seat adjustment FORD EXPEDITION 2015 3.G Quick Reference Guide

INSTRUMENT PANEL (CONTINUED)
12 A. POWER LIFTGATE CONTROL* lets you open or
close your power liftgate from the driver seat. To use,
press the control.
B. HILL START ASSIST keeps your vehicle stationary
long enough to move your foot from the brake pedal to
the accelerator pedal when your vehicle is on a slope.
Press the control to switch this feature off. It turns back
on automatically after you re-start your vehicle.
C. ADVANCETRAC® WITH RSC® (ROLL STABILITY
CONTROL™) automatically activates when you start
your engine and helps you keep control of your vehicle
when on a slippery surface. The electronic stability
control portion of the system helps avoid skids and
lateral slides, while the roll stability control helps avoid a
vehicle rollover. The traction control system helps avoid
drive wheel spin and loss of traction.
TRAILER SWAY CONTROL * applies your vehicle
brakes at individual wheels and, if necessary, reduces
engine power. If the trailer begins to sway, the stability
control light flashes and the message TRAILER SWAY
REDUCE SPEED appears in the information display.
The first thing to do is slow down your vehicle, then
pull safely to the side of the road and check for proper
tongue load and trailer load distribution. For more
information, please refer to the Towing chapter in your
Owner’s Manual.
9 RIGHT VEHICLE INFORMATION DISPLAY* provides
information about Entertainment, Phone, Climate and
Navigation*. Use the right-hand, 5-way controls located on
your steering wheel to scroll through, highlight and make minor
adjustments within a selected menu. For more information,
refer to the MyFord Touch chapter in your
Owner’s Manual.
10 STEERING WHEEL CONTROLS
Press VOL+ or VOL– to increase or decrease your
volume level.
Press
to access the previous or next radio station,
CD track or preset satellite radio channel.
Press OK repeatedly to access all possible media sources.
Press
to access voice recognition*.
Press
to access SYNC® phone features.
Note: Some of your steering wheel media controls may vary.
See the Steering Wheel chapter in your Owner’s Manual for
more details.
11 PUSH BUTTON START* allows you to start your vehicle by
pressing the ENGINE START STOP button while fully pressing
down on the brake pedal. If you leave your vehicle idling for an
extended period of time, it automatically shuts down. Before
the engine shuts down, a message appears in the information
display, allowing the driver to override the shutdown feature.
Press the button again to switch the engine off.
Note: Your intelligent access transmitter must be inside the vehicle for
the ignition to start. Keyless warning alert sounds the horn twice when
you exit the vehicle with the intelligent access transmitter and the
keyless vehicle is on.
page 7page 6
9
11
ABC
13 INTEGRATED TRAILER BRAKE
CONTROLLER* assists in smooth and effective
trailer braking by powering the trailer’s electric or
electric over hydraulic brakes with a proportional
output based on the towing vehicle’s
brake pressure.
Use the GAIN adjustment buttons to increase or
decrease the braking feature’s power output to the
trailer. Adjust the GAIN by:

A. Pressing the GAIN + or GAIN – buttons
to increase or decrease the setting to the
desired starting point. A GAIN setting
of 6.0 is a good starting point for
heavier loads.

B. Testing the adjusted GAIN setting.
1. In a traffic-free environment, tow the
trailer on a dry, level surface at a speed of
20-25 mph (30-40 km/h) and squeeze the
manual control lever completely.
2. If the trailer wheels lock up (the tires will
squeal), reduce the GAIN setting. If the trailer
wheels turn freely, increase the
GAIN setting.
3. The proper GAIN setting will be at the point
just below trailer wheel lock-up. If towing a
heavier trailer, trailer wheel lockup may not
be attainable even with the maximum GAIN
setting of 10.
For more information, please refer to the Towing
chapter in your Owner’s Manual.
12
9
10
13
*if equipped *if equipped

SYNC® WITH MYFORD TOUCH®* (CONTINUED)COMFORT
SEATING-TO-CARGO VERSATILITY
Note: Before folding the second- or third-
row seats, make sure to flip down the head
restraints by pulling on the strap, and remove all
items from the floor and seats.
TO FOLD THE FLAT-FOLDING THIRD-ROW
SEATS TO THE LOAD FLOOR
Pull up on the Handle located behind the
seatback while pushing the seatback forward
and down into the seat cushion.
Note: You may need to exert a moderate force
to move the seat forward and down.
To return the seats to an upright
seating position
Lift and pull the seat rearward until the
latch engages fully.
Pull Strap
Handle
E-Z ENTRY INTO THE
THIRD-ROW SEATS
The E-Z entry seat allows for easier
entry and exit to and from the
third-row seat.
To enter the third-row seating area
1. Fold the head restraint forward.
2. Pull up on Lever 1.
3. Fold down the second-row seat
and release the handle.
4. Pull the handle up again until the
seat releases from the floor.
5. Push the seat upward and fold it
away from the third row.
To return the seat to an upright
seating position
1. Push the seat down and latch it to
the floor.
2. Bring the seatback to an upright
position. It should lock into position.
3. Lift up on the head restraint until it
locks into its original position.

Lever 1
Position 2
Position 3
page 15 page 14*if equipped
CLIMATE
SYNC with MyFord Touch controls the
temperature, airflow direction, fan speed
and other climate features like climate
controlled front seats* and rear climate
control* for you and your passengers.
To use voice commands to operate
climate, say a voice command like “Climate
temperature 72 degrees” and MyFord
Touch will make that adjustment.
SET YOUR MYTEMP
• Touch the lower-right blue corner on
the touchscreen.
• Set your exact, desired temperature
using the (+) or (–) buttons.
• Press and hold the MyTemp button
until the background color goes solid.
ACCESS YOUR REAR CLIMATE CONTROL*
Press the Climate corner of the touchscreen
and then touch the Rear button on the
lower-right corner to activate the rear
climate control. Adjust rear temperature
and fan speed from the touchscreen or
give second-row passengers access to their
independent control.
ENTERTAINMENT
No matter how you store your music, SYNC
makes it yours to enjoy when you’re behind
the wheel. Just press the lower-left red
corner of the touchscreen. From here, you
can easily go between AM/FM, SiriusXM
and other media sources.
SET YOUR RADIO PRESETS
• Touch the lower-left corner
on the touchscreen.
• Touch FM.
• Touch Direct Tune.
• Enter the desired station
and touch Enter.
• Touch Presets and then touch
and hold one of the memory preset
buttons to save it. The sound mutes
and then returns after it saves
the station.
BRING IN YOUR OWN MUSIC
Gain access to any audio source by voice
and even control how each operates, like
changing radio stations, CD tracks or music
on one of the following devices:
• CD
• USB
• Bluetooth
® streaming
• Audio line in
Refer to the MyFord Touch chapter in
your Owner’s Manual, visit the website
or call the toll-free number for more
information. See the inside front cover
of this guide for details.

COMFORT (CONTINUED)
AMBIENT LIGHTING*
When activated, ambient lighting illuminates key areas of your
interior with a choice of colors.
To access and make adjustments
1. Press the Settings icon > Vehicle > Ambient Lighting.
2. Touch the desired color.
3. Use the scroll bar to increase or decrease the intensity.
To turn the feature on or off, press the power button.
REAR HEATED SEATS*
Press the heated seat control repeatedly to cycle through the
settings and off. More lights indicate a higher setting.
MEMORY FEATURE*
The memory function saves and recalls the positions of the driver
seat, power mirrors and adjustable pedals. Use the memory
controls located on the left side of the driver’s seat
to
program and then recall memory positions.
To program
1. Switch on the ignition.
2. Move the memory features to your desired position.
3. Press and hold the 1 button
until you hear a tone.
Use this same procedure to set the second position using the
2 button
.
You can now use these controls to recall the set
memory positions.
COMFORT (CONTINUED)
POWERFOLD® THIRD-ROW SEAT*
The 60/40 split-folding bench seat uses
a power-activated seatback release. Fold
one side or both down for more flexibility.
The controls are located on the right-hand
rear quarter trim panel that is accessible
from the liftgate area.
Note: Make sure you unfasten all of the
safety belts.
To lower
1. Make sure you fold the head restraints
down first.
2. Press and hold the FOLD control.
Release the control once the seats
fold completely.
3. To return the seatback to its original
position, press and hold the UP control.
Release the control once the seats return
to the upright position. Note: The power-folding seats operate for
10 minutes after you switch the ignition off.
The transmission must be in park (P) and
the liftgate or liftgate glass must be open.
LEATHER CLEANING
For cleaning and removing spots and
stains, use Motorcraft® Premium Leather
and Vinyl Cleaner** or a commercially
available leather cleaning product for
automotive interiors.
Note: Test any cleaning product on an
inconspicuous area first.
Do not use the following products as these
may damage the leather:
• Oil and petroleum or silicone-based
leather conditioners.
• Household cleaners.
• Alcohol solutions.
• Solvents or cleaners intended
specifically for rubber, vinyl
and plastics.
For complete information, see the Vehicle
Care chapter of your Owner’s Manual.
MOONROOF*
The moonroof control is on the overhead
console. It has a one-touch open and
close feature. To stop its motion during the
one-touch operation, press the control a
second time.
To open, press and release the SLIDE
control. It stops short of the fully opened
position to help reduce wind noise. Press
the SLIDE control again to fully open the
moonroof. To close, pull and release the
SLIDE control.
To vent, press and release the TILT control.
Pull and hold the TILT control to close
the moonroof.
Once you close the moonroof, you can still
open or close the sliding shade manually.
Pull the shade toward the front of the
vehicle to close it.
page 17 page 16*if equipped
**Do not use on the King Ranch seats. See the Vehicle Care Owner’s Manual for details. *if equipped