fuse chart FORD ASPIRE 1996 1.G Owners Manual

216 [SV34500(ALL)07/93]The following charts tell you which fuses protect
each electrical part of your vehicle. If a fuse
blows, all the parts of your car that use the
circuit will not work.
[SV34600(ALL)02/95]
Once you have determined which fuses to check,
follow the procedures underChecking and
replacing fuseslater in this chapter.
[SV35370(ALL)09/93]
Your Aspire has a main fuse block under the
hood and a regular fuse box mounted in the
instrument panel behind a cover.
[SV35390(ALL)05/93]
Main fuse block
[SV35420(ALL)03/94]
If the 80 Amp. fuse is blown, it must be
replaced. To remove the main fuse block and
replace the fuse:
[SV35430(ALL)07/95]
one third page art:0032220-B
Main fuse block location
[SV35440(ALL)05/93]
1. Disconnect the negative battery cable.
[SV35460(ALL)05/93]
2. Remove the nuts on either end.
[SV35480(ALL)05/93]
3. Lift the fuse block and open the flaps on the
side of the fuse block.
[SV35520(ALL)05/93]
4. Remove the bolts on either side of the block.
[SV35540(ALL)05/93]
5. Replace the fuse with a new one of the same
rating.
File:15icsvf.ex
Update:Wed Jan 24 14:56:41 1996

221 [SV36575(ALL)07/95]
fourteen pica chart:0032237-C
%*
[SV36600(ALL)06/95]
Checking and Replacing Fuses
[SV36800(ALL)05/95]
1. Find the fuse panel and remove the cover.
[SV36900(ALL)05/95]
2. Find the position of the fuse you want to
check.
[SV37000(ALL)05/95]
3. To remove the fuse, use the fuse puller
provided (located on the cover of the interior
fuse panel).
*
[SV37100(ALL)05/95]
quarter page art:0030248-B
Fuse puller tool and fuse
File:15icsvf.ex
Update:Wed Jan 24 14:56:41 1996

222 [SV37200(ALL)05/95]4. Look through the transparent side of the
fuse to see if the metal wire inside is
separated. If it is, replace the fuse with one
of the same amperage only. You can use the
amp rating number on the fuse as well as
the color to identify the correct replacement.
*
[SV37300(ALL)05/95]
RWARNING
Always replace a fuse with one that has
the specified amperage rating. Using a
fuse with a higher amperage rating can
cause severe wire damage and could start
a fire.
[SV37350(ALL)05/95]
5. Reinstall the fuse puller on the inside of the
fuse panel cover.
[SV37400(ALL)05/95]
6. Install the fuse panel cover.
*
[SV37500(ALL)05/93]
Even after you replace a fuse, it will continue to
blow if you do not find what caused the
overload. If the fuse continues to blow, have
your electrical system checked.
*
[SV37525(ALL)03/94]
The following chart indicates the colors and
amperage ratings of standard fuses.
[SV37550(ALL)03/94]
twelve pica chart:0032119-AFile:15icsvf.ex
Update:Wed Jan 24 14:56:41 1996