trunk FORD ESCORT 1997 7.G Owners Manual

TRUNK/LIFTGATE CONTROLS
Compact disc changer (if
equipped)
For information on compact disc
changer, refer to theAudio Guide.
Wagon liftgate lamp
Press the switch to turn the
liftgate lamp on or off.
ON OFF
Controls and features
40

REMOTE ENTRY AND
ANTI-THEFT SYSTEM
²Sedan
²Wagon
Remote entry system (if
equipped)
The remote entry system is
available as a driver-door only or
as an all-door system. The remote
entry features only operate with
the ignition in the OFF position.
When the ignition is in ON or ACC,
the system is disarmed. If the
vehicle is left running and locked,
the system will not allow reentry
using the remote entry transmitter.
The operating range of the remote
entry system may be affected by
weather conditions (such as very
UN
LOCK
LOCK
TRUNK
PANIC
UN
LOCK
LOCK
PANIC
Controls and features
45

cold temperatures) or structures
around the vehicle (buildings,
other vehicles, radio and TV
towers, etc.). Typical operating
range will allow you to be up to 10
meters (33 ft) away from your
vehicle.
Unlocking the doors and wagon
liftgate
Driver-door only system
²Press once to unlock the driver
side door.
²Press again within five seconds
to unlock the wagon liftgate (if
equipped)
²Sedan
²Wagon
All-door system
²Press once to unlock the driver
side door.
UN
LOCK
LOCK
PANIC
UN
LOCKLOCK
TRUNK
PANIC
Controls and features
46

²Press again within five seconds
to unlock passenger doors and
wagon liftgate (if equipped).
Opening the trunk (if equipped)
Press once to open the trunk.
²Sedan
Locking the doors
Driver-door only system
²Press once to lock only the
driver's door.
²Press again within five seconds
to verify system has attempted
to lock the door (horn will
sound once and parking lamps
will flash).
The remote opens and locks the
driver's door only, it will not
activate the other three doors.
A bright yellow key fob and
``DRIVER'S DOOR ONLY'' label are
provided with your remote entry
system. They provide an additional
reminder that the remote entry
system locks and unlocks only the
driver's door.
If the other doors are unlocked,
they will remain unlocked even
after the system has locked the
UN
LOCK
LOCK
TRUNK
PANIC
Controls and features
47

driver's door. The other doors must
be locked manually.
²Sedan
²Wagon
All-door system
²Press once to lock all doors.
²Press again within five seconds
to verify doors are locked (horn
will sound once and parking
lamps will flash).
If a door is ajar, the horn will
sound twice when the LOCK
button is pressed a second time
with the all-door system.
UN
LOCK
LOCK
PANIC
UN
LOCKLOCK
TRUNK
PANIC
Controls and features
48

Sounding a panic alarm
Press once to sound an alarm
(with either the driver-door only or
all-door system).
²Sedan
²Wagon
The parking lamps flash, the horn
sounds, and the illuminated entry
system turns on.
Press a second time to turn off the
alarm.
Illuminated entry
Interior lamps illuminate when the
UNLOCK button is pressed on the
remote entry transmitter (if
equipped). The illuminated entry
function illuminates the interior
overhead lamp for approximately
20 seconds, until the key is
inserted into the ignition and
turned to ON, or until the LOCK
button is pressed on the remote
entry transmitter. The interior
overhead lamp must be set to the
DOOR position in order for the
UN
LOCK
LOCK
PANIC
UN
LOCKLOCK
TRUNK
PANIC
Controls and features
49

Press once to arm the anti-theft
system.
The THEFT light in the instrument
cluster illuminates until the arming
procedure is complete. After the
arming procedure is complete, the
THEFT light flashes.
Disarming an untriggered
system
Press once to disarm the
untriggered anti-theft system.
If the driver armed the system but
did not exit the vehicle, the system
can also be disarmed by inserting
the key and turning the ignition to
ON.
The system will not disarm by
using the key in any door/trunk
lock cylinder.
UN
LOCK
LOCK
PANIC
UN
LOCKLOCK
TRUNK
PANIC
UN
LOCK
LOCK
PANIC
UN
LOCKLOCK
TRUNK
PANIC
Controls and features
51

Disarming a triggered system
Press either the UNLOCK or
PANIC button to disarm a
triggered anti-theft system.
A triggered system can also be
disarmed by inserting the key and
turning the ignition to ON.
This device complies with Part 15
of the FCC rules. Operation is
subject to the two following
conditions: (1) this device may not
cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
Replacement batteries for the
remote entry and/or anti-theft
system transmitters can be
purchased at pharmacies, watch
stores, or at authorized dealers.
If a transmitter is lost, a new one
may be programmed by your
dealer. Take any remaining
transmitters with you to the dealer
so they may be reprogrammed.
The system will work with up to
four transmitters. Your vehicle
comes equipped with two
transmitters; additional
transmitters can be ordered from
your dealer. It will be necessary to
have all of the transmitters
programmed to the remote entry
system by the dealer at the same
time.
UN
LOCK
LOCK
PANIC
UN
LOCKLOCK
TRUNK
PANIC
Controls and features
52

USING THE HAZARD SWITCH
Use the hazard flashers to warn
traffic of vehicle problems:
²Slide the hazard switch to the
right to activate the hazard
flashers.
²Slide the hazard switch to the
left to deactivate the
continuously blinking flashers.
RESETTING THE FUEL PUMP
SHUT-OFF SWITCH
The fuel pump shut-off switch
stops the fuel pump when the
vehicle has been involved in a
collision or major jolt. If the
vehicle does not start, it is possible
that the fuel pump shut-off switch
needs to be reset.
If you see or smell fuel, do
not reset the switch or try
to start your vehicle. Have all
passengers get out of the vehicle
and call the local fire department
or a towing service.
To reset the fuel pump, press the
button on the switch. The switch is
located immediately below the hole
in the trunk side trim.
Roadside emergencies
107

Tail lamps / Backup lamps
(sedan)
The tail lamp assemblies and the
backup bulb assemblies are located
in the same portion of the vehicle
rear, one just below the other.
Follow the same steps to replace
either bulb.
1. Open the trunk lid to expose the
tail lamp assembly. Remove the
two screws from the front of the
lamp.
2. The tail lamp has hidden
fasteners which can be disengaged
by hitting the lamp, with your
hand, toward the side of the
vehicle.
3. Remove the socket that contains
the burned out bulb by rotating it
counterclockwise, then pulling it
out of the lamp assembly.
4. Pull the burned out bulb from
the socket and replace it with a
new bulb.
Maintenance and care
167