boot FORD EXPLORER 1996 2.G Owners Manual

22
*
[SR09790(ALL)08/95]
Use only extensions manufactured by the same supplier as the
safety belt. Manufacturer identification is located at the end of
the webbing on the label. Also, use the safety belt extension
only if the safety belt is too short for you when fully extended.
Do not use extension to change the fit of the shoulder belt
across the torso.
*
[SR09800(ALL)08/95]
RWARNING
Failure to follow these instructions will affect the
performance of the safety belts and increase the risk of
personal injury.
%*
[SR09900(ALL)08/95]
Safety Belt Maintenance
*
[SR10000(ALL)09/95]
Check the safety belt systems periodically to make sure that
they work properly and are not damaged.
[SR10020( X)06/95]
The short plastic boot on the front safety belt at the passenger
outboard anchor location covers an energy absorbing sew
pattern on the safety belt. In the event of an accident, the sew
pattern may release, and the colored label (REPLACE BELT)
may become visible. If this occurs,the safety belt must be
replaced.
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996