ESP FIAT STILO 2005 1.G Radio Manual

5 Nero- Testo 603.46.306 Radio Stilo gb
5
Compact Disc
Remember that dirt, marks or dis-
tortion on Compact Disc can cause
skipping. For top performance con-
ditions, we give the following advice:
– Only use Compact Discs which
have the following brand: – never leave the cassette in the
radio when not in use;
– never insert other objects in the
cassette slot;
– do not expose cassettes to the
sun or high temperatures;
– put cassettes back in their boxes
after use;
– over time, dirt on the playing
head caused by tapes may reduce the
high notes when playing. You are
therefore advised to clean the head
routinely using a special cleaner
taper of the non abrasive type;
– preferably use C-60 cassettes and
in any case no longer than C-90 to
ensure the best playing conditions;
– avoid inserting cassettes with
damage tapes in the radio, especially
if using C-90 cassettes, as the tape
might come out and get stuck;
– do not lubricate the cassette
mechanism;
– do not touch the player head
with magnetic or hard objects.– After use, put Compact Discs
back in their container, to avoid
marks or scratches that may cause
skipping when playing.
– Do not expose Compact Discs to
direct sunlight, high temperatures or
damp for prolonged lengths of time
to prevent them from bending.
– Do not stick labels or write on
the recorded surface of Compact
Discs with pens or pencils.
To remove a Compact Disc from
its container, press the centre and
raise the disc carefully, holding it by
the outer circumference.
– Carefully clean all Compact Discs
of fingerprints and dust using a soft
cloth. Support Compact Discs from
the outer circumference and clean
from the centre outwards.
– Never use chemical products for
cleaning (e.g. spray cans, antistatic or
thinners) as they might damage the
surface of Compact Discs.
Modo corretto di tenere
il compact discEstrazione del disco
Always hold Compact Discs by the
outer circumference. Never touch
the surface.
Removing the discProper way to hold the
compact disc
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 5

20 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH CASSETTE PLAYER
20
The “FMAST” reception band is
reserved to the stations stored auto-
matically with the AutoSTorefunc-
tion.
The AMband is divided into sec-
tions: MW, LWand AMAST. The
AMASTsection is reserved to the
stations stored automatically with
the AutoSTorefunction.
The radio is always ready to
receive stations in the RDS mode
(Radio Data System).
Presetting buttons
The buttons with symbols from 1
to 6 (“3”, “4”, “5”, “16”, “17, “18”)
make it possible to set the following
presettings:
– 24 in the FM band (6 in FM 1, 6 in
FM 2, 6 in FM 3, 6 in FMAST)
– 6 in the LW band
– 6 in the MW band
– 6 in the AMAST bandTo call a preset station, choose the
required frequency band and then
press briefly (less than 1 second) the
corresponding preset button (from 1
to 6). The display will show the name
and the presetting number.
Storing the last station heard
The radio automatically keeps in
storage the last station heard for
each reception band, which is then
tuned when the radio is turned on or
the reception band is changed. RADIO (Tuner) fig. 1
When the set is turned on the last
function selected before turning off
is played (Radio, Cassette or CD
Changer).
To select the Radio source while
listening to a cassette or Compact
Disc, press briefly (less than 1 sec-
ond) and repeatedly the 14(SRC)
button until this function is selected.
If in the radio source, press briefly
(less than 1 second) and repeatedly
the 13(BAND
AS) button to select
the required reception band.
Every time the button 13 (BAND
AS) is pressed, the following bands
are selected in sequence: “FM1”,
FM2”, “FM3”, “FM4AST”, “LW”,
“MW” and “AMAST”.
The FMband is divided into sec-
tions: FM1, FM2, FM3and
FMAST. The FMASTsection is
reserved to the stations stored auto-
matically with the AutoSTorefunc-
tion.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 20

RADIO WITH CASSETTE PLAYER
23 Nero- Testo 603.46.306 Radio Stilo gb
23
The display will show the station
name (if any) and frequency, and on
the bottom line of the display will be
shown “Pn” where ncorresponds
to the active presetting number.
In bands FM1, FM2, FM3 and
FMAST, if reception is poor and the
AF alternative frequency search
function is active, the station with
the strongest signal that is broad-
casting the same programme will be
sought automatically.
AF function (alternative fre-
quency search)
To turn on/off the alternative fre-
quency search function (AF func-
tion), press briefly (less than 1 sec-
ond) the 8(AF
PTY) button. The
name RDS (if available) stays on the
display and if the AF function has
been turned on the messageAF
SWITCHING:ONis displayed.
– “AF SWITCHING: ON” =
alternative frequency searchon
– “AF SWITCHING: OFF” =
alternative frequency search off.When the signal of the RDS station
tuned weakens, the following two
cases may occur:
– With “AF SWITCHING: ON”
the RDS system activates automatic
tuning of the optimum frequency of
the station chosen, with the stations
enabled, therefore the radio is auto-
matically tuned to the station with
the strongest signal that is broad-
casting the same programme. During
the journey it will thus be possible to
continue listening to the station cho-
sen without having to change the fre-
quency when changing area. Of
course, the station being listened to
must be receivable in the area the
car is crossing.
– With “AF SWITCHING:
OFF” the radio will not tune the
strongest station automatically and it
will have to be found manually using
the tuner buttons.TA function (traffic informa-
tion)
Certain stations in the FM band (in
FM1, FM2, FM3 and FMAST storing
sections) are enabled to also broad-
cast information about traffic condi-
tions. When listening to traffic infor-
mation the display shows "TRAF-
FIC INFO" and the current station
(e.g. station name) alternately.
To turn the TA (traffic information)
function on/off, briefly press (less
than 1 second) the 9(TA) button. If
the function is on the display shows
“TA-ON”.
With the TAfunction on, at the
start of the traffic bulletin the radio
stops temporarily the current sta-
tion or the cassette/CD in order to
broadcast traffic information. This is
possible only if the current station
selected and the station broadcasting
traffic information are connected for
the EONfunction.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 23

RADIO WITH CASSETTE PLAYER
27 Nero- Testo 603.46.306 Radio Stilo gb
27
4 - News programmes on/off
(NEWS)
This function is similar to the TA
function: with FM station and NEWS
mode active, if a news programme is
broadcast, the radio operates as fol-
lows:
– it sets the same volume as the TA
function, if the TUNERsource is
active;
– it switches from active source
(cassette or CDC) to TUNER
mode, in case of other source, set-
ting the same volume as the TA func-
tion.
To make use of this function, the
radio, in TUNERmode, must be
tuned on a FM station broadcasting
the NEWS code.
To turn this function on/off, press
buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “NEWS: ON” = function on
– “NEWS: OFF” = function off5 - SVC, volume changing with
car speed
The SVC function makes it possible
to automatically adapt the volume
level to the speed of the car, increas-
ing it as the speed increases to main-
tain the ratio with the noise level
inside the passenger compartment.
Press 15 (<<) or 6(>>) to change
SVC setting, thus passing from OFF
to the selected gain level (from 1to
7). High gain level values correspond
to proportionally higher volume
increases according to speed.
The display will show the current
status of the function:
“SPEED VOLUME OFF” =
function off
“SPEED VOLUME: +3” = func-
tion on and gain level indication6 - tuning adjustment on traffic
information (EON TA DX/LO)
This function enables to adjust
reception sensitivity of radio stations
broadcasting traffic information.
To turn this function on/off press
buttons 15(<<) or 6(>>)
The display will show the current
status of the function:
– “TRAFFIC: LOCAL” = low
sensitivity
– “TRAFFIC: DISTANT” = high
sensitivity
7 - loudness on/off (LOUDNESS)
The LOUDNESS function improves
the sound volume when listening at
low level, increasing the basses and
trebles.
To turn this function on/off press
buttons 15(<<) or 6(>>)
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 27

34 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH CASSETTE PLAYER
34
Random track playing
(RaNDom function)
To start random playing of tracks
on the Compact Disc selected, press
the preset button 5(6
RND). A new
track will be played and the display
will show “CDC RANDOM
DISK”. To start random playing of
all the CDs contained in the CD
Changer, press a second time 5(6
RND); the display will show “CDC
RANDOM PACK”. Press 5(6
RND) a third time to urn the function
off: the display will show “CDC
RANDOM OFF”.
Changing the sound source, the
function is turned off.Stopping and ejecting the CD
Press 1(Ä
) or 14(SRC) button to
return to the radio mode.SECRET CODING
Entering radio’s secret code
Entry of the secret code is required
to allow the radio to work after the
first connection to the car electric
system different from the original
one.
Connecting the radio to the car
supply, the display shows “RADIO
M - CODE ----”.
The secret code comprises four fig-
ures, each corresponding to one of
the dashes.
To enter the first digit of the code,
press the corresponding button of
the preset stations (from 1to 4).
Press repeatedly the preset buttons
1-4(16, 17, 18and 3) to enter the
secret code digits (from 0to 9).
To confirm the required digit press
4(5
RPT).
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 34

RADIO WITH CASSETTE PLAYER
35 Nero- Testo 603.46.306 Radio Stilo gb
35
Vain attempts Waiting
(on display) time (approx.)
1 1 minute
2 2 minutes
3 4 minutes
4 8 minutes
5 16 minutes
6 30 minutes
7 1 hour
8 2 hours
9 4 hours
10 8 hours
11 16 hours
12 24 hours
Entering the secret code
of the CD Changer
Should the control code between
the radio and the CD Changer be
not recognised, to reset CD
Changer proper operation the four-
digit secret code must be entered
manually.
When entering the secret code,
the display shows: “CDC M --
CODE ----”.
The secret code comprises four fig-
ures, each corresponding to one of
the dashes and is different for each
CD Changer.
To enter the first digit of the code,
press the corresponding button of
the preset stations (from 1to 4).
Press repeatedly the preset buttons
1-4(16, 17, 18and 19) to enter the
secret code digits (from 0to 9). Waiting times
If a wrong code is entered, the next
attempts to enter the code are
spaced by the following waiting
times.
During the waiting time the radio
shall not be on.
It shall however be connected with
+12V permanent voltage. The wait-
ing time is over when the display
shows the figure and the dashes of
the next attempt (e.g. 2 - - - ).
The following table shows the
times between one attempt and the
other.
Waiting time passes keeping the
radio on. When turning the radio
on/off, counting restarts from the
start of the current attempt.
The waiting time is over when the
display shows the figure and the
dashes of the next attempt (e.g. 2 -
- - )
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 35

52 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH COMPACT DISC PLAYER
52
RADIO (Tuner) fig. 9
When the set is turned on the last
function selected before turning off
is played (Radio, Compact Disc or
CD Changer).
To select the Radio source while
listening to a Compact Disc, press
briefly (less than 1 second) and
repeatedly the 14(SRC) button
until this function is selected.
If in the radio source, press briefly
(less than 1 second) and repeatedly
the 13(BAND
AS) button to select
the required reception band.
Every time the button 13(BAND
AS) is pressed, the following bands
are selected in sequence: “FM1”,
FM2”, “FM3”, “FM4AST”, “LW”,
“MW” and “AMAST”
The FMband is divided into sec-
tions: FM1, FM2, FM3and
FMAST. The FMAST section is
reserved to the stations stored auto-
matically with the AutoSTorefunc-
tion.The “FMAST” section is reserved
to the stations stored automatically
with the AutoSTorefunction.
The AMband is divided into sec-
tions: MW, LWand AMAST. The
AMASTsection is reserved to the
stations stored automatically with
the AutoSTorefunction.
The radio is always ready to
receive stations in the RDS mode
(Radio Data System).
Presetting buttons
The buttons with symbols from 1
to 6 (“3”, “4”, “5”, “16”, “17, “18”)
make it possible to set the following
presettings:
– 24 in the FM band( 6 in FM 1, 6 in
FM 2, 6 in FM 3, 6 in FMAST)
– 6 in the LW band
– 6 in the MW band
– 6 in the AMAST bandTo call a preset station, choose the
required frequency band and then
press briefly (less than 1 second) the
corresponding preset button (from 1
to 6). The display will show the
name, the frequency and the preset-
ting number.
Storing the last station heard
The radio automatically keeps in
storage the last station heard for
each reception band, which is then
tuned when the radio is turned on or
the reception band is changed.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 52

RADIO WITH COMPACT DISC PLAYER
55 Nero- Testo 603.46.306 Radio Stilo gb
55
The display will show the station
name (if any) and frequency, and on
the bottom line of the display will be
shown “Pn” where ncorresponds
to the active presetting number.
In bands FM1, FM2 and FM3 if
reception is poor and the AF alter-
native frequency search function is
active, the station with the strongest
signal that is broadcasting the same
programme will be sought automati-
cally.
AF function
(alternative frequency search)
To turn on/off the alternative fre-
quency search function (AF func-
tion), press briefly (less than 1 sec-
ond) the 8(AF PTY) button. The
name RDS (if available) stays on the
display and if the AF function has
been turned on the message AF
SWITCHING: ONis displayed.
– “AF SWITCHING: ON”=
alternative frequency search on
– “AF SWITCHING: OFF” =
alternative frequency search off.When the signal of the RDS station
tuned weakens, the following two
cases may occur:
– With “AF SWITCHING:ON”
the RDS system activates automatic
tuning of the optimum frequency of
the station chosen, with the stations
enabled, therefore the radio is auto-
matically tuned to the station with
the strongest signal that is broadcast-
ing the same programme. During the
journey it will thus be possible to
continue listening to the station cho-
sen without having to change the fre-
quency when changing area. Of
course, the station being listened to
must be receivable in the area the car
is crossing.
– With “AF SWITCHING: OFF”
the radio will not tune the strongest
station automatically and it will have
to be found manually using the tuner
buttons.TA function
(traffic information)
Certain stations in the FM band (in
FM1, FM2, FM3 and FMAST storing
sections) are enabled to also broad-
cast information about traffic condi-
tions. When listening to traffic infor-
mation the display shows “TRAF-
FIC INFO” and the current station
(e.g. station name) alternately.
To turn the TA (traffic information)
function on/off, briefly press (less
than 1 second) the 9(TA) button. If
the function is on the display shows
“TA-ON”.
With the TAfunction on, at the
start of the traffic bulletin the radio
stops temporarily the current sta-
tion or the CD in order to broadcast
traffic information. This is possible
only if the current station selected
and the station broadcasting traffic
information are connected for the
EONfunction.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 55

RADIO WITH COMPACT DISC PLAYER
59 Nero- Testo 603.46.306 Radio Stilo gb
59
4 - News programmes on/off
(NEWS)
This function is similar to the TA
function: with FM station and NEWS
mode active, if a news programme is
broadcast, the radio operates as fol-
lows:
– it sets the same volume as the TA
function, if the TUNERsource is
active;
– it switches from active source
(CD or CDC) to TUNERmode, in
case of other source, setting the
same volume as the TA function.
To make use of this function, the
radio, in TUNER, mode, must be
tuned on a FM station broadcasting
the NEWS code.
To turn this function on/off press
buttons 15 (<<) or 6 (>>).
The display will show the current
status of the function:
– “NEWS: ON” = function on
– “NEWS: OFF” = function off5 - SVC, volume changing
with car speed
The SVC function makes it possible
to automatically adapt the volume
level to the speed of the car, increas-
ing it as the speed increases to main-
tain the ratio with the noise level
inside the passenger compartment.
Press 15(<<) or 6(>>) to change
SVC setting, thus passing from OFF
to the selected gain level (from 1to
7). High gain level values correspond
to proportionally higher volume
increases according to speed.
The display will show the current
status of the function:
“SPEED VOLUME OFF” =
function off
“SPEED VOLUME: +3” = func-
tion on and gain level indication6 - tuning adjustment on traffic
information (EON TA DX/LO)
This function enables to adjust
reception sensitivity of radio stations
broadcasting traffic information.
To turn this function on/off press
buttons 15 (<<) or 6 (>>).
The display will show the current
status of the function:
– “TRAFFIC: LOCAL” = low
sensitivity
– “TRAFFIC: DISTANT” = high
sensitivity
7 - loudness on/off (LOUD-
NESS)
The LOUDNESS function improves
the sound volume when listening at
low level, increasing the basses and
trebles.
To turn this function on/off press
buttons 15(<<) or 6(>>).
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 59

Waiting time passes keeping the
radio on. When turning the radio
on/off, counting restarts from the
start of the current attempt.
The waiting time is over when the
display shows the figure and the
dashes of the next attempt (e.g. 2 - -
- ).
Vain attempts Waiting
(on display) time (approx.)
1 1 minute
2 2 minutes
3 4 minutes
4 8 minutes
5 16 minutes
6 30 minutes
7 1 hour
8 2 hours
9 4 hours
10 8 hours
11 16 hours
12 24 hours
68 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH COMPACT DISC PLAYER
68
SECRET CODING
Entering radio’s secret code
Entry of the secret code is required
to allow the radio to work after the
first connection to the car electric
system different from the original
one.
Connecting the radio to the car
supply, the display shows “RADIO
M - CODE ----”.
The secret code comprises four fig-
ures, each corresponding to one of
the dashes.
To enter the first digit of the code,
press the corresponding button of
the preset stations (from 1 to 4).
Press repeatedly the preset buttons
1-4(16, 17, 18and 3) to enter the
secret code digits (from 0to 9).
To confirm the required digit press
4(5
RPT).Waiting times
If a wrong code is entered, the next
attempts to enter the code are
spaced by the following waiting
times. During these intervals the
radio can be connected or discon-
nected but not switched on.
During the waiting time the radio
shall not be on.
It shall however be connected with
+12V permanent voltage. The wait-
ing time is over when the display
shows the figure and the dashes of
the next attempt (e.g. 2 - - -).
The following table shows the
times between one attempt and the
other.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 68