manual transmission FORD ESCORT 2001 6.G Workshop Manual

Downloaded from www.Manualslib.com manuals search engine
10. Remove the (A) nut and the (B) clip; disconnect the shift cable from the bracket and set aside.

11. Remove the nut and the clip; disconnect the shif t cable from the bracket and set aside.

12. Remove the constant control relay module (CCRM).
1. Disconnect the CCRM
2. Remove the two bolts, the CCRM, and the bracket.

13. Disconnect the (A) EGR backpressure transducer e lectrical connector, disconnect the (B) two vacuum hoses, and remove the (C) two nuts and the transduc er.

14. Disconnect the (A) transmission range sensor ele ctrical connector, the (B) transaxle solenoid electrical connector, and the (C) turbine speed sensor e lectrical connector.
102001 Escort Workshop Manual
6/27/2010http://www.fordtechservice.dealerconnection.com/pub s/content/~WS1F/~MUS~LEN/19/S...

Downloaded from www.Manualslib.com manuals search engine
53. Attach the Engine Lifting Bracket on the left re ar side of the cylinder head.

54. Install the Engine Support Bar as shown.

55. Raise and support the vehicle. For additional in formation, refer to
Section 100-02.
56. Remove the transaxle support crossmember. 1. Remove the two crossmember nuts and the two cross member bolts.
2. Remove the two LH front engine support insulator (6038) nuts.
3. Remove the two transmission support insulator (60 68) nuts.

57. Lower the vehicle.
58. Remove the four nuts and the transaxle mount.
102001 Escort Workshop Manual
6/27/2010http://www.fordtechservice.dealerconnection.com/pub s/content/~WS1F/~MUS~LEN/19/S...