change time FIAT PANDA 2007 169 / 2.G Radio CD Tape Manual

COMPACT DISC SECTION
(when the CD Changer is fitted)
❒Disc select (disc no.);
❒Track select (forward/backward);
❒Fast forward/backward;
❒Mix function (random playing of tracks);
❒Repeat function (repetition of last track);
❒Scan function (scanning the tracks on the Compact
Disc).
AUDIO SECTION
❒Mute/Pause function;
❒Loudness function;
❒Separate bass/treble adjustment;
❒Right/left channel balancing.ANTITHEFT PROTECTION
The radio is fitted with an antitheft protection system
based on a secret code. This code is stored by the
sound system and shall be entered again each time the
sound system power is disconnected (e.g.: battery
disconnection).
The message “CODE” will appear on the display
during the code entry procedure. The sound system
will only start working once the correct code is
entered.
The protection system makes the sound system
useless if it is removed from the dashboard.
IMPORTANT The secret code shall be used in the
event of next installation of the sound system on
another car, different from the original one.
13
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
To install a Lineaccessori CD changer and the respective connections, contact only a Fiat
Dealership.
On multimedia CDs in addition to sound tracks also data tracks are recorded.
Playing one of these CDs may cause rustling and such a volume as to compromise road safety, as
well as causing damage to the final stages and speakers.
001-050 ING 21-06-2007 15:48 Pagina 13

GLOSSARY
AF (Alternative Frequency)
Function that allows the radio to stay tuned on the FM
station selected also passing through areas served by
transmitters with different frequencies.
The RDS system actually keeps the intensity and
quality of the signal received under control,
automatically switching tuning on the frequency of the
transmitter that is sending the strongest signal.
Autoreverse
Function that makes it possible to listen to both sides
of the tape without having to turn the cassette over.
AutoSTore
Function with which it is possible to store
automatically radio stations with the strongest signal.
Balance (Channel balancing)
Function with which it is possible to suitably adjust the
sound from the right or left speakers.
Bass (Bass tones)
This function adjusts the bass tones.Blank Skip
Function that activates tape fast forward in the lack of
a signal. This way the waiting times between one piece
of music and another and at the end of the tape are
reduced.
CLR (Clear)
Function with which it is possible to clear one or all
the tracks of the CD stored with the TPM function.
CD Changer (where provided)
Multiple Compact Disc player.
Distant/Local (Sens Dx/Lo)
These are two levels of reception sensitivity.
1) Distant (maximum sensitivity), which makes it
possible to tune all the stations that can be
received.
2) Local (minimum sensitivity), which makes it possible
to tune only those stations with sufficiently strong
signals, such as for example local stations.
Dolby B
Tape noise limiting device produced under licence of
“Dolby Laboratories Licensing Corporation”.
15
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
001-050 ING 21-06-2007 15:48 Pagina 15

20
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
FUNCTIONS AND ADJUSTMENTS
IGN TIME function
(system power on/off) (where provided)
The set is switched on pressing the “ON” button (21).
With the ignition key at MAR the “ON” button is
always lit to facilitate turning on the radio.
This function enables to switch the sound system off
according to two different modes. Use button 9 (
˜)
or 12 (
÷) to turn this function on/off.
The display will show the selected mode:
❒“00 MIN”: deactivation dependent on ignition key;
the sound system will turn off automatically as soon
as the ignition key is turned to STOP;
❒“20 MIN”: deactivation independent of ignition key;
the sound system will stay on for max. 20 minutes
after turning the ignition key to STOP.
IMPORTANT Should the sound system turn off
automatically after turning the ignition key to STOP
(for both immediate or 20-minute delayed
deactivation), it will turn on automatically when
turning the ignition key to MAR. When the sound
system is turned off using the relevant button 21
“ON”, it will stay off even when turning the key to
MAR.Selecting Radio/Tape/
CD Changer
Pressing briefly and repeatedly the 6 (SRC-SC) button
it is possible to select the following functions in
sequence:
❒TUNER (Radio);
❒TAPE (Cassette) (only if the tape is inserted);
❒CHANGER (CD Changer) (only if the CD Changer
is connected).
After each change of the listening source, the display
shows the function selected: TUNER, TAPE or
CHANGER for about 2.5 seconds and then starts
playing.
001-050 ING 21-06-2007 15:48 Pagina 20

RADIO (Tuner)
When the set is turned on the last function selected
before turning off is played (Radio, Tape or CD
Changer).
To select the Radio source while listening to a cassette
or Compact Disc, press briefly and repeatedly button
6 (SRC-SC) until this function is selected.
When Tuner is on, the display will show the selected
station name (RDS stations only) or frequency, the
frequency band (e.g.: FM1) and the preselection button
number (e.g.: P1 = station stored on button 1).Selecting the frequency band
If in the Radio mode, briefly and repeatedly press
button 7 (BN-AS) to select the required reception
band.
Every time the button is pressed the following bands
are selected in sequence “FM1”, “FM2”, “FMT”,“MW”
and “LW” shown by the respective wording on the
display.
The last station selected in the respective frequency
band will be tuned specially if the station is not stored
on the presetting buttons.
If selected station is stored on one of the presetting
buttons, the display will show the presetting number
for few seconds; then the display will show again the
station frequency.
The FM band is divided into sections: FM1, FM2 and
FMT. The FMT reception band is reserved to the
stations stored automatically with the AutoSTore
function.
The radio is always ready to receive stations in the
RDS mode (Radio Data System).
25
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
001-050 ING 21-06-2007 15:48 Pagina 25

The behaviour of the set during AutoSTore is as
follows:
❒at the beginning of the AutoSTore function all the
other functions are disabled;
❒pressing one of the radio function buttons, e.g.: 2
(PTY), 8 (
N), 9 (˜), 10 (O), 12 (÷), (13), (14),
(15), (16), (17), (18) the automatic storage process
is interrupted, the last station heard before
AutoSTore was turned on is tuned and the function
associated with the button pressed is run;
❒pressing button 1 (AF-TA) during AutoSTore will
interrupt it, the TA function (traffic information) will
be turned on/off and a new automatic storage
process will be started;
❒changing the listening source (Radio, Tape, CD
Changer) during automatic storage will not
interrupt the AutoSTore function.
❒activating the AutoSTore function in MW or LW
bands will automatically select the FMT band where
the function is then run.
IMPORTANT Sometimes the AutoSTore function is
unable to find 6 stations with a strong signal. In this
case, the free preset buttons will be shown on the
display, for about 2 seconds, by 4 dashes and the last
station heard will be returned.Listening to stored stations
Proceed as follows:
❒select the required frequency band (FM, MW, LW);
❒briefly press one of the six station storage buttons.
The display will show the number that corresponds to
the button.
In bands FM1, FM2 and FMT, if reception is poor and
the AF alternative frequency search function is active,
the station with the strongest signal that is
broadcasting the same programme will be sought
automatically.
AF function
(alternative frequency search)
Within the RDS system the radio can work in two
different modes:
❒“AF ON”: alternative frequency search on (the
display shows “AF”);
❒“AF OFF”: alternative frequency search off.
31
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
001-050 ING 21-06-2007 15:48 Pagina 31

With the TA function (traffic information) it is
possible:
1) to search only RDS stations that transmit in the FM
band, enabled to broadcast traffic information;
2) to receive traffic information even if the tapes
player or CD Changer is in use;
3) to receive traffic information at a predefined
minimum volume even with the radio volume off.
The operations to be carried out for each of the three
above conditions are listed below.
1) To receive stations enabled to broadcast traffic
information:
❒select band FM1, FM2 or FMT;
❒briefly press button 1 (AF-TA) so that the display
shows “TA”;
❒press tuner buttons “
˜” (9) or “÷”(12).
To store stations with TA on, carry out the storage
operations (see “Manual station storage”).2) If wishing to receive traffic information when
listening to a cassette or CD, before inserting the
cassette or starting the CD Changer, in Telephone
mode or with Mute function on, tune to a station
enabled to broadcast traffic information (TP) and
activate the TA function. If while listening to the
cassette or Compact Disc, this station broadcasts
traffic information, the tape or CD will be suspended
temporarily and resumed again automatically after the
end of the message. At the start of receiving traffic
information the display will briefly show the wording
“INFO TRA”, while the display continues giving the
last information (frequency, etc.).
If the tape player is already working and at the same
time you want to receive traffic information, briefly
pressing button 1 (AF-TA) the radio tunes to the last
station heard in the FM band, the TA function is
activated and the traffic messages are transmitted. If
the station selected does not send traffic information,
the search for an enabled station starts automatically.
If wishing to interrupt the traffic information message,
briefly press button 1 (AF-TA) during transmission of
the message.
33
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
001-050 ING 21-06-2007 15:48 Pagina 33

To change the type of PTY proceed as follows:
❒press one of the 6 preset buttons;
or
❒press buttons 9 (
˜) or 12 (÷)
If the display shows the station frequency or name
instead of the type of programme, pressing 9 (
˜) or
12 (
÷) the current type of programme will be
displayed.
To store the current type of programme on one of
the 6 preset buttons, give a prolonged press on the
preset button. Storage is confirmed by a “beep”. To
seek a station with this programme see the
“Automatic tuning” and “Scanning stations (Scan
function)” paragraphs.
If no station is available with this type of programme
the system sounds a “beep”, the station selected
previously is heard and for 2 seconds the display
shows the wording “NO-PTY”.
To turn the PTY function off, briefly press button 2
(PTY) again: the display will show the last information
(frequency, etc…) active before the PTY function.Controlling the station’s type
of PTY programme
To know the type of PTY programme of the station
heard, keep button 2 (PTY) pressed until a “beep” is
heard. After the “beep” the display will show the type
of programme (see previous paragraph) offered by the
station tuned. If the station has no PTY code, the
display will show the wording “NO-PTY”. After a few
seconds the display will again show the RDS name or
frequency of the station tuned.
EON function
(Enhanced Other Network)
Certain countries have circuits which group together
several stations enabled to broadcast traffic
information. In this case the programme of the station
being heard will be interrupted temporarily to receive
traffic information (only with TA function on), ever
time these bulletins are given by one of the stations of
the same circuits.
37
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
001-050 ING 21-06-2007 15:48 Pagina 37

38
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
Scrolling transmissions
It is possible to receive different programmes in the
same network and scroll them (in FM band only).
To activate this function keep button 1 (AF-TA)
pressed to activate the AF function. The scrolling may
begin pressing button 9 (
˜) or 12 (÷).
IMPORTANT The station must have been received
previously at least once.
Stereophonic stations
If the signal received is weak, the device switches
automatically from Stereo to Mono.MENU
Functions of button 11 (MENU-PS)
To activate the menu function, briefly press button 11
(MENU-PS). The display shows the word “MENU”.
After about 2 seconds the display shows the wording
“MEN REG-ON”.
To scroll the menu functions use buttons 8 (
N) or 10
(
O). To turn on/off the function selected, use buttons
9 (
˜) or 12 (÷).
The display will show the current status of the
function selected.
The functions controlled by the menu are the
following:
❒REG (regional programmes);
❒CDC DISP (CD Changer data display, if installed);
❒SENS DX/LO (tuning sensitivity);
❒RM (Radio-Monitor);
❒PHONE (Telephone volume, if installed);
❒HICUT (Treble reduction);
❒IGN TIME (System power off mode).
To exit the menu function, press button 11 (MENU-
PS) again.
001-050 ING 21-06-2007 15:48 Pagina 38

REG function
(regional broadcast reception)
Certain national broadcasters, at determinate times of
the day, transmit regional programmes which differ
from region to region. This function makes it possible
to tune in only on local stations (regional). However if
a regional programme is heard and you wish to stay
tuned to it, the function must be activated.
To turn the function on/off, use button 9 (
˜) or 12
(
÷).
The display will show the current status of the
function:
❒“REG ON”: function on;
❒“REG OFF”: function off.
If the function is off and a regional programme is tuned
that works in a determinate area and the car enters a
different area, the regional station of the new area is
received.
IMPORTANT When the function is off (“REG-OFF”)
and the AF function is on (alternative frequencies) the
radio automatically tunes to the frequency of the
station selected with the strongest signal.CDC function
(CD Changer data display)
(if installed)
This function can be chosen only if a CD Changer is
connected.
In this case the display will show “CDC DISP”.
To change the function use buttons 9 (
˜) or 12
(
÷).
The display shows the setting among the two possible:
❒“TIME” (time elapsed from start of track);
❒“CD NR” (CD number).
SENS DX/LO function (tuner sensitivity
adjustment)
With this function it is possible to change the
sensitivity of automatic station searching. When low
sensitivity “SENS LO” is set only stations with
excellent reception are sought; when high sensitivity
“SENS-DX” is set all stations are sought. Therefore, if
the car is in an area with a considerable number of
stations and you want to choose only those with a
strong signal, set to low sensitivity “SENS LO”.
39
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
001-050 ING 21-06-2007 15:48 Pagina 39

IGN TIME function (system power off)
(where provided)
This function enables to switch the sound system off
according to two different modes. To turn the
function on/off use button 9 (
˜) or 12 (÷).
The display will show the selected mode:
❒“00 MIN”: deactivation dependent on ignition key;
the sound system will turn off automatically as soon
as the ignition key is turned to STOP;
❒“20 MIN”: deactivation independent of ignition key;
the sound system will stay on for max. 20 minutes
after turning the ignition key to STOP.
IMPORTANT: Should the sound system turn off
automatically after turning the ignition key to STOP
(for both immediate or 20-minute delayed
deactivation), it will turn on automatically when
turning the ignition key to MAR. When the sound
system is turned off using the relevant button 21
(ON/OFF), it will stay off even when turning the key
to MAR.TAPES PLAYER (TAPE)
Activating the tape player
To turn the tape player on, even when the set is off,
insert the cassette in the slot (4) with the tape
rightwards.
If the cassette is already in, press button 6
(SRC-SC) to select the tape function. Playing will start
automatically.
Playing a cassette
After turning on the tape player, the tape begins playing
automatically and the display shows either “SIDE A” or
“SIDE B” depending on which side is playing. When the
cassette is inserted, the player starts playing side A of
the tape.
If the cassette is inserted, the display shows the
wording “CC-IN”, which remains on the display eve
when different operating modes are chosen (Radio or
CD Changer). The symbol goes off after ejection of
the tape.
41
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
001-050 ING 21-06-2007 15:48 Pagina 41