Egr FIAT PUNTO 1995 176 / 1.G Workshop Manual

FIAT PUNTO 1995 176 / 1.G Workshop Manual PUNTO 1995 176 / 1.G FIAT FIAT https://www.carmanualsonline.info/img/10/4691/w960_4691-0.png FIAT PUNTO 1995 176 / 1.G Workshop Manual

Page 20 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
1A»1 
Chapter
 1
 Part A: 
Routine maintenance & servicing - petrol models 
Contents 

Air
 filter renewal 18 Automatic transmission filter and fluid change 2B Auxiliary dr<vebelt{s} check and renew

Page 30 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
Every 20 000 miles - petrol models ia-h 
clearance within specification. For example, if the measured valve clearance was 1.27 mm too great, a shim thicker by this amount will be required. Conversely

Page 37 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
1B»1 
Chapter
 1
 Part B: 
Routine maintenance & servicing - diesel models 
Contents 
Air filter renewal 13 Auxiliary drivebelt(s) check and renewal 16 Brake fluid renewal 2d Brake warning lamp oper

Page 51 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2A«1 
Chapter 2 Part A: 
SOHC (8-valve) petrol 
engine in-car repair procedures 
Contents 
Auxiliary drivebelts • removal and refitting See Chapter 1A Gamstaft cover - removal and refitting 6 Cams

Page 52 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2A*10 SOHC (8-valve) petrol engine in-car repair procedures 
Torque wrench settings Nm
 IM
 ft Camshaft cover 8 6 Camshaft sprocket 70 52 Cylinder head; Stage 1 30 22 Stage 2 Angle-lighten a further

Page 55 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2A*10 SOHC (8-valve) petrol engine in-car repair procedures 
I To make o camshaft sprocket holding ; tool, obtain two lengths of steel strip I about 6 mm thick by 30 mm wide or ; similar, one €00 m

Page 61 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2B»1 
Chapter 2 Part B: 
DOHC (16-valve) petrol 
engine in-car repair procedures 
Contents 
Auxiliary drlvebelts - removal and refitting See Chapter 1A Camshaft oil seal - renewal 6 Camshafts and ca

Page 66 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2B*6 DOHC (16-valve) petrol engine in-car repair procedures 
4.24a Scrow in the camshaft locking tools into the timing holes in the cylinder head extension 
locking tools Into the timing holes in the

Page 67 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2B*7 DOHC (16-valve) petrol engine in-car repair procedures 
35 Slacken the tensioner pulley retaining nut and reposition the tensioner to align the 
mobile
 indicator with the fixed reference mark

Page 73 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2C«1 
Chapter 2 PartC: 
Diesel engine in-car repair procedures 
Contents 
Auxiliary drivebelts - removal and refitting See Chapter 1B Camshaft cover - removal and refitting 6 Camshaft oil seal - ren
Page:   1-10 11-20 21-30 31-40 41-50 ... 60 next >