technical specifications FIAT PUNTO 2014 Owner handbook (in English)

194SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
2.2 2.1
2.2 2.2
2.2 2.0
2.2 2.2
2.2 2.1
2.2 2.2
2.2 2.0
2.2 2.22.4 2.1
2.5 2.2
2.3 2.1
2.3 2.3
COLD TYRE INFLATION PRESSURE (bar)Versions 1.2 1.4 1.3 Multijet
Front Rear Front Rear Front Rear
175/
65 R15 84T
Medium load Full load
185/65 R15 88T
Medium load Full loadAdd +0.3 bar to the prescribed pressure when the tyres are warm. However, recheck that the value is correct with the tyre cold.
With snow tyres, add +0.2 bar to the pressure recommended for standard tyres.
When running at speeds higher than 160 km/h, inflate tyres to full-load pressures.175/65 R15 84T (M+S)
185/65 R15 88T (M+S)
185/65 R15 88T (M+S) 175/65 R15 84T
185/65 R15 88T
185/65 R15 88T6J X 15'' - ET 43175/65 R15 84T
185/65 R15 88T 6J X 15'' - ET 43
6J X 15'' - ET 43 (▲)
6J X 15'' - ET 43 (▲)Version Rims (*) Tyres Spare wheel (
ç)
provided snow Rim (*) Tyre
1.2 - 1.4 1.3 Multijet 75HP
1.3 Multijet 85HP
(▲) OPT Alloy rim
(*) 100 mm wheel stud distance and M12 x 1.5 studs; use only wheels specified for this car.
(ç) Depending on the configuration, the spare wheel has a 175/65 R15 84T tyre and a 6J×15''- ET43 rim. In this case the
175/65 R15 84T tyre has the same specifications as the spare wheel: the information in “Changing a tyre” therefore refers to
the 175/65 R15 84T tyre.
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 194

195
SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
PERFORMANCESMaximum speeds after initial car use, in km/h.
1.2 (Euro 4) 1.2 (Euro 5 - Euro 6) 1.4 1.3 Multijet 75HP 1.3 Multijet 85HP
155 156 165 165 172
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 195

196SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
DIMENSIONSDimensions are expressed in mm and re-
fer to the vehicle fitted with its original
tyres.
Height is measured with the vehicle un-
laden.
Boot capacity
Capacity with vehicle unladen
(VDA standards): ........................ 275 dm
3
Capacity with rear seat and
backrest folded over: .................1030 dm
3
F0M604m
fig. 6Version A B C D E F G H3 - 5 doors
1.2 - 1.4 1.3 Multijet4065 890 2510 665 1490 1473 1687 1466
IMPORTANT Measurements may vary according to rim/tyre size.
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 196

5 doors
5 seats1030
560
850
850
1590
900
400
50
60
3 doors
5 seats1025
560
850
850
1585
1000
400
50
60
5 doors
5 seats1040
560
850
850
1600
1000
400
50
60
197
SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
WEIGHTS
1.2 1.4
Weights (kg)
Unladen weight (with all fluids,
fuel tank filled to 90% and without optional equipment):Payload (*) including the driver:
Maximum permitted loads (**)
– front axle:
– rear axle:– total:
Towable loads:
– braked trailer:– non-braked trailer:Maximum load on roof:
Maximum load on the ball joint (braked trailer):(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload with
respect to the maximum permitted load.
(**) Loads that must not be exceeded. The driver is responsible for arranging the goods in the boot and/or on the load carrying platform
within the maximum permitted loads.
3 doors
5 seats1015
560
850
850
1575
900
400
50
60
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 197

198SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
3 doors
5 seats1090
560
950
850
1650
1000
400
50
60
5 doors
5 seats1105
560
950
850
1665
1000
400
50
60
3 doors
5 seats1130
560
950
850
1690
1000
400
50
60
5 doors
5 seats1145
560
950
850
1705
1000
400
50
60
1.3 Multijet 75HP 1.3 Multijet 85HP
Weights (kg)
Unladen weight (with all fluids,
fuel tank filled to 90% and without optional equipment):Payload (*) including the driver:
Maximum permitted loads (**)
– front axle:
– rear axle:– total:
Towable loads:
– braked trailer:– non-braked trailer:Maximum load on roof:
Maximum load on the ball joint (braked trailer):(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload with
respect to the maximum permitted load.
(**) Loads that must not be exceeded. The driver is responsible for arranging the goods in the boot and/or on the load carrying platform
within the maximum permitted loads.
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 198

1.3 Multijet
85HP
–
–
45
5 ÷ 7
6.7
–
–
3.0
3.2
1.7 (
■)
0.5
2.2
4.5 1.4
45
5 ÷ 7
–
–
5.3
2.4
2.6
–
–
1.5 (
●)
0.5
2.2
4.5 1.2
45
5 ÷ 7
–
–
5.3
2.4
2.6
–
–
1.5 (
●)
0.5
2.2
4.5
CAPACITIESFuel tank: litres
including a reserve of: litresFuel tank: litresincluding a reserve of: litres
Engine cooling system: litres
Engine sump: litresEngine sump and filter: litres
Engine sump: litresEngine sump and filter: litres
Gearbox/differential
casing: kgHydraulic brake circuit: kg
Windscreen/rear window
washer fluid reservoir: litres with headlight washers: litres(❒) For particularly harsh climate conditions, a mixture of 60% PARAFLU
UP
and 40% distilled water is recommended.
(
▲) Per condizioni climatiche particolarmente rigide, si consiglia l’utilizzo di TUTELA TRANSMISSION GEARFORCE.
(*) Euro 4
(**) Euro 5 - Euro 5+
Recommended fuels
and original lubricants
Unleaded petrol with no less
than 95 R.O.N.
(EN228 Specification)
Diesel for motor vehicles
(EN590 Specification)
50-50 mixture of water and
PARAFLU
UP
liquid (
❒)
SELENIA K P.E.
SELENIA WR P.E.
TUTELA
CAR TECHNYX(
●) (▲)
TUTELA TRANSMISSION
GEARFORCE(
■)
TUTELA TOP 4
Mixture of water and
TUTELA
PROFESSIONAL SC35
199
SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
1.3 Multijet
75HP
–
–
45
5 ÷ 7
7,4 *
6,7 **
–
–
3.0
3.2
1.7 (
●)
0.5
2.2
4.5
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 199

200SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
FLUIDS AND LUBRICANTSYour car is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the
Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission specifications.
Lubricant quality is crucial for engine operation and duration.
SPECIFICATIONS AND RECOMMENDED PRODUCTS
Use Quality specifications of fluids and lubricants Original Replacement
for correct car operation fluids and lubricants interval
Lubricants for
petrol engines
Lubricants for
diesel enginesIn case of emergency, if lubricants with the prescribed specifications are not available, products with the minimum indicated ACEA
performance can be used for topping up; in this case optimal performance of the engine is not guaranteed.SAE 5W-40 ACEA C3
grade synthetic base lubricant.
FIAT 9.55535-S2 certification.
SAE 5W-30
grade synthetic base lubricant.
FIAT 9.55535-S1 certification.SELENIA K P.E.
Contractual Technical
Reference
N° F603.C07
SELENIA WR P.E.
Contractual Technical
Reference
N° F510.D07As per
the Scheduled
Servicing Plan
As per
the Scheduled
Servicing Plan
The use of products with specifications other than those indicated above could cause damage
to the engine not covered by the warranty.
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 200

201
SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
Brake liquid
Fuel additiveUse Quality specifications of fluids and lubricants Original Applications
for correct car operation fluids and lubricants
(*) IMPORTANT Do not use fluids with different specifications for topping up or mixing.
(❒) When the vehicle is used in particularly harsh climate conditions, we recommend using a 60-40 mixture of PARAFLU
UP
and distalled water. Windscreen/rear
window washer
fluidMechanical gearbox and
differential (petrol and
1.3 Multijet 75HP versions)
Mechanical gearbox and
differential (1.3 Multijet
85HP versions)
Wheel side
constant-velocity joints
Differential side
constant-velocity joints
Hydraulic brakes
and hydraulic clutch con-
trols
Cooling circuit.
Mixture: 50% water and
50% PARAFLU
UP
(❒)
Mix 25cc per 10 litres of
diesel
To be used diluted or
undiluted in windscreen/
rear window washer/
wiper systems TUTELA CAR TECHNYX
Contractual Technical
Reference N° F010.B05
TUTELA TRANSMISSION
GEARFORCE
Contractual Technical
Reference N° F702.G07
TUTELA ALL STAR
Contractual Technical
Reference N° F702.G07
TUTELA STAR 700
Contractual Technical
Reference N° F701.C07
TUTELA TOP 4
Contractual Technical
Reference N° F001.A93
PARAFLU
UP
(*)
Contractual Technical
Reference N° F101.M01
TUTELA DIESEL ART
Contractual Technical
Reference N° F601.L06
TUTELA
PROFESSIONAL SC35
Contractual Technical
Reference N° F201.D02 Lubricants
and greases
for drive
transmission
system
Radiator
protection SAE 75W-85 grade synthetic base lubricant.
FIAT 9.55550-MX3 certification
SAE 75W grade synthetic base lubricant.
FIAT 9.55550-MZ6 certification
Molybdenum disulphide grease, for use at
high temperatures.
FIAT 9.55580 certification. NL.GI. 1-2 consistency
Grease for constant-velocity joints with low
friction coefficient.
FIAT 9.55580 certification. NL.GI. 0-2 consistency
Synthetic fluid FMVSS n° 116 DOT 4, ISO 4925
SAE J1704, CUNA NC 956- 01.
FIAT 9.55597 certification
Inhibited mono ethylene glycol-based antifreeze
protection, red, with organic formulation.
Passes CUNA NC 956-16, ASTM D 3306 specifications.
FIAT 9.55523 certification
Additive for diesel antifreeze, protecting
diesel engines
Mixture of alcohol, water and surfactants
CUNA NC 956-II
FIAT 9.55522 certification.
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 201

202SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
❒
extra-urban cycle: driving that simulates
using the vehicle out of town with fre-
quent acceleration in all gears; the
speed varies from 0 to 120 km/h;
❒
combined consumption: this is calcu-
lated with a weighting of about 37% ur-
ban cycle consumption and about 63%
extra-urban consumption. The fuel consumption figures given in the
table below are determined on the basis
of the homologation tests set down by
specific European Directives.
The procedures below are followed for
measuring consumption:
❒
urban cycle: cold starting followed by
driving that simulates urban use of the
car;IMPORTANT The type of route, traffic
situations, weather conditions, driving
style, general state of the car, trim lev-
el/equipment/accessories, load, climate
control system, roof rack, and other sit-
uations that affect how the car moves
through the air may lead to different fuel
consumption levels than those measured.
Fuel consumption according to the current European directive (litres / 100 km)
Versions Urban Extra-urban Combined1.2 (Euro 4)7,3 4,8 5,71.2 (Euro 5 - Euro 6)7,2 4,4 5,41.4 (Euro 4)7,5 5,0 5,91.4 (Euro 5 - Euro6)7,4 4,7 5,71.3 Multijet 75HP (Euro 4)6,2 3,5 4,51.3 Multijet 75HP (Euro 5 - Euro5+)5,5 3,5 4,21.3 Multijet 85HP (Euro 5+)4,4 2,9 3,5FUEL CONSUMPTION
185-208 PUNTO POP 1ed EN 24/09/13 14.27 Pagina 202

203
SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
CO
2
EMISSIONS
The CO
2emission figures in the table below refer to combined fuel consumption.
Versions CO
2Emissions
according to the current European directive (g/km)
1.2 (Euro 4)1351.2 (Euro 5 - Euro6)1261.4 (Euro 4)1391.4 (Euro 5 - Euro 6)1321.3 Multijet 75HP (Euro 4)1191.3 Multijet 75HP (Euro 5 - Euro 5+)1121.3 Multijet 85HP (Euro 5+)90
185-208 PUNTO POP 1ed EN 24/09/13 14.27 Pagina 203