fuse box FORD CONTOUR 1996 2.G Owners Manual

Servicing Your Contour
235
% [SV33101(ALL)01/95]
Fuses, Circuit Breakers and Relays
[SV33200(ALL)05/94]
Fuses, circuit breakers, and relays protect your vehicle's
electrical system from overloading. If electrical parts in your
vehicle are not working, the system may have been overloaded
and blown a fuse or relay, or tripped a circuit breaker. Before
you replace or repair any electrical parts, check the appropriate
circuit protector.
[SV33400(ALL)05/94]
The following charts tell you which circuit protector protects
each electrical part of your vehicle. If a fuse blows or a circuit
breaker opens a circuit, all the parts of your vehicle that use the
circuit will not work.
*
[SV33410(ALL)06/95]
Once you have determined which fuses or circuit breakers to
check, follow the procedures underChecking and replacing fuses
orChecking and replacing circuit breakerslater in this chapter.
*
[SV33500(ALL)05/95]
RWARNING
Always remove the key from the ignition before working
on or replacing fuses.
[SV33600(ALL)01/95]
The Power Distribution Box Fuses and Relays
[SV33710(ALL)02/94]
10-1/2 pica
art:0001227-A
The power distribution box location
File:cdsvo.ex
Update:Thu Jan 25 12:09:28 1996

236
[SV33713(ALL)02/94]
24 pica art:0001228-A
The power distribution box fuses and relays
[SV33800(ALL)09/94]
Spare fuses are located in the power distribution box under the
hood.
File:cdsvo.ex
Update:Thu Jan 25 12:09:28 1996

242
[SV34401(ALL)01/95]
Relays Outside the Fuse Boxes
[SV34501(ALL)04/94]
sixteen pica
chart:0001229-A%*
[SV35200(ALL)06/95]
Checking and Replacing Fuses
[SV35301(ALL)04/94]1.
Use the charts to decide which fuse you should check.
[SV35311(ALL)02/94]2.
On the fuse panel decal located on the cover of the power
distribution box or on the end of the instrument panel fuse
panel, find the number of the fuse you want to check.
[SV35351(ALL)02/94]3.
Find the corresponding fuse and remove it with the fuse
pulling tool that is provided.
[SV35370(ALL)11/92]4.
Check the fuse to see if it is blown. Look through the clear
side of the fuse to see if the metal wire inside is separated. If
it is, the fuse should be replaced.
[SV35390(ALL)02/93]5.
Replace the fuse with one that has the right amperage rating.
See the following chart.
File:cdsvo.ex
Update:Thu Jan 25 12:09:28 1996