engine FIAT QUBO 2010 1.G Repair Manual

units and the relay/fuse box on the left side of the
engine compartment (as you look from behind
the wheel). Have this operation performed at a
specialist garage.
IMPORTANT The washing should take place with the
engine cold and the ignition key in the STOP
position. After the wash, make sure that the various
protective devices (e.g. rubber caps and guards)
have not been removed or damaged.
Front headlights
IMPORTANT Never use aromatic substances (e.g.
petrol) or ketenes (e.g. acetone) for cleaning the
plastic lenses of the front headlights.INTERIORS
Check regularly that water is not trapped under the
mats (from dripping off shoes, umbrellas, etc.) which
could cause the metal to rust.
WARNING
Never use flammable products, such as
pet
roleum ether or modified petrol,
to clean the inside of the vehicle.The
electrostatic charges which are generated by
rubbing during the cleaning operation may
cause a fire.
WARNING
Do not keep aerosol cans in the vehicle:
t
hese could explode. Aerosol cans must
not be exposed to temperatures of more than
50°C.When the vehicle is exposed to sunlight ,
the temperature inside can greatly exceed
this value.
SEATS AND FABRIC PARTS
Remove dust with a soft brush or a vacuum cleaner.
It is advisable to use a damp brush on velvet
upholstery.
Rub the seats with a sponge and a solution of water
and mild soap.
186
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX

TECHNICAL SPECIFICATIONS
IDENTIFICATION DATA
We recommend taking note of the identification
codes. The identification data are printed on labels in
the following positions fig. 176:
❒VIN plate.
❒Chassis marking.
❒Bodywork paint identification plate.
❒Engine marking.
VIN PLATE
This is applied on the rear part of the vehicle and
contains the following data fig. 177:
BType-approval number
CVehicle type identification code
DChassis number
EMaximum authorised weight of vehicle fully laden
FMaximum permitted weight of vehicle fully laden
plus trailer
GMaximum permitted weight on first (front) axle
HMaximum permitted weight on second (rear) axle
IEngine type
LBodywork version code
MNumber for spare parts
NCorrect value of smoke coefficient (for diesel
engines)
fig. 176F0T0175fig. 177F0T0011
188
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX

CHASSIS MARKING
This is printed on the passenger compartment floor,
near the right front seat.
Slide the hatch A fig. 178 forward to access.
The marking includes:
❒type of vehicle;
❒chassis manufacture number.BODY PAINTWORK IDENTIFICATION
PLATE
This plate is applied inside the bonnet and shows the
following data fig. 179:
APaint manufacturer.
BColour name.
CFiat colour code.
DRespray and touch up code.
ENGINE MARKING
This is printed onto the cylinder block and shows the
type and production serial number.
fig. 178F0T0084fig. 179F0T0012
189
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX

ENGINE CODES - BODYWORK
VERSIONS
Version Engine code
1.3 Multijet199A2000
The following body version code and key are an
example that may be applied to all body version
codes.
Example:
225BXB1AAX
Key :
225Model
BBody
XBEngine
1Traction
ATransmission
AXVersionBODY
AQubo M1 (5 seat)
CQubo N1 (4 seats)
ENGINES
XA1.4 petrol Euro 4
XB1.3 Multijet 75 HP Euro 4
XCMethane
XD1.3 Multijet 75 HP Euro 5
XE1.3 Multijet 95 HP Euro 5
XF1.4 petrol Euro 5
DRIVE
1Front
TRANSMISSION
AMechanical gearbox
1Comfort/Dualogic gearbox
190
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX

ENGINE
General features 1.3 Multijet 75 HP
Type code 199A2000
Cycle Diesel
Number and arrangement of cylinders straight 4
Piston diameter and travel (mm) 69.6 x 82
Total displacement (cm3) 1248
Compression ratio 17.6
Max. power (EEC) (kW) 55
Max. power (EEC) (HP) 75
Corresponding engine speed (rpm) 4000
Max. torque (EEC) (Nm) 190
Max. torque (EEC) (kgm) 19.4
Corresponding engine speed (rpm) 1750
Spark plugs -
Fuel Diesel for automotive engines (Specification EN590)
191
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX

CAPACITIES
1.3 Multijet 75 HP
Recommended fuels
and original lubricants
litres kg
Fuel tank: 45 -Diesel for automotive
engines (Specification
EN590) including a reserve of: 6/7 -
Engine cooling system: 7.6 -50% mixture of distilled
water andPARAFLU
UP
(*)
Engine sump: 3.0 2.6
SELENIA WR P.E.
Engine sump and filter: 3.2 2.8
Gearbox/differential casing: 1.84 1.6TUTELA CAR
TECHNYX
Hydraulic power steering 0.38 0.35TUTELA GI/E
Hydraulic brake circuit: - 0.5TUTELA TOP 4
Windscreen and rear window
washer fluid tank:3.0 -Water and liquid mixture
TUTELA
PROFESSIONAL SC
35
(*)When the vehicle is used in particularly harsh weather conditions, we recommend using a 60-40 mixture of PARAFLUUPand
distilled water.
204
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX

FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND SPECIFICATIONS
UseFluid and lubricant specifications for
correct operationGenuine fluids and
lubricantsChange interval
Diesel engine
lubricantsSAE 5W-30 grade synthetic base lubricants.
QualificationFIAT 9.55535-S1.SELENIA WR P.E.
Contractual Technical
Reference N. F510.D07According to Sched-
uled Servicing Plan
For diesel engines, in the event of an emergency in which the original products are not available, lubricants
with at least ACEA C2 performance are acceptable; however, in this case optimum engine performance is not
guaranteed and the lubricants should be replaced with recommended products as soon as possible at a Fiat
Dealership.
The use of products with features lower than ACEA C2 could cause engine damage not covered by warranty.
In particularly harsh climatic conditions, ask the Fiat Dealer Network for advice on the appropriate
PETRONAS LUBRICANTS product.
205
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX

UseFluid and lubricant specifications for
correct operationGenuine fluids and
lubricantsApplications
Protective agent
for radiatorsRed protective with antifreeze action, based on
inhibited monoethyl glycol with organic formula.
Exceeding CUNA NC 956-16, ASTM D 3306
specifications.
Qualification FIAT 9.55523.PARAFLU
UP(*)
Contractual Technical
Reference N. F101.M01Mixture: 50% water
and 50%PAR-
AFLUUP(**)
Fuel additiveAdditive for diesel antifreeze, protecting diesel
enginesTUTELA DIESEL
ART
Contractual Technical
Reference N. F601.L06To be mixed with fuel
oil (25 cc per 10
litres)
Windscreen/rear
window washer
fluidMixture of alcohol, water and surfactants CUNA
NO 956-II
Qualification FIAT 9.55522.TUTELA PROFES-
SIONAL SC 35
Contractual Technical
Reference N. F201.D02To be used diluted or
undiluted in
windscreen/rear win-
dow washer/wiper
systems
(*)IMPORTANT Do not use fluids with different specifications for topping up or mixing.
(**)In particularly harsh weather conditions, we recommend using a 60-40 mixture ofPARAFLUUPand distilled water.
207
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX

ARRANGEMENTS FOR DEALING WITH THE VEHICLE AT THE END OF ITS
LIFE
Fiat has been committed for many years to safeguarding the environment through the constant improvement
of its production processes and manufacturing products that are increasingly "eco-compatible". To give
customers the best possible service in terms of respecting environmental laws and in response to European
Directive 2000/53/EC governing vehicles at the end of their life, Fiat is offering its customers the opportunity
of handing over their vehicle* at the end of its life without incurring any additional costs.
The European Directive sets out that when the vehicle is handed over the last keeper or owner should not
incur any expenses as a result of it having a zero or negative market value. In all European Union countries,
until 1st January 2007, only vehicles registered after 1st July 2002 were collected free of charge, while since
2007 collection has been free of charge irrespective of the year of registration as long as the vehicle contains
its basic components (in particular, the engine and bodywork) and has no additional waste.
To hand your vehicle over at the end of its life without extra cost, go to one of our Dealerships or
Fiat-authorised collection and scrapping centres. These centres have been carefully chosen to offer high
quality service for the collection, treatment and recycling of unused vehicles with respect to the environment.
You can find further information on these collection and scrapping centres either from a Fiat or Fiat
Commercial Vehicle Dealership or by calling the freephone number 00800 3428 0000 or by going on the Fiat
website.
(*) Vehicle for transporting passengers with a maximum of nine seats and a total permitted weight of 3.5 t
211
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX

®
Always ask your mechanic for
®
In the heart of your engine.