service FIAT SCUDO 2009 2.G Radio CD MP3 Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2009, Model line: SCUDO, Model: FIAT SCUDO 2009 2.GPages: 26, PDF Size: 0.34 MB
Page 4 of 26
3
RADIO
ROAD SAFETY
Please, learn how to use all different
radio functions (i.e. save stations) before
beginning to drive.RECEPTION CONDITIONS
Reception conditions change constantly
while driving. Reception may be interfered
with by the presence of mountains, build-
ings or bridges, or when you are far from
the broadcaster.
WARNINGSThe volume may in-
crease to above normal levels when re-
ceiving traffic bulletins.
S S
U U
G G
G G
E E
S S
T T
I I
O O
N N
S S
CARE AND MAINTENANCE
The radio system is designed for a long
operational life and therefore does not re-
quire particular maintenance. If there is
a fault, contact a
Fiat Service net-
work.
Clean the cover with a soft antistatic
cloth only. Cleaning and polishing prod-
ucts could damage the surface.
High volume can be a risk for
driver and for other people
in road traffic. The volume must
therefore always be adjusted so that
you can still hear noise from the sur-
roundings (e.g. horns, ambulance
sirens, police sirens, etc.).
WARNING
603_97_184 SCUDO RADIO GB 1E:Radio Scudo G9 EN 1-07-2009 15:18 Pagina 3
Page 16 of 26
15
RADIO
Searching for PTY programs
Proceed as follows to search for a PTY
program:
1)Press the BAND(D) button to se-
lect the FM1, FM2, FMAST or AM fre-
quency bands, respectively.
2)Hold down the TA/PTY(I) button
for more than 2 seconds.
3)Press the buttons ÷or ˜briefly
to scroll the list of proposed programs;
4)When the desired program appears,
hold down the ÷or ˜button for
more than 2 seconds to activate the au-
tomatic search (after automatic searching,
the PTY function is deactivated).
When the PTY function is active, it is
possible to store the programs: hold down
one of pre-selection buttons from 1to 6
(P) for more than two seconds. Press the
relative button briefly to recall the stored
program type.EON function (Enhanced Other
Networks)
This function interconnects stations that
are part of the same network. The func-
tion makes it possible to receive news on
the traffic situation or a PTY programme
transmitted by a station that is part of the
same network as the tuned station.
This service is activated automatically
when the TA or PTY function is selected.CD MODE
Select CD player
Playing starts automatically when a CD
is inserted with its printed side facing
upwards.
WARNINGSome anti-pirating systems
present on the original CD or CDs copied
with non-professionals burners can cause
mulfunctioning independently of the qual-
ity of the original player.
Listening to the CD already in
the player
If you are playing another audio source
and a CD is already present in the play-
er, press the SOURCE(C) button. The
CD will start to play automatically.
CD ejection
To extract the CD press
˚(A).
Select a track of the CD.
Proceed as follows to select a CD track:
1)briefly press ˜button to select the
next track;
2)briefly press ÷to go back to the
beginning of the track that is playing; press
again to select the previous track.
603_97_184 SCUDO RADIO GB 1E:Radio Scudo G9 EN 1-07-2009 15:18 Pagina 15
Page 21 of 26
20
RADIO
iPOD®CONNECTION
(for versions/markets, where provided)
iPod
®connection
The iPod
®must be connected to the
port B-fig. 7 placed under the radio, close
to the USB port. Lift up the cover to gain
access to the port.
To prevent damage to the
radio system, do not con-
nect to iPod
®port devices
other than audio devices.
Reading lists/Select tracks
Available lists are Artist, Genre and
Playlist (as defined in the iPod
®).
Selection and Navigation are described
in previous phases, from 1 to 5.
Selection of classification and tracks lists
is as described for the USB reader.
WIP Bluetooth ®MODE - Bluetooth®TELEPHONE
Bluetooth®technology allows wireless
communication without any electrical con-
nections (wireless) between your mobile
phone and the hands-free set on the ve-
hicle.
The Bluetooth
®services offered de-
pend on your phone provider, your
SIM card and compatibility between
the devices used; check the available
services in your mobile phone user
handbook and with your service
provider.First mobile phone connection
In order to make the initial connection
between a mobile phone and the hands-
free system, the Bluetooth
®function on the
phone must be activated according to the
instructions (consult the phone instruction
manual). When the function is active, the
icon appears on the display and the tele-
phone researches for Bluetooth
®acces-
sories near the phone.
Press the MENU(O) button to activate
the Bluetooth
®function, then use the ÷
/˜buttons to select, in order:
– Bluetooth telephony - Audio
– Bluetooth configuration.
– Perform a Bluetooth search
“Search in progress..” is shown on the dis-
play followed by the list of the first 4 recog-
nised telephones.
Use the ÷/˜buttons to select the
telephone to connect to in the list and
confirm with OK(N).
WARNINGIt is possible to connect to
only one telephone at a time.
For safety reasons, the Blue-
tooth®connection procedure
between the mobile phone and the
hands-free system must be carried out
only with the vehicle parked and the
ignition key turned to M.
WARNING
603_97_184 SCUDO RADIO GB 1E:Radio Scudo G9 EN 1-07-2009 15:18 Pagina 20
Page 25 of 26
Fiat Group Automobiles S. p. A. – Customer Services – Technical Services
Service Engineering Largo Senatore G. Agnelli, 5 – 10040 Volvera – Torino (Italia)
Print no. 603.97.184 – 06/2009 – 1 Edition
603_97_184 SCUDO RADIO GB 1E:Radio Scudo G9 EN 1-07-2009 15:18 Pagina 24