buttons FIAT STILO 2005 1.G Radio Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2005, Model line: STILO, Model: FIAT STILO 2005 1.GPages: 86, PDF Size: 1.15 MB
Page 54 of 86

RADIO WITH COMPACT DISC PLAYER
53 Nero- Testo 603.46.306 Radio Stilo gb
53
Automatic tuning
Briefly press (less than 1 second)
button 15(<<) or 6(>>) to start
automatically searching the tuning
for the next station that it is possible
to receive in the direction chosen.
If the station on which the tuner
stops is one of the stations stored
with the preset buttons (from 1 to
6), the display will show the preset-
ting number.
Manual tuning
This allows manual station search-
ing in the chosen band. This function
has to be through the MENU.
For manual tuning proceed as fol-
lows:
1.Select the band by button 13
(BAND
AS): FM1, FM2, FM3, MW
or LW.
2.Press briefly (less than 1 second)
and repeatedly button 15(<<) or 6
(>>).Pressing one of the buttons 15
(<<) or 6(>>) longer (over 1 sec-
ond) obtains fast forward searching,
which is stopped when the button is
released.
If the station on which the tuner
stops is one of the stations stored
with the preset buttons (from 1 to
6), the display will show the preset-
ting number on the bottom line.
Station scanning
(Scan function)
Press button 7 (SCAN): to start
scanning the stations in the frequen-
cy band selected (FM, AM, MW,
LW). The frequency of each station
found is shown on the display.
While scanning the display will
show “TUNER SCAN”, or “CDC
SCAN” (if the CD Changer is fit-
ted), with the word “SCAN” flash-
ing.When the SCANfunction is on, all
the other functions are cancelled.
The SCANfunction is interrupted
in the following cases:
– pressing again 7(SCAN)
– turning the set off
– changing the listening source
(Radio, CD Changer)
– changing the frequency band (or
storing section) selected
– pressing a preset button
– turning AutoSTore on (automatic
storage)
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 53
Page 55 of 86

54 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH COMPACT DISC PLAYER
54
Scanning preset stations
Press the 7 (SCAN)button for at
least 2 seconds to start scanning the
preset stations in the present fre-
quency band;
– FM:FM 1, FM 2, …., FM II 1, FM
II 2,… FM III 1, FM III 2,… FMAST 1,
FMAST 2,….
– AM:MW 1, MW 2, …. MW 6,
LW 1, LW 2, …. LW 6, AMAST 1,
AMAST 2,…
Each preset station will be heard
for few seconds and its frequency
shown on the display.
The preset station SCANfunction
is interrupted in the following cases:
– pressing again 7(SCAN)
– turning the set off
– pressing a preset button
– turning AutoSTore on (automatic
storage)
– changing the listening source
(Radio, CD Changer)
– changing the FM level or frequen-
cy band selectedManual station storage
The station being heard can be
stored in the range selected with
buttons numbered from 1 to 6.
Keep one of these buttons (from 1
to 6) pressed. After storage, the dis-
play shows the number of the button
with which the station has been
stored and a confirmation beep
sounds.
AutoSTore function
(automatic station storage)
To switch on the AutoSTore func-
tion, keep the13(BAND
AS) but-
ton pressed. With this function the
radio automatically stores the sta-
tions with the strongest signal in
decreasing order of intensity of the
FMAST frequency band.
IMPORTANT Activating the
AutoSTore function cancels the sta-
tions stored previously in the
FMAST band.During automatic storage the dis-
play shows “TUNER FMAST” or
“TUNER AMAST” if in the
TUNER mode (Radio) with FM or
AM frequency bands. To interrupt
the storage process, press the 13
(BAND
AS) button again: the radio
will automatically tune to the station
heard before activation of the
AutoSTorefunction.
Listening to stored stations
Proceed as follows:
– select the required frequency
band and the storing section (FM1,
FM2, FM3, FMAST, MW, LW,
AMAST);
– briefly press (less than 1 second)
one of the six station storage but-
tons.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 54
Page 56 of 86

RADIO WITH COMPACT DISC PLAYER
55 Nero- Testo 603.46.306 Radio Stilo gb
55
The display will show the station
name (if any) and frequency, and on
the bottom line of the display will be
shown “Pn” where ncorresponds
to the active presetting number.
In bands FM1, FM2 and FM3 if
reception is poor and the AF alter-
native frequency search function is
active, the station with the strongest
signal that is broadcasting the same
programme will be sought automati-
cally.
AF function
(alternative frequency search)
To turn on/off the alternative fre-
quency search function (AF func-
tion), press briefly (less than 1 sec-
ond) the 8(AF PTY) button. The
name RDS (if available) stays on the
display and if the AF function has
been turned on the message AF
SWITCHING: ONis displayed.
– “AF SWITCHING: ON”=
alternative frequency search on
– “AF SWITCHING: OFF” =
alternative frequency search off.When the signal of the RDS station
tuned weakens, the following two
cases may occur:
– With “AF SWITCHING:ON”
the RDS system activates automatic
tuning of the optimum frequency of
the station chosen, with the stations
enabled, therefore the radio is auto-
matically tuned to the station with
the strongest signal that is broadcast-
ing the same programme. During the
journey it will thus be possible to
continue listening to the station cho-
sen without having to change the fre-
quency when changing area. Of
course, the station being listened to
must be receivable in the area the car
is crossing.
– With “AF SWITCHING: OFF”
the radio will not tune the strongest
station automatically and it will have
to be found manually using the tuner
buttons.TA function
(traffic information)
Certain stations in the FM band (in
FM1, FM2, FM3 and FMAST storing
sections) are enabled to also broad-
cast information about traffic condi-
tions. When listening to traffic infor-
mation the display shows “TRAF-
FIC INFO” and the current station
(e.g. station name) alternately.
To turn the TA (traffic information)
function on/off, briefly press (less
than 1 second) the 9(TA) button. If
the function is on the display shows
“TA-ON”.
With the TAfunction on, at the
start of the traffic bulletin the radio
stops temporarily the current sta-
tion or the CD in order to broadcast
traffic information. This is possible
only if the current station selected
and the station broadcasting traffic
information are connected for the
EONfunction.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 55
Page 58 of 86

RADIO WITH COMPACT DISC PLAYER
57 Nero- Testo 603.46.306 Radio Stilo gb
57
PTY function reactivation
Press button8(AF
PTY) for over 2
seconds…. Then, the last pro-
gramme type selected is displayed
(e.g. “POP”).
Setting the programme type
Press button 8(AF
PTY), for over
2 seconds and the PTY code of the
current station will be displayed.
Select the required code turning the
button/knob 10(VOL PUSH
ON/OFF). Then press one of the
15(<<) or 6(>>) buttons to start
the automatic search of stations
broadcasting with the selected PTY
code. Automatic PTY search stops
automatically on next station offer-
ing the preset programme type and
shows the type of programme (e.g.
“POP”) and the word “PTY” flash-
es.
IMPORTANTIf no station is
available with this type of pro-
gramme, the station selected previ-
ously is heard and the PTY function
is abandoned.PTY function deactivation
When selecting the PTY mode, if
no operation is performed within 10
seconds, the radio returns to the
mode selected before pressing but-
ton 8 (AF
PTY) and stores the last
PTY code selected.
MENU
Functions of the
12(MENU
RDS)button
To activate the menu function,
briefly press (less than 1 second) the
12(MENU
RDS) button.
in this way you enter the first level
menu. To enter the second level
keep the 12(MENU
RDS) button
pressed for over 2 seconds.
To scroll the menu functions press
repeatedly the 12(MENU
RDS) but-
ton.The functions controlled by the
first levelmenu are:
1Manual tuning seek on/off (MAN-
UAL TUNING SEEK)
2Function confirmation beep
(BEEP)
3Tuning sensitivity adjustment
(SENS DX/LO)
4News programmes on/off
(NEWS)
5Volume control according to
speed (SVC)
6Tuning adjustment on traffic
information (EON TA)
7Loudness on/off (LOUDNESS)
8CD Compression
To turn selected function on/off
press buttons15(<<) or6(>>).
9Allocate a name to a CD/select
CD tracks (TPM = Track Program
Memory)
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 57
Page 59 of 86

58 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH COMPACT DISC PLAYER
58
The functions controlled by the
second levelmenu are:
1Current RDS station time display
(if any)
2audio distortion clipper on/off
(AUDIO CLIP DETECT)
3Max. volume setting at switching
on (MAX VOLUME)
4Phone volume adjustment func-
tion (PHONE)
5AUTO setting selection through
which radio on/off depends on
engine starting/stopping.
To turn the selected function on/off
press button/knob 10(VOL PUSH
ON/OFF).
NOTEWhen passing to next set-
ting item, the previous set one is
stored.
ADJUSTMENTS
First level menu functions
1 - manual tuning seek on/off
(TUNING SEEK)
This function enables to search
manually (MANUAL) or automatical-
ly (AUTO) the stored stations.To switch from manual to automat-
ic press buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “TUNING SEEK: AUTO”:
automatic seek on
– “TUNING SEEK: MANUAL”:
manual seek on.
2 - function confirmation beep
(BEEP)
System is fitted with the BEEP
function (the display shows
“ROGER BEEP-ON”).
This function confirms button
pressing by a sound indication
(BEEP).
To turn this function on/off, press
buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “ROGER BEEP: ON” = func-
tion on
– “ROGER BEEP: OFF” = func-
tion off.3 - tuner sensitivity adjustment
(SENS DX/LO)
With this function it is possible to
change the sensitivity of automatic
station searching. When low sensi-
tivity is set “SENSITIVITY:
LOCAL” only stations with excel-
lent reception are sought; when high
sensitivity is set “SENSITIVITY:
DISTANT” all stations are sought.
Therefore, if the car is in an area
with a considerable number of sta-
tions and you want to choose only
those with a strong signal, set to low
sensitivity “SENSITIVITY:
LOCAL”.
To turn this function on/off, press
buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “SENSITIVITY: LOCAL” =
low sensitivity
– “SENSITIVITY: DISTANT” =
high sensitivity.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 58
Page 60 of 86

RADIO WITH COMPACT DISC PLAYER
59 Nero- Testo 603.46.306 Radio Stilo gb
59
4 - News programmes on/off
(NEWS)
This function is similar to the TA
function: with FM station and NEWS
mode active, if a news programme is
broadcast, the radio operates as fol-
lows:
– it sets the same volume as the TA
function, if the TUNERsource is
active;
– it switches from active source
(CD or CDC) to TUNERmode, in
case of other source, setting the
same volume as the TA function.
To make use of this function, the
radio, in TUNER, mode, must be
tuned on a FM station broadcasting
the NEWS code.
To turn this function on/off press
buttons 15 (<<) or 6 (>>).
The display will show the current
status of the function:
– “NEWS: ON” = function on
– “NEWS: OFF” = function off5 - SVC, volume changing
with car speed
The SVC function makes it possible
to automatically adapt the volume
level to the speed of the car, increas-
ing it as the speed increases to main-
tain the ratio with the noise level
inside the passenger compartment.
Press 15(<<) or 6(>>) to change
SVC setting, thus passing from OFF
to the selected gain level (from 1to
7). High gain level values correspond
to proportionally higher volume
increases according to speed.
The display will show the current
status of the function:
“SPEED VOLUME OFF” =
function off
“SPEED VOLUME: +3” = func-
tion on and gain level indication6 - tuning adjustment on traffic
information (EON TA DX/LO)
This function enables to adjust
reception sensitivity of radio stations
broadcasting traffic information.
To turn this function on/off press
buttons 15 (<<) or 6 (>>).
The display will show the current
status of the function:
– “TRAFFIC: LOCAL” = low
sensitivity
– “TRAFFIC: DISTANT” = high
sensitivity
7 - loudness on/off (LOUD-
NESS)
The LOUDNESS function improves
the sound volume when listening at
low level, increasing the basses and
trebles.
To turn this function on/off press
buttons 15(<<) or 6(>>).
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 59
Page 61 of 86

60 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH COMPACT DISC PLAYER
60
The display will show the current
status of the function:
“LOUDNESS: ON” = loudness
on
“LOUDNESS: OFF” = loudness
off
8 - CD Compression
This function optimises sound level
according to the type of music
played by the CD.
To turn this function on/off, press
buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “COMPRESSION: ON” =
function on
– “COMPRESSION: OFF” =
function off9 - allocate a name to a
CD/select CD tracks (TPM)
This function can be chosen only if
a Compact Disc is inserted.
If the CD already has a name, this
will be shown on the display.
The TPM function enables the fol-
lowing:
– to name up to 10 CDs with max.
12 characters
– to select played tracks (in the
original sequence and up to 99 max.)
Every CD is identified by total play-
ing time and total number of tracks.
To name a CD (CD Naming) pro-
ceed as follows:
– the display shows “Name 1:”
– use button/knob 10(VOL
PUSH ON/OFF) to select the CD
(1 to 10) to be named (active only if
the 10 memories for the CD names
are all used);
– press button 6(>>) to confirm
the CD– the first character relevant to the
CD name flashes to indicate the cur-
sor position
– use button/knob 10 (VOL
PUSH ON/OFF) to select letters
(from “A” to “Z”) for allocating the
name to the CD
– use button 6(>>) or 15(<<) to
move the cursor along characters
– press button 12(MENU
RDS) to
confirm the CD name and to move
to TPM function TPM (Track
Program Memory)
– the display shows the default
message “PLAY TRACK: ALL”;
selecting ALLon TPM, the display
will show “PLAY TRACK: ALL”;
otherwise “PLAY TRACK: 10 – Y
or N” (YESor NO) wil be dis-
played
– use button/knob 10(VOL
PUSH ON/OFF) to select
between ALL, 1, 2, 3… max
track no.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 60
Page 62 of 86

RADIO WITH COMPACT DISC PLAYER
61 Nero- Testo 603.46.306 Radio Stilo gb
61
– use button 6(>>) or 15(<<) to
enter or exclude the current track
no. from the TPM list
– press button 12(MENU
RDS) to
confirm the CD playing sequence
thereby moving to the next menu
function
IMPORTANTWhen entering
name or TPM, the radio returns to
the current source without storing
modifications if no button is pressed
for at least 20 seconds.Second level menu functions
1 - RDS station time display
This function makes it possible to
display current RDS station time (if
this information is present).
2 - audio distortion clipper
on/off (AUDIO CLIP DETECT)
This function reduces automatically
the radio output level when exces-
sive distortion is detected that could
damage the speakers.
To turn this function on/off, press
buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
“CLIP DETECT: ON” = func-
tion on
“CLIP DETECT: OFF” = func-
tion off3 - max. volume setting at
switching on (MAX VOLUME)
This function makes it possible to
set the radio volume (from 10 to 33)
at switching on.
To adjust volume use button/knob
10(VOL PUSH ON/OFF).
The display will show the set vol-
ume (e.g. “MAX VOLUME: 25”)
4 - phone volume adjustment
function (PHONE)
With this function it is possible to
adjust the phone volume (volume
level setting 1to 3).
The display shows the default mes-
sage “PHONE LEVEL: OFF” (vol-
ume set by Manufacturer and corre-
sponding to the max. level).
Using the button/knob 10(VOL
PUSH ON/OFF) the volume can
be adjusted at 3 different levels
(PHONE LEVEL 1, PHONE
LEVEL 2and PHONE LEVEL 3):
the higher the figure is, the lower is
the volume.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 61
Page 63 of 86

62 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH COMPACT DISC PLAYER
62
5 - AUTO function setting
With this function it is possible to
set radio turning on/off depending on
car ignition/stopping or independent
radio turning on/off.
With this function on (radio is set
to switch off when the car is
switched off), it is however possible
to switch on the radio.
With this function off, when
switching off the car the radio stays
on.
To turn this function on/off, press
buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “AUTO: ON” = function on
– “AUTO: OFF” = function offCOMPACT DISC PLAYER
fig. 9
You radio is fitted with a Compact
Disc player for sound CDs.
Compact Disc insertion and ejec-
tion are facilitated by a powered
mechanism.
Selecting the Compact
Disc player
To turn on the Compact Disc play-
er integrated in the set, when a CD
is already inserted, turn the set on
pressing button/knob 10(VOL
PUSH ON/OFF), then briefly (less
than 1 second) and repeatedly press
button 14(SRC) to select the “CD”
mode.
Inserting a CD, also with the device
off, the CD player is turned on. Inserting/ejecting a CD
To insert the CD set it gently in
place to activate the powered load-
ing system, which will position it cor-
rectly.
Press 1(˚) with the device on to
operate the powered CD eject sys-
tem.
Display information
When the CD player is working,
the display shows information which
has the following meaning:
“CD”: shows the CD mode
“TRACK 12”: shows the number
of the track on the CD
“11.04”: shows the time elapsed
since the start of the track
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 62
Page 69 of 86

Waiting time passes keeping the
radio on. When turning the radio
on/off, counting restarts from the
start of the current attempt.
The waiting time is over when the
display shows the figure and the
dashes of the next attempt (e.g. 2 - -
- ).
Vain attempts Waiting
(on display) time (approx.)
1 1 minute
2 2 minutes
3 4 minutes
4 8 minutes
5 16 minutes
6 30 minutes
7 1 hour
8 2 hours
9 4 hours
10 8 hours
11 16 hours
12 24 hours
68 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH COMPACT DISC PLAYER
68
SECRET CODING
Entering radio’s secret code
Entry of the secret code is required
to allow the radio to work after the
first connection to the car electric
system different from the original
one.
Connecting the radio to the car
supply, the display shows “RADIO
M - CODE ----”.
The secret code comprises four fig-
ures, each corresponding to one of
the dashes.
To enter the first digit of the code,
press the corresponding button of
the preset stations (from 1 to 4).
Press repeatedly the preset buttons
1-4(16, 17, 18and 3) to enter the
secret code digits (from 0to 9).
To confirm the required digit press
4(5
RPT).Waiting times
If a wrong code is entered, the next
attempts to enter the code are
spaced by the following waiting
times. During these intervals the
radio can be connected or discon-
nected but not switched on.
During the waiting time the radio
shall not be on.
It shall however be connected with
+12V permanent voltage. The wait-
ing time is over when the display
shows the figure and the dashes of
the next attempt (e.g. 2 - - -).
The following table shows the
times between one attempt and the
other.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 68