air condition FORD AEROSTAR 1997 1.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 1997, Model line: AEROSTAR, Model: FORD AEROSTAR 1997 1.GPages: 347, PDF Size: 1.79 MB
Page 65 of 347
62 % [CF00160(ALL)04/96]Air Conditioner and Heater (If equipped)
[CF00170(ALL)01/96]
The control for your air conditioner and heater
system is located near the center of the
instrument panel and operates only when the
ignition key is turned to the ON position. Your
air conditioner and heater heats or cools your
vehicle interior depending on the function and
the temperature you select. The right knob is the
SELECT knob which allows you to select heating
or cooling and determine where the air will be
directed. The TEMP knob setting determines the
temperature of the air that flows into the
vehicle.
[CF00180(ALL)01/96]
one third page art:0095031-A
Climate control knobs
[CF00190(ALL)01/96]
To turn your air conditioner and heater system
on, rotate the SELECT knob to any position
except OFF. This will turn the fan on and allows
airflow into the vehicle.
*
[CF00200(ALL)03/96]
Temperature selection
[CF00210(ALL)01/96]
The TEMP knob is the rotating knob located at
the center of the control with tapered red and
blue bands surrounding most of the knob. The
wide red part of the band (full right) is the heat
area. The wide blue area (full left) is the cooling
temperature area. Any position selected between
full right and full left will give a temperature
between the two extremes except in MAX A/C.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996
Page 67 of 347
64 [CF00280(ALL)01/96]Select MIX to direct air to the floor and
windshield defrosters at the same time. If the
outside temperature is about50ÊF (9ÊC) or
warmer, the air will also be dehumidified to
remove moisture. This feature will help prevent
fogging in humid weather. The air can be cooled
or heated.
[CF00290(ALL)01/96]
SelectVto obtain maximum airflow to the
windshield. Rotate the TEMP knob into the red
area for the air temperature required to defrost.
When the outside temperature is about50ÊF
(9ÊC) orwarmer, the air will be dehumidified to
remove moisture. Rotate thexknob on the left
to increase the airflow.
*
[CF00300(ALL)05/96]
Operating Tips
[CF00320(ALL)04/96]
The following tips help you get the most
satisfaction from your air conditioner and heater
system:
[CF00330(ALL)01/96]
q
In humid weather, selectVbefore starting
your engine. This helps prevent windshield
fogging. After a few minutes of operation,
you may select another airflow position.
[CF00340(ALL)04/96]
q
To prevent humidity buildup inside your
vehicle, always drive with the air conditioner
and heater system turned on.
*
[CF00350(ALL)01/96]
q
Do not put objects under the front seats that
interfere with the flow of air to the back seat
area.
*
[CF00360(ALL)03/96]
q
Remove any snow, ice, or leaves from the air
intake area at the bottom of the windshield.
[CF00370(ALL)01/96]
q
For maximum heating, rotate the function
selector knob to FLR, the temperature control
knob to the red (warm) range, and the fan
knob to HI.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996
Page 70 of 347
67
*
[CF00515(ALL)05/96]
Operating Tips
*
[CF00520(ALL)03/96]
The following tips will help you to get the most
satisfaction from your heater system.
[CF00530(ALL)01/96]
q
In humid weather, selectVbefore starting
your engine. This will help to prevent
windshield fogging. After a few minutes, you
may select another airflow position.
*
[CF00540(ALL)03/96]
q
To prevent humidity buildup inside your
vehicle, always drive with the heater system
turned on.
*
[CF00550(ALL)01/96]
q
Do not put objects under the front seats that
interfere with the flow of air to the back seat
area.
*
[CF00560(ALL)03/96]
q
Remove any snow, ice, or leaves from the air
intake area at the bottom of the windshield.
[CF00570(ALL)01/96]
q
For maximum heating, rotate the function
selector knob to FLR, the temperature control
knob to the red (warm) range, and the fan
blower knob to HI.
% [CF00580(ALL)04/96]
Auxiliary Heater and Air
Conditioner (If equipped)
[CF00590(ALL)04/96]
If your vehicle is equipped with a factory
installed auxiliary unit (heater or heater/air
conditioner), the front control assembly will
include separate switches for FRONT and REAR
fan control. Fan speed for front and rear systems
can be set as desired by adjusting these switches.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996
Page 129 of 347
127
*
[SS12700(ALL)05/96]
q
and the electrical wiring which connects the
components.
*
[SS12800(ALL)05/96]
The diagnostic module monitors its own internal
circuits and the supplemental air bag electrical
system readiness (including the impact sensors),
the system wiring, the air bag system readiness
light, the air bag backup power and the air bag
igniters.
*
[SS12900(ALL)05/96]
Determining if System Is Operational
*
[SS13000(ALL)05/96]
The Air Bag Supplemental Restraint System uses
a readiness light and a tone to indicate the
condition of the system. The readiness light is in
the instrument cluster. When you turn the
ignition key to ON, this light will illuminate for
approximately six (6) seconds and then turn off.
This indicates that the system is operating
normally. NOTE: Routine maintenance of the air
bag system is not required.
%*
[SS13100(ALL)05/96]
A problem with the system is indicated by one
or more of the following:
*
[SS13200(ALL)05/96]
q
the readiness light will either flash or stay lit,
*
[SS13300(ALL)05/96]
q
the readiness light will not light immediately
after ignition is turned on,
%*
[SS13400(ALL)05/96]
q
a group of five beeps will be heard. The tone
pattern will repeat periodically until the
problem and light are repaired.
*
[SS13500(ALL)05/96]
If any of these things happen, even
intermittently, have the Air Bag Supplemental
Restraint System serviced at your Ford or
Lincoln-Mercury dealer immediately. Unless
serviced, the system may not function properly
in the event of a collision.
File:06cpssa.ex
Update:Thu Jun 13 08:56:07 1996
Page 161 of 347
160
*
[TO09300(ALL)12/95]
Guarding Against Exhaust Fumes
*
[TO09400(ALL)01/96]
Carbon monoxide, although colorless and
odorless, is present in exhaust fumes. Take
precautions to avoid its dangerous effects.
*
[TO09600(ALL)01/96]
RWARNING
If you smell exhaust fumes inside your
vehicle, have your dealer inspect your
vehicle immediately. Do not drive if you
smell exhaust fumes.
[TO09700(ALL)04/96]
If your vehicle has rear windows and doors that
were installed as part of a van conversion, close
them while it is running. This prevents exhaust
fumes from being drawn into the passenger
compartment.
*
[TO09900(ALL)01/96]
Have the exhaust and body ventilation systems
checked whenever:
*
[TO10000(ALL)01/96]
q
your vehicle is raised for service
*
[TO10100(ALL)01/96]
q
the sound of the exhaust system changes
*
[TO10200(ALL)01/96]
q
your vehicle has been damaged in a collision
*
[TO10300(ALL)01/96]
Improve your ventilation by keeping all air inlet
vents clear of snow, leaves, and other debris.
*
[TO10400(ALL)01/96]
If the engine is idling while you are stopped in
an open area for long periods of time, open the
windows at least one inch (2.5 cm). Also, adjust
the heating or air conditioning system to bring
in outside air.
*
[TO10600(ALL)01/96]
q
HEATING Ð Set fan speed at MEDIUM or
HIGH, the function selector knob on VENT,
FLOOR, MIX, or the DEFROST symbol and
the temperature control knob on any desired
position.
File:08cptoa.ex
Update:Thu Jun 6 14:43:40 1996
Page 162 of 347
161 [TO10800(ALL)01/96]
q
AIR CONDITIONING Ð Set the fan speed
knob at MEDIUM or HIGH, the function
selector knob on NORM A/C or MAX A/C
and the temperature control knob on any
desired position.
*
[TO12000(ALL)03/96]
Removing the Key From the
Ignition
*
[TO12100(ALL)03/96]
1. Put the gearshift in P (Park).
*
[TO12200(ALL)03/96]
2. Set the parking brake fully before removing
your foot from the service brake. (This will
avoid ªbindingº or ªloadingº the park gear
if you park on a grade.)
*
[TO12300(ALL)03/96]
3. Turn the ignition key to LOCK.
*
[TO12400(ALL)03/96]
4. Remove the key.
*
[TO12500(ALL)05/96]
RWARNING
Always set the parking brake fully and
make sure the gearshift is latched in P
(Park). Turn off the ignition whenever you
leave your vehicle.
*
[TO12600(ALL)03/96]
RWARNING
Do not leave children, unreliable adults,
or pets unattended in your vehicle.
File:08cptoa.ex
Update:Thu Jun 6 14:43:40 1996
Page 178 of 347
178 [GF16025(ALL)01/96]How the Electronic 4-Wheel Drive (E-4WD)
System Works
[GF16036(ALL)01/96]
Under normal driving conditions, when the road
is firm, dry and level, the engine power is
distributed one-third to the front axle and
two-thirds to the rear axle. However, if a wheel
begins to slip, the microprocessor will sense this
condition and signal the system to transmit more
power to the axle with more traction. (You may
feel a momentary surge of power.)
[GF16046(ALL)01/96]
NOTE: The microprocessor is disabled when
the brakes are applied or when the
transmission selector is in the P (Park)
or N (Neutral) positions.
[GF16055(ALL)01/96]
Driving Your Electronic 4-Wheel Drive
(E-4WD) Vehicle
[GF16065(ALL)01/96]
Since your E-4WD vehicle is unique, follow these
steps to be safe:
[GF16075(ALL)01/96]
q
Avoid unnecessary turns or other maneuvers
that could cause loss of control and possible
injury.
[GF16076(ALL)01/96]
q
Use the same size and type of tire and wheel
as originally provided for your vehicle and
inflate the tires to the manufacturer's
recommended air pressure.
[GF16077(ALL)01/96]
q
Become familiar with your vehicle's operating
characteristics and study this Owner Guide
for specific operating instructions. Be sure all
occupants wear the safety belts provided.
Drive cautiously, defensively, and at speeds
safe for current road conditions.
File:09cpgfa.ex
Update:Wed Jun 5 12:04:06 1996
Page 185 of 347
185 %
*
[GF30801(ALL)01/96]
Gross Axle Weight Rating (GAWR)
*
[GF30850(ALL)01/96]
We have all seen a car or a truck that is loaded
down in the rear and riding high in the front.
This is a dangerous condition that usually means
that the rear suspension components are under
severe strain and that vehicle handling is
impaired. There is more to carrying a load than
just payload or GVWR.
*
[GF30901(ALL)01/96]
Your Safety Compliance Certification Label not
only gives the GVWR, it also gives the Gross
Axle Weight Rating (GAWR) which is the
carrying capacity for each axle system. For
trucks, the rear axle will be designed to carry
more weight than the front.
*
[GF30950(ALL)01/96]
The rating is based on the carrying capacity of
thelowest ratedaxle and suspension component
as well as other factors. This is why it's so
important to observe vehicle loading ratings.
Overloading a vehicle punishes components and
can lead to shortened service life or outright
failure.
*
[GF31001(ALL)01/96]
The capacity of the tires is included as part of
the axle and suspension system, which is to be
considered when determining the lowest rated
component. Tires are rated to carry a specific
maximum load at a specific maximum tire
pressure.
*
[GF31050(ALL)01/96]
Passenger car type tires when installed on light
trucks and multipurpose passenger vehicles are
rated at 10% lower load carrying capacity due to
the differences in vehicle usages.
*
[GF31101(ALL)01/96]
The vehicle must not be loaded to both the front
and rear GAWR because the GVWR will be
exceeded. The GAWR of the front and rear axles
exceeds the GVWR when added together to
allow flexibility in fore and aft loading of cargo.
File:09cpgfa.ex
Update:Wed Jun 5 12:04:06 1996
Page 197 of 347
197
*
[GF39300(ALL)01/96]
Allow more room for stopping with a trailer
attached. Trailer brakes should be applied first,
whether manually or automatically controlled,
when approaching a stop.
*
[GF39400(ALL)01/96]
For a good handling truck-trailer combination,
the trailer tongue load should be approximately
10-15% of the loaded trailer weight.
*
[GF39500(ALL)01/96]
Make a thorough check of your equipment
before starting out on the road. After you have
traveled about 50 miles (80 km) stop in a
protected area and double-check your hitch and
electrical connections. Also check trailer wheel
lug nuts for tightness.
*
[GF39600(ALL)01/96]
When turning, drive slightly beyond the normal
turning point so the trailer wheels will clear
curbs or other obstructions.
*
[GF39725(ALL)01/96]
When stopped in traffic for long periods of time
in hot weather, place the gearshift selector lever
in P (PARK) to increase the engine idle speed.
This aids in engine cooling and air conditioner
efficiency. If the engine overheats, move the
function selector knob to VENT to stop the
compressor and increase the engine speed for a
short time.
*
[GF39800(ALL)05/96]
RWARNING
Do not tow a trailer when using a
temporary spare tire.
*
[GF39900(ALL)01/96]
Vehicles with trailers should not be parked on a
grade. However, if you must park on a grade,
place wheel chocks under the trailer's wheels as
follows:
*
[GF40000(ALL)01/96]
q
Apply the brake pedal and hold.
*
[GF40100(ALL)01/96]
q
Have another person place the wheel chocks
under the trailer wheels.
File:09cpgfa.ex
Update:Wed Jun 5 12:04:06 1996
Page 230 of 347
231
*
[MC02500(ALL)01/96]
If you disconnect the battery, the engine must
ªrelearnº its idle conditions before your vehicle
will drive properly. To find out how the engine
does this, seeBatteryin this chapter.
*
[MC02600(ALL)01/96]
Working with the engine off:
*
[MC02650(ALL)01/96]
1. Set the parking brake fully and make sure
that the gearshift is securely latched in P
(Park).
*
[MC02700(ALL)01/96]
2. Remove the key from the ignition after you
turn the engine off.
*
[MC02725(ALL)01/96]
3. Block the wheels. This will prevent your
vehicle from moving unexpectedly.
*
[MC02750(ALL)01/96]
Working with the engine on:
*
[MC02785(ALL)01/96]
1. Set the parking brake fully and make sure
that the gearshift is securely latched in P
(Park).
*
[MC02800(ALL)01/96]
2. Block the wheels. This will prevent your
vehicle from moving unexpectedly.
*
[MC02900(ALL)01/96]
RWARNING
Do not start your engine with the air
cleaner removed and do not remove it
while the engine is running.
%*
[MC02950(ALL)02/96]
Opening the Hood
*
[MC03000(ALL)01/96]
1. Pull the hood release handle, located next to
the parking brake pedal.
File:11cpmca.ex
Update:Fri Jun 7 14:30:56 1996