maintenance FORD E SERIES 2008 4.G Workshop Manual

FORD E SERIES 2008 4.G Workshop Manual E SERIES 2008 4.G FORD FORD https://www.carmanualsonline.info/img/11/4812/w960_4812-0.png FORD E SERIES 2008 4.G Workshop Manual

Page 263 of 280

FORD E SERIES 2008 4.G Workshop Manual MOTORCRAFT PART NUMBERS
Component14.6L V8 engine5.4L V8
engine6.8L V10
engine
Air filter element FA-1632 FA-1632 FA-1632
Battery- standard /
(auxiliary)BXT-65-650 /
(BXT-65-750)BXT-65-650 /
(BXT-65-75

Page 264 of 280

FORD E SERIES 2008 4.G Workshop Manual MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES
Item Capacity Ford part nameFord part number /
Ford specification
Brake fluidBetween MIN
and MAX on
reservoirMotorcraft High
Performance DOT 3
Motor V

Page 265 of 280

FORD E SERIES 2008 4.G Workshop Manual Item Capacity Ford part nameFord part number /
Ford specification
Cooling system stop leak pellets —Motorcraft Cooling
System Stop Leak
PelletsVC-6 /
WSS-M99B37-B6
Engine oil 6.0 quarts (5.7L)Motorc

Page 266 of 280

FORD E SERIES 2008 4.G Workshop Manual Item Capacity Ford part nameFord part number /
Ford specification
Dana Limited Slip Axle fluid
M60 (M248)
E250/E3505.9 pints
(2.8L)
5,7
SAE 90 Hypoid Gear
OilXY–90–GL /
ESW-M2C105-E Dana Limited S

Page 267 of 280

FORD E SERIES 2008 4.G Workshop Manual Item Capacity Ford part nameFord part number /
Ford specification
Fuel tank–all regular and extended
length vans and wagons35.0 gallons
(132.4L)
—— Fuel tank–138 inch wheelbase
(except E-Super

Page 268 of 280

FORD E SERIES 2008 4.G Workshop Manual ENGINE DATA
Engine*4.6L V8
engine5.4L V8
engine6.8L V10 engine
Cubic inches 281 330 415
Required fuel 87 octane 87 octane 87 octane
Firing order 1-3-7-2-6-5-4-8 1-3-7-2-6-5-4-8 1-6-5-10-2-7-3-8-4-9
Ig

Page 269 of 280

FORD E SERIES 2008 4.G Workshop Manual •4.6L V8 and 5.4L V8 Engines with A/C
•6.8L V10 Engine
VEHICLE IDENTIFICATION NUMBER
Complete Ford built vehicles
The vehicle identification number is attached to your vehicle in the
following pla

Page 270 of 280

FORD E SERIES 2008 4.G Workshop Manual •On the certification label. This
label is required by the National
Highway Traffic Safety
Administration and is made of
special material. If it is tampered
with, it will be destroyed or a
destructi

Page 271 of 280

FORD E SERIES 2008 4.G Workshop Manual TRANSMISSION/TRANSAXLE CODE DESIGNATIONS
You can find a
transmission/transaxle code on the
Safety Compliance Certification
Label. The following table tells you
which transmission or transaxle
each cod

Page 274 of 280

FORD E SERIES 2008 4.G Workshop Manual A
Accessory delay ..........................52
AdvanceTrac ..............................168
Air cleaner filter ...............261–263
Airbag supplemental restraint
system ..........................