headlamp FORD C MAX HYBRID 2013 2.G Quick Reference Guide

Folding the rear
seatB acK
To Fold the Rear Seat Back
1. Fold the outboard head restraints and
lower the center head restraint.
2. Pull the lever up to fold the
seatback forward.
3. To unfold the seatback, simply pull
up on the seatback to raise it to the
upright position.
comfort
dual cliMate controls
With the dual climate controls, you have the flexibility
to operate the temperature with one control, called
mono mode, or two, where both driver and front
passenger can select independent temperatures
using their own rotary dials.
To operate the dual temperature control: Use the
rotary control on the passenger’s side. Mono mode
automatically shuts off.
To return back to mono mode: Press and hold the
aUTo button. The passenger’s side temperature
automatically adjusts to the driver’s side temperature
setting, and both sides will then remain linked to the
driver’s control.
2
1
panel rooF With sunshade*
The sun shade controls are located on the overhead console. The sun shade has
a one-touch open and close feature. To stop motion during one-touch operation,
press the control a second time.
Opening and Closing the Sun Shade
Fully press and release the front of the control to open the sun shade. Fully press
and release the rear of the control to close the sun shade. For more complete
information, see the Windows and Mirrors chapter of your Owner’s Manual.
tilting Front-ro W head restraints*
The front head restraints may have a tilting feature for extra comfort.
To Tilt the Head Restraint, Do the Following
1. Adjust the seatback to an upright
driving or riding position.
2. Pivot the head restraint forward
toward your head to the desired
position. After the head restraint
reaches the forward-most position,
pivot it forward again to release it
to the rearward, un-tilted position.
aMBient lighting*
Illuminate the interior with a choice of several colors by using
the ambient lighting feature. The ambient lighting controls are
located in the overhead console.
Color Palette: Press to cycle through the various color choices.
Control Knob: Turn the knob past the first detent to switch
ambient lighting on and adjust the brightness.
Search Mode: Press to switch on all interior lamps and ambient
lighting. Press again to turn the interior lamps off.
The ambient lighting switches on when you switch the ignition
and the headlamps on.
The ambient lighting will remain on until you switch the ignition
off and either lock your vehicle, or allow the accessory delay
timer to expire.
17
16
*if equipped
*if equipped
interior laMps
The lamps will switch on when you open any door, press a remote
control button or press on the overhead control.
Press
to disable the interior lamps when you open any door. The
door function indicator “lamp will illuminate yellow.
Press
again to turn the
interior lamps back on.
The indicator lamp will
illuminate blue.
Press
to switch all
lamps on and off.