seats FORD EXPLORER 1996 2.G Owner's Manual

174
%*
[FV24101(ALL)01/95]
Seats
[FV24250( X)10/94]
Four-Way Head Restraints (If equipped)
[FV24325(ALL)06/94]
Adjust the head restraints so that the cushion contacts the back
of your head when you move your head rearward.
[FV24350( X)10/94]
The head restraint may be adjusted in four directions. To raise
or lower the head restraint, push in the lock release button. The
button is located on the outboard side of the post of the head
restraint for the driver's side and the inboard side for the
passenger side. To adjust the head restraint forward or
rearward, simply push or pull head restraint to desired position.
[FV24650( X)04/94]
7-1/2 pica art:0021021-B
Adjusting the head restraint (limited)
%*
[FV24801(ALL)05/90]
Adjusting the Front Seat Manually
*
[FV25920(ALL)06/95]
To move the front seat forward or rearward:
[FV25930(ALL)08/94]1.
Find the adjustment bar at lower front of the front seat.
[FV25940(ALL)10/94]2.
Lift bar upward to unlatch the seat.
*
[FV25950(ALL)08/95]3.
Move the seat to the desired position.
[FV25960(ALL)10/94]4.
Release the bar to latch the seat in its new position. Make
sure the seat latches securely in place.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996

176
[FV26400(ALL)08/94]
Reclining Bucket Seats (If equipped)
*
[FV27301( X)02/92]
You can tilt the seat back of your bucket seats backward.
*
[FV27401( X)03/93]1.
On the outboard side of the seat, lift the recliner handle up
and hold it in place.
*
[FV27501( X)10/89]2.
Lean against the back of the seat and adjust it to the position
you want.
[FV27601( X)10/94]3.
Release the handle to latch the seat back in place.
*
[FV27701( X)10/89]4.
To return the seat back upright, lift the handle and lean
forward.
[FV27751(ALL)08/94]
Lifting the recliner handle of an unoccupied seat will allow the
seat back to fold forward for access to the rear. Pushing the seat
back with the release handle raised returns the seat back to the
upright position.
[FV27800(ALL)04/94]
10-1/2 pica
art:0021165-A
Reclining bucket seat
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996

182
*
[FV46075(ALL)03/93]
To operate the seat adjuster:
[FV46080(ALL)10/94]4.
To adjust the seats forward or rearward, locate the release
bar at the lower front area of the seat cushion. Lift the
release bar and hold until the desired seat position is
obtained, then release the bar to relock the seat.
[FV46085(ALL)10/94]
10-1/2 pica
art:0021168-B
Adjusting seat
[FV46100(ALL)02/91]
60/40 Split Front Bench (If equipped)
[FV46200( X)10/90]
The seat back release operates the same as the basic bucket seat.
On two door models both seats have the slide tilt feature.
[FV46500( X)08/94]
7-1/2 pica art:0020637-C
60/40 split front bench
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996

Features
183
%*
[FV46600(ALL)05/95]
Using the Power Seats (If equipped)
*
[FV46700(ALL)08/94]
If your vehicle has the power seat option, you can adjust it in
several directions. The controls are on the outboard side of the
seat.
[FV46800(ALL)08/94]
17-1/2 pica
art:0020888-B
The power controls on the driver's seat
[FV46910( X)03/93]
Three Person Memory Seats Ð Explorer Limited Only
[FV46920( X)03/93]
Your Explorer Limited has a three person memory driver seat
which includes power tracks. The memory switch is located in
the driver door trim panel forward of the power mirror switch.
[FV46925( X)03/93]
It is also equipped with power lumbar support, infinite position
seatback and four way head restraints.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996

186
[FV48300(ALL)08/94]
10-1/2 pica
art:0021169-C
Power lumbar and side bolsters switch Ð sport bucket seat
%*
[FV48310(ALL)04/95]
Cleaning the Seats
%*
[FV48315(ALL)04/95]
Fabric
*
[FV48320(ALL)05/95]
Remove dust and loose dirt with a whisk broom or a vacuum
cleaner. Remove fresh spots immediately. Follow the directions
that come with the cleaner.
*
[FV48325(ALL)09/95]
NOTE: Before using any cleaner, test it on a small, hidden
area of fabric. If the fabric's color or texture is
adversely affected by a particular cleaner, do not use
it.
[FV48340(ALL)02/96]
Cleaning your vehicle
[FV48345(ALL)02/96]
Leather
[FV48350(ALL)12/95]
For routine cleaning, wipe the surface with a soft, damp cloth.
For more thorough cleaning, wipe the surface with a leather and
vinyl cleaner or a mild soap.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996

194
[FV59400(ALL)08/94]
Console (If equipped)
*
[FV59500(ALL)12/91]
Your vehicle may have a full console. The full console has the
features shown in the illustration below.
[FV59600( X)08/94]
NOTE: Ford recommends the use of 12 oz. (355 ml.) beverage
cans in the cupholder. With manual transmissions there may be
an interference of the shift lever, when in reverse, with taller
beverage cans.
[FV59700(ALL)07/95]
17-1/2 pica
art:0090211-A
The features on the console Ð bucket seats
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996

Features
203
[FV65400( X)03/95]
Rear Console (If equipped)
[FV65500( X)03/95]
Your Explorer comes with a rear console that is located between
the bucket seats. The console includes:
[FV65600( X)08/94]
n
Air vents, with rear seat controls
[FV65700( X)08/94]
n
Radio controls
[FV65800( X)10/94]
n
Beverage holder
[FV65900( X)05/95]
17-1/2 pica
art:0090192-A
Rear console
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996

Driving Your Explorer
273
*
[DR29501(ALL)12/91]
Trucks, unlike passenger cars, are basically custom vehicles
designed to carry a load. Most owners start with a base vehicle
and add production and dealer installed and/or aftermarket
components to suit their tastes and purposes. Even trucks that
are purchased for personal transportation only are likely to have
considerable optional equipment, such as step bumpers and
light bars, for example.
*
[DR29525(ALL)09/95]
RWARNING
It is extremely dangerous to ride in a cargo area, inside
or outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured or
killed.
*
[DR29530(ALL)09/95]
RWARNING
Do not allow people to ride in any area of your vehicle
that is not equipped with seats and safety belts.
*
[DR29535(ALL)09/95]
RWARNING
Be sure everyone in your vehicle is in a seat and using a
safety belt properly.
*
[DR29551(ALL)03/91]
Each additional item of equipment affects how much cargo a
vehicle can carry. If a vehicle is overloaded, performance will
suffer and service concerns may arise.
*
[DR29601(ALL)04/95]
The following is a typical example of a Safety Compliance
Certification Label and an explanation of how this information
should be used:
File:10undrx.ex
Update:Thu Feb 29 09:12:36 1996

Roadside Emergencies
301
*
[RE05000(ALL)01/95]
n
drive through an automatic car wash with this tire. Because
the temporary spare tire is smaller than a conventional tire,
it reduces the ground clearance. Your vehicle may get caught
in the rails and it could be damaged.
%*
[RE05100(ALL)03/95]
Spare Tire Location
*
[RE05250(ALL)06/94]
The spare tire for your vehicle is stowed at the rear under the
frame.
*
[RE05550( X)03/91]
To remove the spare tire:
[RE05650( X)10/94]1.
Open the liftgate. Assemble the jack handle (stowed behind
the rear seats under the carpet) to the lug wrench (stowed in
driver's side rear quarter trim panel). Insert drive section of
the handle into the actuator hole and turn counterclockwise
until the cable is slack enough to allow the spare tire to be
pulled rearward from under the vehicle.
*
[RE05700( X)10/94]2.
Slide the spare tire to the rear and remove the retainer from
the wheel.
*
[RE05850( X)10/94]3.
To stow the cable/retainer with spare removed, turn jack
handle wrench clockwise until slack is removed.
[RE05875( X)10/94]
7-1/2 pica art:0021216-A
Assembling the jack handle
File:12unrex.ex
Update:Thu Feb 29 09:14:34 1996

Roadside Emergencies
305 instruction sheet and a pair of tire changing gloves. Thejack
handleis stowed behind the second row passenger seats under
the carpet. Assemble handle sections and lug wrench together.
[RE16075( X)02/95]
7-1/2 pica art:0021218-A
Assembling the jack handle
[RE16150( X)10/94]
17-1/2 pica
art:0020559-C
Jack stowage area
File:12unrex.ex
Update:Thu Feb 29 09:14:34 1996