trunk release FORD CROWN VICTORIA 2000 2.G Owners Manual

FORD CROWN VICTORIA 2000 2.G Owners Manual CROWN VICTORIA 2000 2.G FORD FORD https://www.carmanualsonline.info/img/11/4776/w960_4776-0.png FORD CROWN VICTORIA 2000 2.G Owners Manual

Page 76 of 224

FORD CROWN VICTORIA 2000 2.G Owners Manual 2. Press and hold the COMP side of
the control for approximately six
seconds until “C” appears in the
mirror display.
3. Drive the vehicle slowly (less
than 5 km/h [3 mph]) in circles or
on your e

Page 89 of 224

FORD CROWN VICTORIA 2000 2.G Owners Manual Erasing personal code
To erase all of the personal entry codes programmed to a vehicle:
1. Enter the factory-set code.
2. Press 1/2 within 5 seconds of
step 1.
3. Press and hold 1/2 for two
seconds. A

Page 90 of 224

FORD CROWN VICTORIA 2000 2.G Owners Manual Locking doors with the keyless entry system
It is not necessary to enter the factory-set code prior to locking all doors.
To lock the doors:
Press 7/8 and 9/0 at the same time.
INTERIOR LUGGAGE COMPAR

Page 143 of 224

FORD CROWN VICTORIA 2000 2.G Owners Manual The high-current fuses are coded as follows.
Fuse/Relay
LocationFuse Amp
RatingPower Distribution Box Description
1 20A* Electric Fuel Pump Relay
2 30A* Generator, Starter Relay, Fuses 15 and 18
3 25A

Page 223 of 224

FORD CROWN VICTORIA 2000 2.G Owners Manual Specification chart,
lubricants ............................202,204
Speed control ..............................66
Speedometer ...............................16
Starting your vehicle .........118,120