu using buttons 6 (
N)
or (
O), the display shows “CD DISPLAY”. To change
the setting use buttons 5 (
÷) or (˜).
The display shows the setting among the two possible:
❒“TIME” (time elapsed from start of track);
❒“NAME” (CD name).
CDC DISPLAY function
(CD Changer data display)
(if installed)
This function can be chosen only if a CD Changer is
connected. In this case the display will show “CDC
DISPLAY”.
To change the function use buttons 5 (
÷) or (˜).
The display shows the setting among the three
possible:
❒“TIME” (time elapsed from start of track);
❒“CD NR” (CD number);
❒“NAME” (CD name).
051-098 ING 21-06-2007 15:49 Pagina 84

85
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
SENSITIVITY function
(tuner sensitivity adjustment)
With this function it is possible to change the
sensitivity of automatic station searching. When low
sensitivity “SENSITIVITY LOCAL” is set only stations
with excellent reception are sought; when high
sensitivity “SENSITIVITY DISTANCE” is set all stations
are sought. Therefore, if the car is in an area with a
considerable number of stations and you want to
choose only those with a strong signal, set to low
sensitivity “SENSITIVITY LOCAL”.
To set the sensitivity, use button 5 (
÷) or (˜).
The display will show the current status of the
function:
❒“SENSITIVITY: LOCAL”: low sensitivity;
❒“SENSITIVITY: DISTANCE”: high sensitivity.SVC SETTING function
(volume changing with speed)
The SVC function makes it possible to automatically
adapt the volume level to the speed of the car,
increasing it as the speed increases to maintain the
ratio with the noise level in the passenger
compartment.
To turn the function on/off use button 5 (
÷) or
(
˜). The display will show the current status of the
function:
❒“SVC SETTING: ON”: function on;
❒“SVC SETTING: OFF”: function off.
CD NAMING function
(allocating a name to a CD)
Use the CD NAMING function to give a name (max.
name length = 8 characters) to max. 30 CDs.
This function can be selected only if in Compact Disc
or CD Changer mode. To turn this function on, use
button 5 (
÷) or (˜): the display shows “CD
NAMING FUNCTION”. If the CD already has a name,
this will be shown on the display, if not, eight dashes
will be shown. If storage is no longer available for a
new name, the display will show the first name stored.
051-098 ING 21-06-2007 15:49 Pagina 85

86
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
To change the name or give a name to the new CD
press button 5 (
÷) or (˜). Press the buttons
again to choose the position of the character to be
changed. Press buttons 6 (
N) or (O) to choose or
change the character.
To store the name, press button 11 (MENU-PRESET
SCAN) again. The display will show “CD NAMING”.
To clear a name, turn the function on and press
button 15 (2-CLR) for about 5 seconds. The system
beeps and the display shows “ONE NAME DELETED”
for about 2 seconds. At this point the procedure can
be started to give a new name.
To clear all the names, turn the function on and keep
button 15
(2-CLR) pressed for over 8 seconds. The set gives two
beeps and the display shows “ALL NAMES DELETED”
for about 2 seconds. At this point it is possible to start
the name allocation procedure.PHONE SETTING function
(telephone volume adjustment)
With this function it is possible to adjust (setting from
1 to 66) or cut off (OFF setting) the telephone sound.
To turn the function on/off use button 5 (
÷) or
(
˜).
To adjust, turn the button/knob 18 (VOLUME
ON/OFF).
The display will show the current status of the
function:
❒“PHONE FUNCTION”: function on;
❒“PHONE VOLUME: 23”: function on with volume
setting 23;
❒“OFF”: function off.
HICUT function (treble reduction)
Using this function it is possible to reduce the treble
tones, in accordance with the signal transmitted. To
turn the function on/off use button 5 (
÷) or (˜).
The display will show the current status of the
function:
❒“HICUT FUNCTION: ON”: function on;
❒“HICUT FUNCTION: OFF”: function off.
051-098 ING 21-06-2007 15:49 Pagina 86

113
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
The display shows a graph with 7 bars, where each bar
represents a frequency for the left or right channel.
Choose the bar to be adjusted using button 5 (
÷)
or (
˜); the bar chosen starts to flash and it is
possible to adjust it using button 6 (
N) or (O).
To store the new settings, press button 11 (MENU-
PRESET SCAN) again. The display still shows “USER
EQ SETTINGS”.
REGIONAL MODE function
(regional broadcast reception)
Certain national broadcasters, at determinate times of
the day, transmit regional programmes which differ
from region to region. This function makes it possible
to tune in only on local stations (regional). However if
a regional programme is heard and you wish to stay
tuned to it, the function must be activated.
To turn the function on/off use button 5 (
÷) or
(
˜).
The display will show the current status of the func-
tion:
❒“REGIONAL MODE: ON”: function on;
❒“REGIONAL MODE: OFF”: function off.If the function is off and a regional programme is tuned
that works in a determinate area and the car enters a
different area, the regional station of the new area is
received.
IMPORTANT When the function is off (“REGIONAL
MODE-OFF”) and the AF function is on (alternative
frequencies) the radio automatically tunes to the
frequency of the station selected with the strongest
signal.
CD DISPLAY function
(CD data display)
With this function it is possible to choose the infor-
mation shown on the display, when listening to a
Compact Disc.
After choosing “CD” in the menu using buttons 6 (
N)
or (
O) the display shows “CD DISPLAY”. To change
the setting use buttons 5 (
÷) or (˜).
The display shows the setting among the two possible:
❒“TIME” (time elapsed from start of track);
❒“NAME” (CD name).
099-120 ING 21-06-2007 15:51 Pagina 113

116
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
PHONE function
(telephone volume adjustment)
With this function it is possible to adjust (setting from
1 to 66) or cut off (OFF setting) the telephone sound.
To turn the function on/off use button 5 (
÷) or
(
˜).
To adjust, turn the button/knob 18 (VOLUME
ON/OFF).
The display will show the current status of the func-
tion:
❒“PHONE FUNCTION”: function on;
❒“PHONE VOLUME: 23”: function on with volume
setting 23;
❒“OFF”: function off.
HICUT function (treble reduction)
Using this function it is possible to reduce the treble
tones, in accordance with the signal transmitted.
To turn the function on/off, use button 5 (
÷) or
(
˜).
The display will show the current status of the func-
tion:
❒“HICUT FUNCTION: ON”: function on;
❒“HICUT FUNCTION: OFF”: function off.IGNITION TIMER function
(system power off mode)
This function enables to switch the sound system off
according to two different modes. To turn the func-
tion on/off use button 5 (
÷) or (˜).
The display will show the selected mode:
❒“00 MIN”: deactivation dependent on ignition key.
The sound system will turn off automatically as
soon as the ignition key is turned to STOP;
❒“20 MIN”: deactivation independent of ignition key.
The sound system will stay on for max. 20 minutes
after turning the ignition key to STOP.
IMPORTANT Should the sound system turn off auto-
matically after turning the ignition key to STOP (for
both immediate or 20-minute delayed deactivation), it
will turn on automatically when turning the ignition
key to MAR. When the sound system is turned off
using the relevant knob/button 18 (VOLUME
ON/OFF), it will stay off even when turning the key to
MAR.
099-120 ING 21-06-2007 15:51 Pagina 116