seats FORD EXPLORER 1996 2.G User Guide

52
*
[SR15295( X)08/95]
Inspection after a collision
[SR15297( X)10/94]
RWARNING
All built-in child restraints, including seats, buckles,
retractors, seat latches, interlocks, and attaching hardware
should be inspected by a qualified dealer technician after
any collision. If the child seat was in use during a
collision, Ford recommends replacing it. However, if the
collision was minor and a qualified technician finds that
the child restraints do not show damage and continue to
operate properly, they do not need to be replaced.
Built-In Child Seats not in use during a collision should
also be inspected and replaced if either damage or
improper operation is noted.
%*
[SR15300( X)08/95]
Cleaning
[SR15302( X)01/95]
Your built-in child seat may be cleaned with mild soap and
water. Do not use household cleaners as they may weaken the
webbing or damage the plastic parts. For your convenience, the
liner is made to be machine washable and air dried (do not use
heat).
*
[SR15305( X)08/95]
Built-in child seat maintenance
*
[SR15307( X)05/95]
Regularly inspect the lap and shoulder belts system of your
child seat. See your Ford Dealer if the shoulder belt webbing is
frayed, or if the buckle and tongue are damaged and/or do not
function properly.
%*
[SR15900(ALL)01/95]
Safety Seats for Children
*
[SR16000(ALL)05/95]
Use a safety seat that is recommended for the size and weight
of the child. Always follow the safety seat manufacturer's
instructions when installing and using the safety seat.
*
[SR16015(ALL)08/95]
Ford recommends the use of a child safety seat having a top
tether strap. Install the child safety seat in a seating position
which is capable of providing a tether anchorage. For more
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996

Safety Restraints
53 information on top tether straps seeAttaching Safety Seats With
Tether Strapsin this chapter.
*
[SR16025(ALL)08/95]
When installing a child safety seat, be sure to use the correct
safety belt buckle for that seating position, and make sure the
tongue is securely fastened in the buckle. For a shoulder/lap
belt combination with a sliding tongue, make sure the retractor
is in the automatic locking mode.
*
[SR16090(ALL)07/95]
All child restraint systems are designed to be secured in vehicle
seats by lap belts or by the lap portion of a lap-shoulder belt.
*
[SR16100(ALL)06/95]
RWARNING
If you do not properly secure the safety seat, the child
occupying the seat may be injured during a collision or
sudden stop. An unsecured safety seat could also injure
other passengers.
*
[SR16140( X)06/95]
Children weighing less than 40 lbs. (18 kg) should use child or
infant seats. Forward facing child seats must have the passenger
seat moved as far back from the instrument panel as possible.
%*
[SR16150( X)05/95]
RWARNING
REAR-FACING INFANT SEATS SHOULD NEVER BE
USED IN THE FRONT SEAT. REAR-FACING INFANT
SEATS MUST ALWAYS BE PLACED IN THE REAR
SEAT. Failure to follow these instructions could result in
serious injury.
*
[SR16200(ALL)02/96]
RWARNING
Carefully follow all of the manufacturer's instructions
included with the safety seat you put in your vehicle. If
you do not install and use the safety seat properly, the
child may be injured in a sudden stop or collision.
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996

54
*
[SR16250(ALL)06/95]
RWARNING
Seatbacks should be upright for use with child safety
seats.
*
[SR16275(ALL)07/95]
RWARNING
Always keep the buckle release button pointing upward
and away from the child seat, with the tongue between
the child seat and the release button as shown in the
following illustration.
[SR16280(ALL)06/95]
17-1/2 pica
art:0011286-AFile:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996

Safety Restraints
55
[SR16290( X)02/96]
Safety Seats for Children
[SR16300( X)02/96]
Use a safety seat that is recommended for the size and weight
of the child. Always follow the safety seat manufacturer's
instructions when installing and using a safety seat.
*
[SR16310(ALL)02/96]
When possible, put children in the rear seat of your vehicle.
Accident statistics suggest that children are safer when properly
restrained in the rear seating positions than in the front seating
positions.
[SR16320( X)02/96]
Ford recommends the use of a child safety seat having a top
tether strap. Install the child safety seat in a seating position
which is capable of providing a tether anchorage. For more
information on top tether straps see your Ford or
Lincoln-Mercury dealer.
[SR16330( X)02/93]
When installing a child safety seat, be sure to use the correct
safety belt buckle for that seating position, and make sure the
tongue is securely fastened in the buckle.
[SR16340( X)02/96]
Children weighing less than 40 lb. (18 kg) should use child or
infant seats. Forward facing child seats must have the passenger
seat moved as far back from the instrument panel as possible.
[SR16350( X)02/96]
RWARNING
REAR-FACING INFANT SEATS SHOULD NEVER BE
PLACED IN THE FRONT SEAT. REAR-FACING
INFANT SEATS MUST ALWAYS BE PLACED IN THE
REAR SEAT. Failure to follow these instructions could
result in serious injury.
[SR16360( X)02/96]
All child restraint systems are designed to be secured in vehicle
seats by lap belts or by the lap portion of a lap-shoulder belt.
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996

Safety Restraints
57
[SR16400( X)02/96]
Installing Safety Seats in Combination Lap and
Shoulder Belt Seating Positions
[SR16410( X)02/96]1.
Position the child safety seat in a seat with a combination
lap and shoulder belt.
[SR16420( X)02/96]
If you choose to install a child safety seat in the front
passenger seat, move the seat as far back as possible.
[SR16430( X)02/96]2.
Pull down on the shoulder belt and then grasp the shoulder
belt and lap belt together.
[SR16440( X)02/96]
17-1/2 pica
art:0011238-B
Pulling out belt webbing
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996

64
%*
[SR18400(ALL)06/95]
Attaching Safety Seats With Tether Straps
*
[SR18410(ALL)06/95]
General Instructions
*
[SR18413(ALL)06/95]
Some manufacturers make safety seats that include a tether
strap that goes over the back of the vehicle seat and attaches to
an anchoring point. Other manufacturers offer the tether strap
as an accessory. Contact the manufacturer of your child safety
seat for information about ordering a tether strap.
*
[SR18417( X)06/95]
You can attach a tether strap anchor bracket to the rear floor by
using a tether anchor kit (613D74), available at no charge from
any Ford dealership.
[SR18420(ALL)09/95]
Read and follow the instructions provided with the kit carefully,
for installation of the child tether strap anchor.
[SR18501(ALL)09/95]
Follow the child seat manufacturer's instructions to attach the
tether strap to the tether bracket.
*
[SR18700( X)06/95]
Ford recommends placement of tethered safety seats in a rear
seating position with the tether strap installed to the tether
anchoring point as shown in the instructions provided with the
child tether strap anchor kit.
*
[SR18950(ALL)06/95]
RWARNING
Only use the tether attachment hole locations shown in
the illustrations. The tether anchor may not perform
properly if the wrong mounting location is used.
*
[SR19400( X)06/95]
The rear lap/shoulder safety belts should not be used to secure
the tether strap of a safety seat located in the front seat.
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996

Safety Restraints
65
%*
[SR19700(ALL)07/95]
Safety Belts for Children
*
[SR19800(ALL)07/95]
Children who are too large for child safety seats should always
wear safety belts. (See instructions with your child seat, or
contact its manufacturer, to determine maximum size of child
that will safely fit in the seat.)
*
[SR19900(ALL)07/95]
RWARNING
If safety belts are not properly worn and adjusted as
described, the risk of serious injury to the child in a
collision will be much greater.
*
[SR20000(ALL)12/95]
If the shoulder belt portion of one of the lap and shoulder belts
can be positioned so that it does not cross or rest in front of the
child's face or neck, the child should wear the lap and shoulder
belt. Moving the child closer to the center of the vehicle may
help provide a good shoulder belt fit.
*
[SR20050(ALL)07/95]
To improve the fit of lap and shoulder belts on children who
have outgrown child safety seats, Ford recommends use of a
belt-positioning booster seat that is labelled as conforming to all
Federal motor vehicle safety standards. Belt-positioning booster
seats raise the child and provide a shorter, firmer seating
cushion that encourages safer seating posture and better fit of
lap and shoulder belts on the child. A belt-positioning booster
should be used if the shoulder belt rests in front of the child's
face or neck, or if the lap belt does not fit snugly on both
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996

114
*
[IP02550(ALL)04/95]
Operating tips
*
[IP02600(ALL)02/95]
The following tips will help you to get the most satisfaction
from your air conditioning and heater system.
[IP02650(ALL)03/95]
n
In humid weather, selectVbefore starting your engine.
This will help to prevent windshield fogging. After a few
minutes of operation, you may select another function.
[IP02700(ALL)03/95]
n
To prevent humidity buildup inside your vehicle, always
drive with the air conditioner or heater system turned on.
*
[IP02750(ALL)03/95]
n
Do not put objects under the front seats that interfere with
the flow of air to the back seat area.
[IP02800(ALL)03/95]
n
Remove any snow, ice, or leaves from the air intake area of
your air conditioner and heater system that could block the
air intake. The intake area is located at the bottom of the
windshield.
[IP04500( X)03/95]
Electronic Automatic Temperature Control
(If equipped)
[IP04600( X)03/95]
The control for your Electronic Automatic Temperature Control
(EATC) is located at the center of the instrument panel below
the radio and will operate only when the ignition key is turned
on to the ON position.
[IP04700( X)03/95]
The EATC feature will maintain the temperature you select and
automatically control the airflow for your comfort. It also allows
you to override the automatic operation with manual override
buttons.
File:06unipx.ex
Update:Thu Feb 29 09:05:45 1996

124
*
[IP09000( X)04/95]
n
To prevent humidity buildup inside your vehicle, always
drive with the EATC System turned on.
*
[IP09100( X)03/95]
n
Do not put objects under the front seats that interfere with
the flow of air to the back seat area.
[IP09200( X)03/95]
n
Remove any snow, ice, or leaves from the air intake area of
your EATC System which could block the air intake. The
intake area is located at the bottom of the windshield.
*
[IP09300( X)04/95]
Service
*
[IP09400( X)04/95]
If your EATC is not operating as described here, take it to your
dealer to have it checked. System diagnostics are built in which
will allow your dealer to readily identify problems that might
occur.
[IP09500( X)10/94]
Rear Fan and Airflow Operation
*
[IP09600( X)03/95]
Fan speed adjustment
[IP09700( X)05/95]
The
H(right) knob controls the volume of air flow. Rotate the
knob upward to increase fan speed and increase the amount of
air entering the vehicle. Three fan speed positions are available
and are indicated by dots beside the
Hknob. The largest dot is
high speed position.
[IP09800( X)10/94]
InO (OFF), all blower motor operation is stopped.
*
[IP09900( X)08/94]
Airflow selections
[IP10000( X)05/95]
Q(Vent)
[IP10100( X)05/95]
Airflow will be to the upper console registers whenQis
selected.
*
[IP10200( X)08/95]
R(Floor)
[IP10300( X)05/95]
Airflow will be to the floor whenRis selected.
File:06unipx.ex
Update:Thu Feb 29 09:05:45 1996

Features
163
*
[FV17400(ALL)04/95]
The remote entry system may not arm and disarm non-factory
installed anti-theft systems.
[FV17425( X)03/95]
Remote Memory Seat Feature (If equipped)
[FV17452( X)03/95]
Your vehicle allows the remote keyless entry system to control
theMemory Seatsystem (see Memory Seat section of this Owner
Guide). With this feature, each of the first three transmitters
programmed will recall a different seat position.
[FV17453( X)03/95]
The feature is turned on at the factory for your convenience.
[FV17454( X)05/93]
Pressing the transmitter UNLOCK button once will unlock the
driver's door and move the seat to its corresponding memory
seat position, just as if you had pressed the memory seat button
in the vehicle.
*
[FV17456( X)01/95]
When your dealer programs new transmitters, the order of
programming controls seat recall as follows:
[FV17458( X)03/95]
n
First transmitter programmed Ð recall seat position #1
[FV17460( X)03/95]
n
Second transmitter programmed Ð recall seat position #2
[FV17462( X)03/95]
n
Third transmitter programmed Ð recall seat position #3
[FV17464( X)03/95]
n
Fourth transmitter programmed Ð NO recall (Memory Seat
allows only three memory positions)
[FV17466( X)05/03]
You may change seat positions at any time. Once programmed,
Transmitter #1 will always move the seat to position #1.
[FV17483( X)03/95]
You can deactivate or reactivate the remote Memory Seat
feature:
[FV17485( X)02/95]1.
Make sure the anti-theft system is not armed or triggered,
ignition is off, and all doors and liftgate window are closed.
*
[FV17490( X)02/95]2.
Turn the ignition key from OFF to RUN.
*
[FV17495( X)02/95]3.
Press the door power unlock button 3 times.
*
[FV17500( X)02/95]4.
Turn the ignition key from RUN to OFF.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996