light FORD E SERIES 2006 4.G Workshop Manual

FORD E SERIES 2006 4.G Workshop Manual E SERIES 2006 4.G FORD FORD https://www.carmanualsonline.info/img/11/4808/w960_4808-0.png FORD E SERIES 2006 4.G Workshop Manual

Page 155 of 248

FORD E SERIES 2006 4.G Workshop Manual aftermarket PTO installer since the duration of operation limit for the
aftermarket PTO may be less than 10 minutes.
A more complete description of PTO operation is discussed in the Ford
Truck Body Bu

Page 162 of 248

FORD E SERIES 2006 4.G Workshop Manual Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse
Panel Description
8 30A Radio capacitor(s), Ignition coil,
Powertrain Control Module (PCM)
diode, PCM power relay
9 5A Wiper control module

Page 165 of 248

FORD E SERIES 2006 4.G Workshop Manual Fuse/Relay
LocationFuse Amp
RatingPower Distribution Box
Description
13 20A** Fuel pump relay
14 50A** Auxiliary blower relay
15 30A** Main light switch
16 20A** Injectors (gasoline engines)
17 50A**

Page 177 of 248

FORD E SERIES 2006 4.G Workshop Manual 4. Check all battery terminals and remove any excessive corrosion before
you attach the battery cables. Ensure that vent caps are tight and level.
5. Turn the heater fan on in both vehicles to protect

Page 179 of 248

FORD E SERIES 2006 4.G Workshop Manual Removing the jumper cables
Remove the jumper cables in the reverse order that they were
connected.
1. Remove the jumper cable from thegroundmetal surface.
Note:In the illustrations,lightning boltsare

Page 185 of 248

FORD E SERIES 2006 4.G Workshop Manual THE DISPUTE SETTLEMENT BOARD (U.S. ONLY)
The Dispute Settlement Board is:
•an independent, third-party arbitration program for warranty disputes.
•available free to owners and lessees of qualifyin

Page 188 of 248

FORD E SERIES 2006 4.G Workshop Manual UTILIZING THE MEDIATION/ARBITRATION PROGRAM
(CANADA ONLY)
For vehicles delivered to authorized Canadian dealerships. In those cases
where you continue to feel that the efforts by Ford of Canada and th

Page 191 of 248

FORD E SERIES 2006 4.G Workshop Manual WASHING THE EXTERIOR
Wash your vehicle regularly with cool or lukewarm water and a neutral
pH shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is
available from your dealer.
•
Never use str

Page 193 of 248

FORD E SERIES 2006 4.G Workshop Manual •Do not spray a hot engine with cold water to avoid cracking the
engine block or other engine components.
•Spray Motorcraft Engine Shampoo and Degreaser (ZC-20) on all parts
that require cleaning

Page 194 of 248

FORD E SERIES 2006 4.G Workshop Manual •Do not use abrasives, as they may cause scratches.
•Do not use fuel, kerosene, or paint thinner to clean any parts.
•Wiper blades can be cleaned with isopropyl (rubbing) alcohol or
windshield w