buttons FORD ASPIRE 1997 1.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 1997, Model line: ASPIRE, Model: FORD ASPIRE 1997 1.GPages: 254, PDF Size: 1.85 MB
Page 24 of 254
21
%*
[AS21380(ALL)09/95]
Electronic Stereo and Stereo
Cassette Radios
*
[AS21400(ALL)03/96]
Using the Controls on Your New Radio
*
[AS21500(ALL)08/95]
How to turn the radio on and adjust the
volume
*
[AS21600(ALL)10/95]
Press the ªPOWERº button to turn the radio on.
Press it again to turn it off.
[AS22050(ALL)02/96]
Press the right (+) side of the ªVOLº button to
increase the volume. Press the left (S) side of
the button to decrease the volume.
[AS22075(ALL)04/96]
If the volume is set above a certain level when
the ignition is turned off, the volume level will
reset to a ªnominalº listening level when the
ignition switch is turned back on.
*
[AS22100(ALL)03/96]
Selecting the AM or FM frequency band
[AS22210(ALL)02/96]
Push the ªBANDº button to select the desired
frequency band. Pushing the button more than
once will alternate between AM, FM1 and FM2.
These functions are used with the station
memory buttons described underHow to tune
radio stations.
%*
[AS22300(ALL)03/96]
How to tune radio stations
[AS22405(ALL)04/96]
There are four ways for you to tune in a
particular station. You can manually locate a
station, ªSEEKº to the next station, ªSCANº for
listenable stations, or select the station using the
memory preset buttons, which you can set to
any desired frequency.
[AS22450(ALL)02/96]
q
Using the manual mode to tune your radio
[AS22500(ALL)02/96]
You can change the frequency up or down
one increment at a time by first pressing the
mode button until ªMANº appears above the
frequency display. Then, press either the right
(
a) or left (
b) side of the ªSEEKº button.
File:04icasf.ex
Update:Tue Mar 4 08:51:43 1997
Page 25 of 254
22
*
[AS22600(ALL)04/96]
q
Using the ªSEEKº function
[AS22625(ALL)04/96]
The ªSEEKº function allows you to
automatically select listenable stations up or
down the frequency band. This is the default
mode of the ªSEEKº button. If the radio has
been changed to another mode, press the
mode button until ªSEEKº appears above the
frequency display. Then press the right (
a)
side of the ªSEEKº button to select the next
listenable station up the frequency band.
Press the left (
b) side of the ªSEEKº button
to select the next listenable station down the
frequency band. By holding the button down,
listenable stations can be passed over to reach
the desired station.
*
[AS22650(ALL)04/96]
q
Using the ªSCANº function
[AS22675(ALL)04/96]
To enter scan mode, press the mode button
until ªSCANº appears above the frequency
display. Press the right (
a) side of the
ªSEEKº button and the radio will begin
scanning up the frequency band, stopping on
each listenable station for approximately a
five-second sampling. This continues until
you press the ªMODEº button once again.
Press the left (
b) side of the ªSEEKº button
to activate the SCAN function down the
frequency band.
*
[AS22700(ALL)02/96]
q
Setting the Station Memory Preset buttons
[AS22800(ALL)02/96]
Your radio is equipped with 4 station
memory buttons. The buttons can be used to
select up to 4 preset AM stations and 8
preset FM stations (4 in FM1 and 4 in FM2).
File:04icasf.ex
Update:Tue Mar 4 08:51:43 1997
Page 26 of 254
23
*
[AS23000(ALL)08/95]
Follow the easy steps below to set these buttons
to the desired frequencies:
*
[AS23500(ALL)03/96]
1. Select a band, then select a frequency.
*
[AS23700(ALL)10/95]
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that
button.
*
[AS23800(ALL)10/95]
3. Follow the two steps above for each station
memory preset button you want to set.
*
[AS24000(ALL)10/95]
Adjusting the tone balance and speaker
output of your radio
[AS24200(ALL)02/96]
q
Increasing or decreasing the bass response
[AS24300(ALL)03/96]
Push the ªSELECTº button repeatedly until
the display reads ªBASS.º Push the right (+)
side of the ªVOLº button to increase bass,
and push the left (S) side to decrease bass.
*
[AS24400(ALL)02/96]
q
Increasing or decreasing treble response
[AS24500(ALL)02/96]
Push the ªSELECTº button repeatedly until
the display reads ªTREB.º Push the right (+)
side of the ªVOLº button to increase treble,
and push the left (S) side to decrease treble.
*
[AS24600(ALL)02/96]
q
Adjusting speaker balance
[AS24700(ALL)04/96]
Balance control allows you to adjust the
sound distribution between the right and left
speakers. Push the ªSELECTº button
repeatedly until the display reads ªBAL.º
Push the right (+) side of the ªVOLº button
to shift the sound to the right speaker, and
push the left (S) side to shift the sound to
the left speaker.
File:04icasf.ex
Update:Tue Mar 4 08:51:43 1997
Page 28 of 254
25
*
[AS26900(ALL)08/95]
q
How to change the side of the tape being
played
*
[AS27000(ALL)09/95]
The alternate track (other side) of the tape
can be selected at any time by pushing both
fast-wind buttons (
hand
g) at the
same time. The number in the display will
alternate between 1 and 2.
*
[AS27100(ALL)08/95]
How to eject the tape
*
[AS27200(ALL)03/96]
To stop the tape and eject the cassette, press the
ªEJECTº button. The radio will resume playing.
[AS27300(ALL)04/96]
How to remove the faceplate (Cassette
radio only)
[AS27350(ALL)04/96]
Your cassette radio is equipped with a
detachable, theft-deterrent faceplate.
[AS27375(ALL)04/96]
q
Removing the faceplate
[AS27380(ALL)04/96]
Slide the release button downward. The
release button is located just above the
ªSEEKº button. The faceplate will spring out
slightly. Grasp the faceplate and remove.
[AS27400(ALL)04/96]
q
Reinstalling the faceplate
[AS27450(ALL)04/96]
Insert the left side of the faceplate into the
radio bezel, then rotate and ªclickº the right
side into place. If radio/cassette were on
before the faceplate was removed, they will
resume playing.
File:04icasf.ex
Update:Tue Mar 4 08:51:43 1997