radiator FORD AEROSTAR 1997 1.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 1997, Model line: AEROSTAR, Model: FORD AEROSTAR 1997 1.GPages: 347, PDF Size: 1.79 MB
Page 231 of 347
232 [MC03025(ALL)01/96]
one third page art:0095045-AHood release handle
*
[MC03050(ALL)01/96]
2. While applying downward pressure on the
hood, push the hood latch handle located
behind the grille near the center front of the
vehicle to the left.
*
[MC03100(ALL)01/96]
3. Disconnect the hood support from the
retaining clip on the radiator support and
place it into the slot marked PROP in the
underside of the hood.
[MC03400(ALL)01/96]
quarter page art:0020335-A
Hood and support rod
*
[MC03800(ALL)01/96]
To close the hood, raise it so that the support
rod comes away from the slotted hole in the
hood. Place the support rod in its retaining clip
and close the hood with enough force to make it
latch. Be sure to oil the hood latch every six
months to maintain smooth operation.
*
[MC03900(ALL)01/96]
Always attempt to lift the hood after closing to
be sure it is securely latched.
File:11cpmca.ex
Update:Fri Jun 7 14:30:56 1996
Page 240 of 347
241
*
[MC08755(ALL)05/96]
Adding Engine Coolant
[MC08760(ALL)01/96]
quarter page art:0020354-A
Adding engine coolant to reservoir
*
[MC08765(ALL)05/96]
RWARNING
Do not put engine coolant in the container
for the windshield washer fluid.
*
[MC08770(ALL)05/96]
When the engine is cool, add a 50/50 mixture of
engine coolant and water to the engine coolant
recovery reservoir Ð DO NOT ADD DIRECTLY
TO THE RADIATOR. Add straight water only in
an emergency, but you should replace it with a
50/50 mixture of coolant and distilled water as
soon as possible.
*
[MC08772(ALL)05/96]
Check the coolant level in the coolant recovery
reservoir the next few times you drive the
vehicle. If necessary, add enough of a 50/50
mixture of coolant and water to bring the liquid
level to the fill line on the reservoir.
*
[MC08775(ALL)05/96]
RWARNING
Never remove the coolant recovery cap
while the engine is running or hot.
[MC08780(ALL)01/96]
If you must remove the coolant recovery cap,
follow these steps to avoid personal injury
caused by escaping steam or engine coolant:
File:11cpmca.ex
Update:Fri Jun 7 14:30:56 1996