ignition FORD B MAX 2014 1.G Quick Reference Guide

Downloaded from www.Manualslib.com manuals search engine Air vents.A
Direction indicators. High beam.B
Instrument cluster.C
Start button.D
Wiper lever.E
Information and entertainmentdisplay.F
Audio unit.G
Power door lock button.H
Hazard warning flasher switch.I
Climate controls. Heated rearwindow switch. Heatedwindshield switch.
J
Parking aid switch.K
Start-stop switch.L
Card holder or airbag warninglamp.M
Ignition switch.N
Cruise control switches.O
Horn.P
Driver knee airbag.Q
Steering wheel adjustment.R
Audio control. Voice control.S
Hood release lever.T
Lighting control. Front fog lamps.Rear fog lamp. Instrumentlighting dimmer.
U
FASTENING THE SAFETY
BELTS
Pull the belt out steadily. Hold the tongueand let it retract completely and smoothlyto its stowed position.
MYKEY™
The system allows you to program keyswith restricted driving modes to promotegood driving habits. You can use all but oneof the keys programmed to your vehiclewith these restricted modes.
Any keys that have not been programmedare referred to as an administrator key oradmin key. These can be used to:
•create a MyKey
•program optional MyKey settings
•clear all MyKey features.
When you have programmed a MyKey, youcan access the following information usingthe information display:
•How many admin keys and MyKeys areprogrammed to your vehicle.
•The total distance your vehicle hastraveled using a MyKey.
Note:Switch the ignition on to use thesystem.
2B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing

Downloaded from www.Manualslib.com manuals search engine Note:All MyKeys are programmed to thesame settings. You cannot program themindividually.
Standard Settings
The following settings cannot be changed:
•Safety belt minder. You cannot disablethis feature. The audio system will mutewhen this feature is activated.
•Low fuel level warning. When the fuellevel is low, warnings will be shown inthe display followed by an audible tone.
•Driver assist features, for examplenavigation and parking aids. Thesesystems turn on automaticallywhenever you switch the ignition on.
Optional Settings
You can configure MyKey settings when youfirst create a MyKey. You can also changethe settings afterward with an admin key.
The following settings can be configuredusing an admin key:
•Various vehicle speed limits can be set.Warnings will be shown in the displayfollowed by an audible tone when yourvehicle reaches the set speed. Youcannot override the set speed by fullydepressing the accelerator pedal.
•Various vehicle speed reminders can beset. Warnings will be shown in thedisplay followed by an audible tonewhen the set vehicle speed is exceeded.
•Audio system maximum volume of45%. A message will be shown in thedisplay when you attempt to exceedthe limited volume. Automatic volumecontrol will be disabled.
•Always on setting. When this is selectedyou will not be able to disableemergency assistance or the do notdisturb feature.
Vehicles with Keyless Entry
If a MyKey and an admin key are present,your vehicle will recognize the admin keyonly.
MYKEY TROUBLESHOOTING
All Vehicles
Potential CausesCondition
The key used to start the vehicle is not an admin key.The key used to start the vehicle is the only key. Therealways has to be at least one admin key.
I cannot create a MyKey.
The key used to start the vehicle is not an admin key.There are no MyKeys programmed to your vehicle.I cannot program the config-urable settings.
The key used to start the vehicle is not an admin key.There are no MyKeys programmed to your vehicle.I cannot clear the MyKeys.
Purchase a new key from an authorized dealer.I lost the only admin key.
Program a spare key.I lost a key.
The MyKey is not being used by the intended user.The MyKeys have been cleared.The MyKey distance doesnot accumulate.
3B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing

Downloaded from www.Manualslib.com manuals search engine Vehicles With Push Button Start
Potential CausesCondition
The key is not in the backup position.I cannot create a MyKey.
An admin key is present when you switch the ignition on.There are no MyKeys programmed to your vehicle.There are no MyKey drivingmodes.
LOCKING AND UNLOCKING
UnlockA
LockB
LiftgateC
Double Locking With the RemoteControl
Press button B twice within three seconds.
Liftgate
Press button C twice within three seconds.
Power Door Locks
•Press the power door lock button on theinstrument panel once. The doors willlock.
•Press the button again. The doors willunlock.
SLIDING DOOR
When the rear doors are fully open, makesure that you do not step on the cable ormechanism at the base of the dooraperture.
KEYLESS ENTRY
Locking Your Vehicle
Locking buttons are located on each of thefront doors.
4B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing

Downloaded from www.Manualslib.com manuals search engine Global Opening
To open all the windows:
1.Press and release the remote controlunlock button.
2.Press and hold the remote controlunlock button for at least three seconds.
Global Closing
To close all the windows, pressand hold the remote control lockbutton for at least three seconds.
Vehicles With Keyless Entry
Global Opening and Closing
To open or close all the windows, press andhold the driver door handle for at least threeseconds.
CLOCK
Type 1
To adjust the clock, switch the ignition onand press buttons H or M on the informationand entertainment display as necessary.
Type 2
Note:Use the information display to adjustthe clock.
TRIP COMPUTER
Press the button to scroll through thedisplays.
You can reset the trip, averagefuel consumption and averagespeed. Scroll to the requireddisplay, then press and hold the button.
The trip computer includes the followinginformation displays:
Trip Odometer
Registers the distance traveledof individual journeys.
Distance to Empty
Indicates the approximatedistance your vehicle will travelon the fuel remaining in the tank.Changes in driving pattern may cause thevalue to vary.
Average Fuel Consumption
Indicates the average fuelconsumption since the functionwas last reset.
Instantaneous Fuel Consumption
Indicates the current fuelconsumption.
6B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing

Downloaded from www.Manualslib.com manuals search engine MANUAL SEATS
Moving the Seat Backward andForward
Adjusting the Lumbar Support
Adjusting the Height of the Driver’sSeat
Recline Adjustment
STARTING AND STOPPING THE
ENGINE - 1.0L ECOBOOST™
Our range of three-cylinder engines sounddifferent to the four-cylinder engine thatyou may have become used to. It may takea little time for you to get used to thisdifferent sound.
STARTING THE ENGINE
Vehicles With ManualTransmission
Note:Do not touch the accelerator pedal.
Note:Releasing the clutch pedal while theengine is starting will stop the enginecranking and return to ignition on.
1.Fully depress the clutch pedal.
Note:Vehicles with push button start: Brieflypress the button.
2.Start the engine.
Vehicles With AutomaticTransmission
Note:Do not touch the accelerator pedal.
Note:Releasing the brake pedal while theengine is starting will stop the enginecranking and return to ignition on.
1.Move the transmission selector lever toposition P or N.
2.Fully depress the brake pedal.
9B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing

Downloaded from www.Manualslib.com manuals search engine Note:Vehicles with push button start: Brieflypress the button.
3.Start the engine.
Vehicles With a Diesel Engine
Note:Engine cranking will not commenceuntil the engine glow plug indicator hasextinguished. This may take several secondsin extremely cold conditions.
Stopping the Engine When YourVehicle is Moving - Vehicles WithPush Button Start
1.Press and hold the button for at leastone second or press it three times withintwo seconds.
2.Move the transmission selector lever toposition N and use the brakes to bringyour vehicle to a safe stop.
3.When your vehicle has stopped, movethe transmission selector lever toposition P or N and switch the ignitionoff.
AUTO-START-STOP
Using Start-Stop
Note:The system is on by default. To switchthe system off, press the switch in theinstrument panel. The system will only beswitched off for the current ignition cycle. Toturn it on, press the switch again.
To stop the engine
1.Stop your vehicle.
2.Move the gear lever to the neutralposition.
3.Release the clutch pedal.
4.Release the accelerator pedal.
The system may not shut down the engineunder certain conditions, for example:
•To maintain the interior climate.
•Low battery voltage.
•The outside temperature is too low ortoo high.
•The driver's door has been opened.
•Low engine operating temperature.
•Low brake system vacuum.
•If a road speed of 3 mph (5 km/h) hasnot been exceeded.
•The driver's safety belt has not beenfastened.
To re-start the engine
Note:The gear lever must be in the neutralposition.
Depress the clutch pedal.
The system may automatically restart theengine under certain conditions, forexample:
•Low battery voltage.
•To maintain the interior climate.
REFUELING
1.Press the flap to open it. Open the flapfully until it engages.
10B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing