wheel torque FIAT PUNTO 1995 176 / 1.G Workshop Manual

FIAT PUNTO 1995 176 / 1.G Workshop Manual PUNTO 1995 176 / 1.G FIAT FIAT https://www.carmanualsonline.info/img/10/4691/w960_4691-0.png FIAT PUNTO 1995 176 / 1.G Workshop Manual

Page 6 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
Safety first! 0.5 
Working on your ear can be dangerous. This page shows just some of the potential risks and hazards, with the aim of creating a safety-conscious attitude. 
General hazards 
Scalding

Page 9 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual o«8
 Roadside repairs 
Wheel changing 
Some of the details shown horo will vary according to model. For Instance, the location of the spare wheel and jack is not the same on all cars. However, the ba

Page 21 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
ia.2 Servicing specifications - petrol models 
Lubricants and fluids Refer to end ot Weekly checks on page 0*17 
Capacities Engine oil (including filter) 1108 cc engine 3.47 litres 1242 cc (8-valvB)

Page 38 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 1B.2
 Servicing specifications - diesel models 
Lubricants and fluids Refer to end of Weekly checks on page 0*17 
Capacities Engine oil (including filter) Non-turbo diesei engine 4.95 litres Turbo die

Page 52 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2A*10 SOHC (8-valve) petrol engine in-car repair procedures 
Torque wrench settings Nm
 IM
 ft Camshaft cover 8 6 Camshaft sprocket 70 52 Cylinder head; Stage 1 30 22 Stage 2 Angle-lighten a further

Page 55 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2A*10 SOHC (8-valve) petrol engine in-car repair procedures 
I To make o camshaft sprocket holding ; tool, obtain two lengths of steel strip I about 6 mm thick by 30 mm wide or ; similar, one €00 m

Page 56 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2A*10 SOHC (8-valve) petrol engine in-car repair procedures 
6.3 Camshaft cover gasket 
not attempt to lover it ofl • instead free >t by working around the cover and lapping it lightly with a soft-

Page 57 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2A*10 SOHC (8-valve) petrol engine in-car repair procedures 
Preparation for refitting 16 The mating faces of the cylinder head and cylinder block must be perfectly clean before 
refitting
 the head.

Page 58 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2A*10 SOHC (8-valve) petrol engine in-car repair procedures 
10.10 Tighten the flywheel bolt to the specified torque However, it may be possible lo have it surface*ground; seek (he advice of a Rat de

Page 59 of 225

FIAT PUNTO 1995 176 / 1.G Workshop Manual 
2A*10 SOHC (8-valve) petrol engine in-car repair procedures 
require cutting with a sharp Knife to release 
the sump.
 Clean away all old gasket material. Refitting 
5
 Wwn refitting, a bead of RTV s
Page:   1-10 11-20 21-30 31-40 41-50 ... 50 next >