radio FIAT SCUDO 2007 2.G Radio CD Manual

1SOUND SYSTEM
T
he fixed radio has been designed to suit the specific characteristics of the passenger compartment, with a
personalised design that matches the style of the dashboard.
T
he radio is installed in a user-friendly position for the driver and passenger and the graphics on the front
panel make location of the controls quick, facilitating use.
T
o increase security against theft, the sound system is fitted with a protection system that makes it usable
only on the vehicle where it was fitted.
B
elow you will find the instructions for use, which you are advised to read through carefully and always keep
within reach (e.g. in the glove compartment).
E
njoy your read!

2SOUND SYSTEM
C C C C
O O O O
N N N N
T T T T
E E E E
N N N N
T T T T
S S S S
ADVICE
ROAD SAFETY .................................................................... 3
RECEPTION CONDITIONS ............................................ 3
CARE AND MAINTENANCE ......................................... 3
COMPACT DISC................................................................. 4RADIO WITH CD AND MP3 CD PLAYER
(where fitted)
GENERAL INFORMATION .............................................. 7
CONTROLS ON FRONT PANEL .................................. 8
CONTROLS ON STEERING WHEEL........................... 9
FUNCTIONS AND ADJUSTMENTS ...............................10
– Switching on and off ....................................................10
– Adjusting volume and sound .................................... 10
RADIO................................................................................... 11
COMPACT DISC PLAYER................................................ 14
HANDS-FREE KIT WITH VOICE RECOGNITION
AND Bluetooth
®WIRELESS TECHNOLOGY............ 16
CD–CHANGER.................................................................... 17

3SOUND SYSTEM
ROAD SAFETY
You are advised to learn how to use the
various radio functions (e.g.: storing sta-
tions) before starting to drive.RECEPTION CONDITIONS
Reception conditions change constantly
when driving. Reception may be disturbed
by the presence of mountains, buildings or
bridges particularly when far away from
the station being listened to.
IMPORTANTWhen receiving traffic
information the volume might be higher
than normal.
A A A A
D D D D
V V V V
I I I I
C C C C
E E E E
CARE AND MAINTENANCE
The radio structure ensures long oper-
ation with no need for particular mainte-
nance. In the event of a fault, contact a
Fiat Dealership.
To clean the front panel only use a soft,
antistatic cloth. Cleaning and polishing
products might spoil the surface.
Too high a volume when dri-
ving can put the driver’s life
at risk and that of other people.
Therefore the volume should always
be adjusted in such a way that it is al-
ways possible to hear the noises of the
surrounding environment (e.g.: horns,
ambulance and police sirens, etc.).
WARNING

7SOUND SYSTEM
R R R R
A A A A
D D D D
I I I I
O O O O

W W W W
I I I I
T T T T
H H H H

C C C C
D D D D

a a a a
n n n n
d d d d

M M M M
P P P P
3 3 3 3

C C C C
D D D D

P
P P P
L L L L
A A A A
Y Y Y Y
E E E E
R R R R

( ( ( (
w w w w
h h h h
e e e e
r r r r
e e e e

f f f f
i i i i
t t t t
t t t t
e e e e
d d d d
) ) ) )
GENERAL
INFORMATIONThe set possesses the following func-
tions:
RADIO SECTION
– PLL tuning (Phase Locked Loop) with
FM/AM frequency bands.
– RDS (Radio Data System) with TA
(Traffic Announcement) - EON (Enhanced
Other Network) - REG (Regional Pro-
grammes) - PTY (Program Type) func-
tions.
– Alternative frequency search selection
in RDS mode (Radio Data System).
– Automatic/manual station tuning.
– Manual storage of 24 stations: 18 in the
FM band (6 in FM1, 6 in FM2 and 6 in
FMast), and 6 in the AM band.
– Automatic storage (AUTOSTORE
function) of 6 stations in the FM band.
– Automatic Stereo/Mono selection.COMPACT DISC SECTION
– Direct CD selection.
– Track selection (forward/backward).
– Track scan function (forward/back-
ward.
– RDM function (random track play-
back).
CD-CHANGER SECTION
(where fitted)
– Direct CD selection.
– Track selection (forward/backward).
– Track scan function (forward/back-
ward.
– RDM function (random track play-
back).AUDIO SECTION
– Separate bass/treble settings (BASS/
TREBLE).
– Right/left channel balance (BAL).
– Automatic Loudness function (LOUD).
– Front/rear sound balance (FAD).
Have the system installed and
connected by a Fiat Dealer-
ship only.
Multimedia CDs contain
sound and data tracks. Play-
ing these CDs can cause noise loud
enough to jeopardise road safety and
damage final system stages and
speakers.
WARNING

8SOUND SYSTEM
CONTROLS ON FRONT PANELfig. 1
F0B0500m
A
˚
CD eject button
BMODEButton for displaying data
on the right side of the
screen display (Radio, CD,
etc.)
CSOURCEButton for selecting the au-
dio source: Radio, CD or
CD Changer
DBANDButton for selecting FM1,
FM2, FMast, AME
Compact Disc slot
F
+Button for selecting sound
functions: balance, fader,
loudness, sound settings
GLISTButton for displaying the
list of local radio stations,
CD tracks and MP3
(where fitted) directories
HESCButton for quitting the cur-
rent function (and go back
to previous one)ITA/PTYButton for selecting TA
(Traffic Announcements)
and PTY (Program Type)
functions
L÷˜Buttons for searching au-
tomatically previous/next
radio station and selecting
previous/next CD or MP3
(where fitted) tracks
MNOButtons for tuning previ-
ous/next radio station and
selecting previous/next
CD or MP3 (where fitted)
tracks
NOKConfirmation button
OMENUButton for entering the
main menu
P1----6Buttons for storing the re-
quired radio station, se-
lecting the stored setting,
selecting a Compact Disc
in the CD Changer
QDARK1
stpress: partial display
darkening;
2ndpress: total darkening;
3rdpress: standard bright-
ness
R
ON, OFF, volume adjust-
ment

9SOUND SYSTEM
CONTROLS ON
STEERING WHEEL1. Volume up button
2. Volume down button
1+2 To switch the MUTE function on,
press buttons 1 and 2 at the same
time; to restore volume press one
of the two buttons
3. Radio: automatic tuning to upper
radio frequency
Hold the button pressed to change
frequency; station search will stop
when releasing the buttonCD/CD Changer/MP3 (where fit-
ted):select previous track
Hold the button pressed for fast
track playback; release the button
to return to standard playback
4. Radio: automatic tuning to lower
radio frequency
Hold the button pressed to change
frequency; station search will stop
when releasing the button
CD/CD Changer/MP3 (where fit-
ted):select previous track
Hold the button pressed for fast
track playback; release the button
to return to standard playback
5. Button for selecting audio source
(radio/CD/CD Changer) and for
confirming the selected functionfig. 2
F0P0501m
6. Turn up
Radio: select lower stored station
CD Changer: select previous CD
With MP3 (where fitted): select
previous directory
7. Turn down
Radio: select upper stored station
CD Changer: select next CD
With MP3 (where fitted): select
next directory

11SOUND SYSTEM
Loudness function
This function automatically enhances
bass and treble when the volume is low.
Press button Nor Oto switch the func-
tion on and off.
Front/rear sound balance
adjustment
When the display shows “FAD”, press
button Nor Oto adjust the setting.
Press button Nto enhance the sound
from the front speakers or press button
Oto enhance the sound from the rear
speakers .Right/left sound balance
adjustment
When the display shows “BAL”, press
button NorOto adjust the setting.
Press button Nto enhance the sound
from the right speakers or press button
Oto enhance the sound from the left
speakers.
Automatic volume adjustment
This function makes it possible to auto-
matically adapt the volume level to the
speed of the car. Press button Nor Oto
switch this function on and off.
RADIOListening to the radio
Press repeatedly button SOURCE(C)
and select radio.
Selecting the waveband
Press repeatedly button BAND(D) to
select FM1, FM2, FMast or AM.
Automatic station search
Briefly press either button ÷or ˜
to start the automatic search from the
next or previous station, respectively.
Keep the required key pressed to con-
tinue tuning in the chosen range.
The station search operation will stop at
the first station which can be received
when the button is released.

12
SOUND SYSTEM
When the TA function is on, only the
stations broadcasting traffic announce-
ments will be tuned to.
The station search will initially be carried
out with low sensitivity (tuning to the
most powerful stations) and then with
high sensitivity (tuning to the weakest and
most distant stations).
To run a search in “DX” sensitivity di-
rectly, press button ÷or ˜twice.
Manual station search
Briefly press either button Nor Oto
select the next or previous station, re-
spectively.
Hold the buttons pressed in the required
direction to change frequency. The search
will stop as soon as the button is released.
Manual station storage
Proceed as follows to manually store the
stations:
1)select the required station with but-
ton ÷or ˜;
2)hold one of the buttons from 1to 6
(P) pressed for over 2 seconds.Automatic FM station storage
(Autostore)
The sound system can automatically
store the six strongest FM stations in the
FMast storage waveband.
Hold button BAND(D) pressed for
longer than two seconds to store the sta-
tions.
IMPORTANTThe Autostore function
will replace the six previously stored FM
stations. If less than six stations can be re-
ceived, the memory position will not be
changed or cleared.
Tuning to stored stations
Proceed as follows to tune to a stored
station:
1)press button BAND(D) to select
the waveband FM1, FM2, FMast or AM;
2)press one of the buttons from 1to
6(P). The sound system will tune to the
corresponding station.Displaying the list of local
radio stations
Press button LIST(G) to display the list
(in alphabetical order) of the radio stations
with the strongest signal.
Select the required stations using but-
tons Nor Oand then confirm with but-
ton OK(N).
RDS FUNCTIONS
RDS function (Radio Data System)
The RDS function makes it possible to
receive a station on whatever frequency
used by the broadcasting station in the
area you are driving in.
Press briefly button RDS(
I) to switch
the function on and off. The name of the
tuned station and wording ”RDS” will ap-
pear on the display when the RDSfunc-
tion is on. The display shows “(RDS)”
when the function is active but not avail-
able yet.

13SOUND SYSTEM
RDS station search
The sound system constantly searches
for the station broadcasting the pro-
gramme with the best reception.
TA function (Traffic information)
The TAfunction is used to receive traf-
fic announcements.
The sound system will automatically
switch to the programme broadcasting the
traffic announcement and automatically re-
turn to the previous sound source once
the announcement is over.
Press button TA(L) to switch the func-
tion on and off.
When the TA function is on, the mes-
sage “TA” will appear on the display. The
display shows “(TA)” when the function
is active but not available yet.
The traffic announcements will have pri-
ority over the other sound system sources
(RADIO, CD or CD CHANGER).IMPORTANTThe traffic announce-
ment volume is separate from the normal
sound system volume. The volume can be
adjusted by means of the volume knob.
The setting will be stored and used for the
following announcements.
When receiving a traffic announcement,
the message “TRAFFIC” will alternate
on the display with the name of the sta-
tion broadcasting the announcement.
The message “NO TA” will appear on
the display if the station tuned to does not
broadcast traffic announcements.
Interrupting traffic
announcements
Press button TA/PTY(I) while listen-
ing to a traffic announcement to interrupt
it. The TA function will be switched off.REG function
(Tuning regional programmes)
When stations are grouped into a net-
work, they broadcast regional pro-
grammes that can be received in the dif-
ferent areas you are crossing.
The REG function makes it possible to
privilege a particular regional programme
although the reception area is changed.
Press button RDS(I) for longer than
two seconds to switch the function on and
off.
PTY function (Program Type)
This function can be used to receive sta-
tions broadcasting a specific type of pro-
gramme (e.g. news, cultural, sport, rock
music, etc…).
Proceed as follows to switch the PTY
function on and off:
1)press button BAND(D) to select
the waveband FM1, FM2 or FMast;
2)press button TA/PTY(I) for longer
than two seconds.

16
SOUND SYSTEM
HANDS-FREE KIT WITH VOICE RECOGNITION
AND Bluetooth
®WIRELESS TECHNOLOGY
Bluetooth
®wireless technology enables
wireless connection between your mobile
phone and the hands-free kit installed on
your vehicle.
The services offered by the Blue-
tooth
®wireless technology depend
on your mobile phone carrier, on the
SIM card and on the compatibility
between phones used; check the
available services on your mobile
phone handbook and with your mo-
bile phone carrier.To pair your mobile phone with your
hands-free kit for the first time you shall ac-
tivate the Bluetooth
®function on your
phone as described on your phone user's
guide. When the function is active, the cor-
responding icon is displayed on your phone
and the hands-free kit attempts to detect a
phone equipped with Bluetooth
®.
Select the phone corresponding to the
vehicle name, the display will then show
a configuration message.
During the pairing procedure the mes-
sage asking for the passcode will be dis-
played; enter “1234” as passcode and then
confirm it (according to mobile phone
model, the request for entering the code
could be displayed before the configura-
tion message).
Use keys ˜or ÷(L) to select
“YES” on the sound system display and
then press OK(N) to confirm. Answering a call
Incoming calls are indicated by a beep
and by the dedicated message on the mul-
tifunction display.
Use keys ˜or ÷(L) to select
“YES” on the sound system display and
then press OK(N) to confirm.
Press the end of the radio steering col-
umn stalk (5) to accept the call.
Making a call
Dial the number on the mobile phone
keypad.
Press for long the end of the radio steer-
ing column stalk (5) to display the phone-
book on the sound system display.
Due to safety reasons, the
Bluetooth
®pairing proce-
dure between your mobile phone and
the hands-free kit shall only be per-
formed with the vehicle stationary
and ignition key to M.
WARNING