seat memory FORD ESCAPE 2014 3.G Quick Reference Guide

Comfort continued
*if equipped
Memory Function*
The memory function allows a “one-touch”
recall of personalized memory features like
the positions of the driver seat and power
mirrors. Use the memory controls located on
the driver’s door to program and then recall
memory positions.
To program position 1, press and hold the 1 button until you
hear a tone. Use this same procedure to set positions 2
and 3 using the respective buttons. You can now use these
controls to recall the set memory positions.
Tilting Front-row Head Restraints
Tilt the head restraint forward for additional comfort by
gently pulling the top of the head restraint. Once it is in the
forward-most position, tilting it forward once more will
release it to the upright position.
Note: Do not attempt to
force the head restraint
backward after it is tilted.
Instead, continue tilting
it forward until the head
restraint releases to the
upright position.
Comfort
*if equipped18
Ambient Lighting*
Illuminate the interior with a choice of several colors by
using the ambient lighting feature. The ambient lighting
controls are located on the overhead console.

Color Palette – Press to cycle through the various
color choices.

Control Knob – Turn the knob past the first detent to
switch ambient lighting on and adjust the brightness.

Search Mode – Press to switch on all interior lamps
and ambient lighting. Press again to turn the interior
lamps off.
The ambient lighting switches on when you switch the
ignition and the headlamps on.
The ambient lighting will remain on until you switch
the ignition off and either lock your vehicle, or allow the
accessory delay timer to expire.
Heated Front Seats*
The front heated seat
controls are located on the
center console near the
gearshift lever. Rotate the
dial to select your preferred
heat mode.
Rear Reclining Seats*
Pull the lever up to recline
the seatback to the desired
position. Pull the lever
up to fold the seatback
forward. You may need to
fold the outboard head
restraints and lower the
center head restraint first.
Cargo Storage *
You can store additional
items in the cargo space
located underneath the
front passenger seat. You
can reach the space from
the second row.
A cargo storage
compartment is located
underneath the load floor
in the rear of the vehicle.
Lift the release handle to
open it. Vehicles with the
standard sized spare tire
can adjust the load floor to
two positions: high or low.
There are four tie-down
anchors in the rear cargo
area (one in each corner)
to help secure objects.
19
Panoramic Vista Roof® and Power Sunshades*
The moonroof and sunshade controls are located on
the overhead console. Both controls have a “one-touch”
opening and closing operation. Press and release the
rear of the sunshade control to open the sunshade.
Press and release the front of the sunshade control to
close the sunshade (if the moonroof is open it will close
automatically prior to the sunshade). Press and release
the rear of the moonroof control to open the sunshade
and glass panel. Press and release the front of the
moonroof control to close the glass panel.