spare tire FORD EXPLORER 2004 3.G Quick Reference Guide

(if equipped)
For information on other types of radios,
please refer to your Owner’s Guide.
Scan Function–In radio mode, press
to hear a sampling of all listenable
stations. In CD mode, press to hear a
brief sampling of all selections on the
current CD.
CD/AUX – Press to select CD/AUX modes.
No CD will display if there is not a CD
present in the audio system. If a disc is
loaded, there will be a number (1-6) inside
the circle on the display. When in radio
mode, press CD/AUX to play a loaded CD.
Loading CD– Press LOAD and then a
preset number to select a slot. Press and
hold LOAD to activate autoload.
Volume/Power Control – Press the
control to turn the audio system on or
off. Turn the control to raise or lower
volume. The speed-sensitive volume
feature automatically adjusts radio
volume in accordance with vehicle speed
to compensate for road and wind noise.
To engage, press and hold the volume
control for five seconds (with the radio
on), then simultaneously press SEL to
choose the compensation level.
AM/FM Select – In radio mode, press
AM/FM to select AM or FM frequency
bands. In CD mode, press AM/FM to stop
play and begin radio play. Press and hold
AM/FM to activate autoset.
Satellite – Your Audiophile radio comes
equipped with satellite-ready capability.
The kit to enable satellite reception is
available through your Ford dealer.
Detailed satellite instructions are included
with the dealer-installed kit.
Disc/Tune CAT– In radio mode, press to
move to the next frequency up or down
the band. In CD mode, press to select a
disc in the CD player. CAT is only available
when equipped with satellite radio.
Digital Signal Processing– Press DSP and
then SEL to choose the desired signal
mode (DSP OFF, NEWS, JAZZ CLUB, HALL,
CHURCH, STADIUM).
Seek Function– In radio mode, press to
move to the next listenable station up or
down the band. In CD mode, press to
select the next/previous track on the
current disc.
Setting the Clock– Press MENU until
SELECT HOUR or SELECT MINUTE is
displayed. Press SEL to set the time. Press
MENU again to disengage the clock mode.
Setting Memory Preset Stations– Select
AM, FM1, or FM2 band, then select a
station. Next, press and hold a numbered
control until the sound returns.
A
B
D
E
C
F
G
J
K
I
H
A
J
K
I
G
C
D
E
F
HB
CAUTION: DO NOT USE CD WITH ADHESIVE LABEL*
* CDs with adhesive labels and irregularly shaped CDs may get stuck in the CD player. Homemade
CDs should be identified with permanent felt tip marker rather than adhesive labels.
June 2003
First Printing
Quick ReferenceExplorer
Litho in U.S.A.
Temperature Selection–To control
the temperature for the driver and
passenger, select the desired
temperature by pressing the driver’s
or passenger’s temperature controls.
Outside Temperature – Press EXT to
display the outside air temperature.
Press again to disengage.
Automatic Operation– In this mode,
the system will automatically determine
fan speed and airflow location to
achieve the temperature selected.
A
B
F
A
B
E
C
D
F
Tire Pressure –Your tire pressure is properly set at the dealership according to the recommended
specifications found on the Tire Pressure Label located on the driver door jamb. Please check your tire
pressure during routine maintenance and seasonal changes. If the Tire Pressure Monitoring System
light (if equipped) stays illuminated after starting, immediately check your tire pressure.
Warning:Improperly inflated tires can affect vehicle handling and can fail suddenly, possibly resulting in loss
of vehicle control.
Fuel Tank Capacity–Your vehicle’s fuel tank can accommodate 85.2L (22.5 gallons) of gasoline. Your
vehicle is designed to use "Regular" unleaded gasoline with a pump (R+M)/2 octane rating of 87 for
optimum performance. The use of gasoline with lower octane ratings may degrade performance.
Fuses–If electrical components in the vehicle are not working, a fuse may have blown. For more
information about changing a fuse, please consult your Owner’s Guide.
Fuel Pump Shut-Off Switch–After a collision, if the engine cranks but does not start, the fuel
pump shut-off switch may have to be reset. The switch is located in the passenger’s footwell, by
the kick panel. For complete details on resetting the switch, please consult your Owner’s Guide.
Changing the Tires–Your spare is not equipped with a tire pressure monitoring system sensor.The tire pressure monitoring system indicator light (if equipped) will illuminate when the
spare is in use. Replace the spare with the road tire as soon as possible. If your vehicle is
equipped with AWD, remember that a spare tire of a different size shall not be used. It can
make your vehicle difficult to control and can result in damage to driveline components.
If you get a flat tire while driving, do not apply the brake heavily. Instead, gradually decreaseyour speed. Hold the steering wheel firmly and slowly move to a safe place on the side
of the road.
Location of the Spare Tire and Tools
Item Location
Spare Tire Under the vehicle, just in front of the rear bumper
Spare Tire Winch Drive Nut At the rear center of the cargo area under a lid
Jack, Lug Nut Wrench, Behind the rear seat, under the carpeted floor
Jack Handle, and Wheel Chock lid in the cargo floor
Roadside Emergencies– To fully assist you if you should have a vehicle concern, Ford Motor
Company offers a complimentary roadside assistance program. This program is separate from the
New Vehicle Limited Warranty. The service is available: 24 hours, seven days a week for the Basic
Warranty period (Canada) or New Vehicle Limited Warranty period (U.S.) of three years or 60,000
km (36,000 miles). Roadside assistance will cover:
Changing a flat tire Jump-starts Limited fuel delivery
Lock-out assistance Towing of your vehicle
Roadside Assistance Centers
Country Phone Number
United States (800) 241-3673
Canada (800) 665-2006
For complete details on any roadside assistance concern, see the Roadside Emergencies chapter or the Customer
Assistance chapter in your Owner’s Guide.
EXPLORER
Quick Reference Guide
A/C Control– Press to manually
enable or disable the air conditioning
in all modes except Defrost and Floor
and Defrost.
Dual Operation– Press DUAL to
enable /disable the dual zone
temperature feature.
Manual Override Controls– When
pressed, these six controls will override
automatic operation. To return to
automatic operation, press AUTO.
2004 2004model
2004 MODEL EXPLORER QUICK REFERENCE GUIDE
E
D
To open the liftgate window, with
the liftgate unlocked, push the control
button on the
right sideunder the
license plate lamp shield, or press the
control on the remote entry key fob.
To lock the liftgate window and the
liftgate, use the power door locks or
press the door lock switch on the left
side of the cargo area.
The liftgate door and window should
be closed before driving. If not,
possible damage may occur to your
vehicle. Always close the liftgate
window before opening the liftgate.
The liftgate glass and the liftgate
should never be open at the same time.
Volume/Power Control–Press the
control to turn the audio system on or
off. Turn the control to raise or lower
volume. If the volume is set above a
certain level and the ignition is turned
off, the volume will come back on at a
"nominal" listening level when the
ignition switch is turned back on.
AM/FM Select–In radio mode, press
to select AM or FM frequency bands. In
tape or CD mode, press to stop play
and begin radio play.
Seek Function– In radio mode, press to
find the next listenable station up or
down the band. In tape mode, press to
move to the next/previous selection on
the tape. In CD mode, press to select
the next/previous track of the disc.
Scan Function– In radio mode, press
to hear a sampling of all listenable
stations. In tape or CD mode, press
to hear a brief sampling of all
selections. Press the control again
to stop the scan mode.
Tune Adjust – In radio mode, press to
move to the next frequency up or
down the band.
Tape/CD Select– To begin tape play
while in radio or CD mode, press the
tape control. To begin CD play, press
the CD control. Press the CD control
again to toggle between single CD
and CD changer play (if equipped).
Autoset Memory Preset – Select AM,
FM1, or FM2 band, then press AUTO to
activate autoset memory preset, which
allows you to set strong radio stations
without losing your original manually
set preset stations. Press again to
deactivate autoset.
Setting the Clock– Press EXT and hold
CLK and then press SEEK to set the
hour. Press and hold CLK and then press
TUNE to set the minute.
Select– press to adjust sound output
and distribution after selecting BASS,
TREB, BAL or FADE.
Setting Memory Preset Stations–
Select AM, FM1, or FM2 band, then
select a station. Next, press and hold a
numbered control until the sound
returns.
A
B
E
D
C
F
G
I
A
B
E
D
C
F
G
J
I
H
J
HC
C
A
A
*F4L2J19G217AA*
4L2J-19G217-AA
(if equipped)(if equipped)
This Quick Reference Guide is not intended to replace your
vehicle’s Owner’s Guide, which contains more detailed
information concerning the features of your vehicle and
important safety warnings to help reduce the risk of injury to
you and your occupants. Always carefully read your entire
Owner’s Guide when first learning about your vehicle and
consult the appropriate chapter when questions arise.
All information contained on the Quick Reference Guide
was accurate at the time of duplication. We reserve the right
to change features, operation and/or functionality of any
vehicle specification at any time. Your Ford dealer is the best
source for the most current information.
For detailed operating and safety information, please consult
your Owner’s Guide.
Ford Motor Company
Customer Relationship Center
16800 Executive Plaza Drive P.O. Box 6248
Dearborn, Michigan 48121 (800) 392-3673
21270 Explorer_QRG_06.25.03.qxd 7/3/03 12:53 PM Page 1