heating FORD EDGE 2008 1.G User Guide

FORD EDGE 2008 1.G User Guide EDGE 2008 1.G FORD FORD https://www.carmanualsonline.info/img/11/4832/w960_4832-0.png FORD EDGE 2008 1.G User Guide

Page 250 of 336

FORD EDGE 2008 1.G User Guide Do not drive your AWD vehicle in deep sand for an extended period of
time. This will cause the AWD system to overheat. If the rear tires stop
spinning while the front tires spin in deep sand, turn off

Page 251 of 336

FORD EDGE 2008 1.G User Guide “Tread Lightly” is an educational
program designed to increase public
awareness of land-use regulations
and responsibilities in our nations
wilderness areas. Ford Motor
Company joins the U.S. Fore

Page 303 of 336

FORD EDGE 2008 1.G User Guide •Refer toscheduled maintenance informationfor service interval
schedules.
•Be sure to read and understandPrecautions when servicing your
vehiclein this chapter.
If the engine coolant has not been

Page 304 of 336

FORD EDGE 2008 1.G User Guide •A large amount of water without engine coolant may be added, in case
of emergency, to reach a vehicle service location. In this instance, the
cooling system must be drained and refilled with a 50/5

Page 305 of 336

FORD EDGE 2008 1.G User Guide 6. Replace the cap. Turn until tightly installed. Cap must be tightly
installed to prevent coolant loss.
After any coolant has been added, check the coolant concentration (refer
toChecking engine cool

Page 321 of 336

FORD EDGE 2008 1.G User Guide The transmission fluid should be
within the cross-hatch area if at
normal operating temperature 149°F
(65°C).
High fluid level
Fluid levels above the safe range
may result in transaxle failure. An
o

Page 332 of 336

FORD EDGE 2008 1.G User Guide instrument panel ....................289
interior .....................................290
plastic parts ............................287
safety belts ..............................290
washing ........

Page 333 of 336

FORD EDGE 2008 1.G User Guide dipstick ....................................296
filter, specifications ........299, 323
recommendations ...................299
refill capacities ........................324
specifications ...........
Page:   < prev 1-10 11-20