service interval FORD ESCAPE 2014 3.G Quick Reference Guide
[x] Cancel search | Manufacturer: FORD, Model Year: 2014, Model line: ESCAPE, Model: FORD ESCAPE 2014 3.GPages: 10, PDF Size: 1.91 MB
Page 3 of 10

Instrument Panel
1
3
2
4
5
6
7
45
9
1 Cruise Control
To Set Your Cruise
Control Speed
1. Press and release ON.
2. Accelerate to the
desired speed.
3. Press and release SET +,
then take your foot off
the accelerator.
After your speed has been
set, you can press SET +/-
to adjust your cruise speed.
To disable, pull the CAN
(Cancel) control toward you
or tap the brake pedal.
2 Service Engine
Soon Light
Illuminates briefly
when the ignition is turned
on. If it remains on or is
blinking after the engine
is started, the On-Board
Diagnostics (OBD-II) system
has detected a malfunction.
Drive in a moderate fashion
and contact your authorized
dealer as soon as possible.
3 Information Display
Provides information about
various systems on your
vehicle. Use the left, 5-way
controls located on the
steering wheel to choose
and confirm settings and
messages. Refer to the
Information Displays chapter
of your Owner’s Manual for
more information.
4 Tilt/Telescope
Steering Column
Unlock the steering wheel by
pulling the lever down. Adjust
the wheel to the desired
position (in/out, up/down).
Push the lever back up to lock
the steering wheel in place.
5 Media Controls*
Use the right, 5-way controls
to adjust entertainment
settings such as volume, seek
and mode. Highlight and
make selections, then press
OK to confirm your selection.
6 Voice Controls*
Pull toward you to access
voice recognition.
Press the phone button to
answer an incoming call.
Press and hold to exit
phone mode or end a call.
Press the home icon at
any time to return to your
MyFord Touch
® home screen.
Press the information
icon to access MyFord Touch
SYNC Services*, SIRIUS
®
Travel LinkTM, Alerts, Calender
and SYNC Apps.
7 Wiper Controls
Use the rotary control on
the stalk to adjust the wipe
intervals. Pull the stalk
toward you to spray and
wash the windshield.
8 Push-button Start*
Allows you to start your
vehicle by pressing the
ENGINE START/STOP
button while fully pressing
down on the brake pedal.
Press the button again to
turn the engine off.
Note: Your intelligent access
key * must be inside the
vehicle to start the ignition.
9 Hazard Control
*if equipped
8