belt FORD EXPEDITION 2015 3.G Quick Reference Guide

COMFORT (CONTINUED)
AMBIENT LIGHTING*
When activated, ambient lighting illuminates key areas of your
interior with a choice of colors.
To access and make adjustments
1. Press the Settings icon > Vehicle > Ambient Lighting.
2. Touch the desired color.
3. Use the scroll bar to increase or decrease the intensity.
To turn the feature on or off, press the power button.
REAR HEATED SEATS*
Press the heated seat control repeatedly to cycle through the
settings and off. More lights indicate a higher setting.
MEMORY FEATURE*
The memory function saves and recalls the positions of the driver
seat, power mirrors and adjustable pedals. Use the memory
controls located on the left side of the driver’s seat
to
program and then recall memory positions.
To program
1. Switch on the ignition.
2. Move the memory features to your desired position.
3. Press and hold the 1 button
until you hear a tone.
Use this same procedure to set the second position using the
2 button
.
You can now use these controls to recall the set
memory positions.
COMFORT (CONTINUED)
POWERFOLD® THIRD-ROW SEAT*
The 60/40 split-folding bench seat uses
a power-activated seatback release. Fold
one side or both down for more flexibility.
The controls are located on the right-hand
rear quarter trim panel that is accessible
from the liftgate area.
Note: Make sure you unfasten all of the
safety belts.
To lower
1. Make sure you fold the head restraints
down first.
2. Press and hold the FOLD control.
Release the control once the seats
fold completely.
3. To return the seatback to its original
position, press and hold the UP control.
Release the control once the seats return
to the upright position. Note: The power-folding seats operate for
10 minutes after you switch the ignition off.
The transmission must be in park (P) and
the liftgate or liftgate glass must be open.
LEATHER CLEANING
For cleaning and removing spots and
stains, use Motorcraft® Premium Leather
and Vinyl Cleaner** or a commercially
available leather cleaning product for
automotive interiors.
Note: Test any cleaning product on an
inconspicuous area first.
Do not use the following products as these
may damage the leather:
• Oil and petroleum or silicone-based
leather conditioners.
• Household cleaners.
• Alcohol solutions.
• Solvents or cleaners intended
specifically for rubber, vinyl
and plastics.
For complete information, see the Vehicle
Care chapter of your Owner’s Manual.
MOONROOF*
The moonroof control is on the overhead
console. It has a one-touch open and
close feature. To stop its motion during the
one-touch operation, press the control a
second time.
To open, press and release the SLIDE
control. It stops short of the fully opened
position to help reduce wind noise. Press
the SLIDE control again to fully open the
moonroof. To close, pull and release the
SLIDE control.
To vent, press and release the TILT control.
Pull and hold the TILT control to close
the moonroof.
Once you close the moonroof, you can still
open or close the sliding shade manually.
Pull the shade toward the front of the
vehicle to close it.
page 17 page 16*if equipped
**Do not use on the King Ranch seats. See the Vehicle Care Owner’s Manual for details. *if equipped