remote control FORD EXPLORER 2013 5.G Owner's Guide

8. The LED lamp will begin to flash rapidly until programming is
complete. If your garage door does not operate, repeat the previous
steps. Otherwise, call the toll-free help line on 1-866-572-2728.
The LED lamp above the selected button will illuminate to confirm that
the system is responding to the button command.
Erasing the function button codes
Note:You cannot erase individual
buttons.
1. Press and hold the outer two
function buttons simultaneously for
approximately 20 seconds until the
LED lamps above the buttons flash
rapidly.
2. When the LED lamps flash, release the buttons. The codes for all
buttons are erased.
FCC and RSS-210 Industry Canada Compliance
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to your device not expressly approved by the
party responsible for compliance can void the user’s authority to operate
the equipment.
HOMELINKWIRELESS CONTROL SYSTEM (IF EQUIPPED)
WARNING:Make sure that the garage door and security device
are free from obstruction when you are programming. Do not
program the system with the vehicle in the garage.
WARNING:Do not use the system with any garage door opener
that does not have the safety stop and reverse feature as required
by U.S. Federal Safety Standards (this includes any garage door opener
manufactured before April 1, 1982).
Note:Make sure you keep the original remote control transmitter for use
in other vehicles as well as for future system programming.
Universal Garage Door Opener193
2013 Explorer(exp)
Owners Guide gf, 1st Printing
USA(fus)

The fast restart feature allows you to restart your vehicle within
20 seconds of switching the vehicle off, if a valid passive key is not
present. Apply the brake pedal and press the start button for up to
20 seconds. After 20 seconds have expired, you can no longer start your
vehicle without the passive key present inside the vehicle.
Once the vehicle has started, the vehicle will remain running until being
turned off by the start button, even if the passive key is no longer found
in the vehicle. Whenever a door is opened and then closed while the
vehicle is running, the system will search for a passive key inside the
vehicle. If the passive key is no longer present in the vehicle, you will not
be able to restart your vehicle outside of the fast restart time.
Your vehicle may have remote start capability. Refer toRemote startin
theKeys and Remote Controlchapter.
STARTING A GASOLINE ENGINE
When the engine starts, the idle RPM runs faster to warm the engine. If
the engine idle speed does not slow down automatically, have the vehicle
checked.
Before starting the vehicle:
•Make sure all occupants buckle their safety belts.
•Make sure the headlamps and electrical accessories are off.
•Make sure the parking brake is set.
•Make sure the gearshift is in P (Park).
•Turn the key to on without turning the key to start.
Some warning lights will briefly illuminate.
Note:Do not touch the accelerator pedal.
1. Select park or neutral.
2. Fully press the brake pedal.
3. Turn the key to start the engine. The engine may continue cranking
for up to 15 seconds or until the vehicle starts.
Note:If the engine does not start on the first try, wait for a short period
of time and try again.
If you have difficulty starting the engine when the temperature is below
-13°F (-25°C), press the accelerator pedal slightly and try again.
Starting and Stopping the Engine207
2013 Explorer(exp)
Owners Guide gf, 1st Printing
USA(fus)

Cause Action
Swirling water, or snow or ice on
the surface of the road may
interfere with the radar signalsDo not use ACC in these condition
because it may not detect, warn,
or respond to potential collisions.
Desert / remote area with no other
vehicles and no roadside objectsWait a short time or switch to
normal cruise control.
Due to the nature of radar technology, it is possible to get a blockage
warning and not be blocked. This can happen, for example, when driving
in sparse rural or desert environments. A false blocked condition will
either self clear or clear after a key cycle.
Switching to Normal Cruise Control
WARNING:Normal cruise control will not brake due to slower
vehicles. Always be aware of which mode is selected and apply
the brakes when necessary.
You can manually change from adaptive cruise control to normal cruise
control through the information display.
The cruise control indicator light will replace the adaptive
cruise control indicator light if normal cruise control is selected.
The gap setting will not be displayed, the system will not
automatically respond to lead vehicles and automatic braking will not be
activated. The system will default to adaptive cruise control when the
engine is started.
Cruise Control261
2013 Explorer(exp)
Owners Guide gf, 1st Printing
USA(fus)

Power steering .......................... 277
Power Windows ......................... 106
Privacy information .......... 428, 478
Push button start system ......... 205
Putting a call on/off hold ......... 435
Q
Quick touch buttons ................. 548
R
Radio .......................... 146, 150–151
AM/FM ..................................... 487
Single CD ................ 146, 150–151
Radio reception ......................... 144
Radio voice commands ............. 493
Rear view camera
display ................................ 248, 528
Rear window
defroster .................... 158, 160, 162
Receiving a text
message ............................. 438, 513
Recommendations for
attaching safety restraints
for children .................................. 25
Relays ................................ 313–314
Remote entry system
illuminated entry ...................... 79
locking/unlocking doors ........... 75
opening the trunk ..................... 76
replacing the batteries ............. 63
Reverse sensing system ........... 243
Roadside assistance .................. 300
Roll stability control ................. 238
Roof rack ................................... 279
Route preferences .................... 544S
Safety Belt Maintenance ............ 47
Safety belts
(see Safety restraints) ......... 39, 42
Safety defects, reporting .......... 312
Safety information ............ 427, 476
Safety restraints .............. 39–40, 42
Belt-Minder............................. 43
Belt-Minder,
deactivating/activating ............. 44
extension assembly .................. 42
for adults ............................. 39–40
for children ......................... 20, 25
inflatable safety belt ................. 46
Occupant Classification
Sensor ........................................ 53
safety belt maintenance ........... 47
seat belt maintenance .............. 47
warning light and chime .......... 43
Safety restraints -
LATCH anchors ........................... 30
Safety seats for children ...... 20, 25
Safety Compliance
Certification Label .................... 398
Satellite Radio ................... 146, 494
Scheduled Maintenance Guide
Normal Scheduled
Maintenance and Log ............. 412
SD card ...................... 154, 502, 539
Seat belts
(see Safety restraints) ............... 39
Seats .......................................... 178
child safety seats ................ 20, 25
climate control ........................ 177
easy access/easyout feature .. 175
front seats ............... 172–173, 176
heated ...................................... 175
574Index
2013 Explorer(exp)
Owners Guide gf, 1st Printing
USA(fus)