lock FORD EXPLORER 2013 5.G Quick Reference Guide

7
• You can interrupt the system while it is speaking by pressing
the voice button.
help!At any time, you can give the voice command “Help”. The
system will provide an audible list of voice commands available
in your current mode.
u sing mY PhOne with s Ync
note: You must download your phone book to make phone
calls with voice commands by name. Contacts listed in all caps
will require you to spell them (i.e. JAKE, will be J-A-K-E)
Making a phone call: Use SYNC to make a phone call to anyone in your phone book
by pressing the voice button and when prompted, say any of
the following voice commands:
Call Call at work
Call on cell Call at home
For example, you could say “Call Mom at home”. SYNC repeats
the command back to you and dials the number.

note: You can also make phone calls by pressing the voice
button and when prompted, saying the voice command “Dial”,
then verbally say the phone number.
answering incoming calls:Whenever you have an incoming call, you will be able to see the
name and number of the person calling in your display. Press
the phone button
to answer an incoming call. You can hang
up at any time by pressing and holding the phone button .

do not disturb mode:This feature blocks incoming calls and text messages and sends
them to your voice mail and saves text messages for later. You
still have access to outgoing calls when this feature is active.
Say the voice command, “Do not disturb on” to enable and “Do
not disturb off” to disable.
u sing s Ync tO access digitaL mediaSYNC has a media hub with multiple inputs allowing you to
access personal media from your digital devices. Plug in your
USB media devices such as phones and MP3 players and use
SYNC to play all of your favorite music.
using voice commands to play music:
1 ) Plug your media player into your USB port.
2) Press the voice button . When prompted say “USB”, then
follow-up saying one of the following voice commands.
“Play all” “Play next song”
“Play song ” “Play album ”
3) You will hear the command repeated back to you and the
selected item will play.

11
eaSy FueL® S ySteM With this system, you simply open the
fuel door, insert the nozzle and begin
fueling. It is self-sealing and therefore
protected against dust, dirt, water, snow
and ice. Wait five seconds from the time
the refueling nozzle is shut-off until you
remove the nozzle from the vehicle to
allow residual fuel in the nozzle to drain
into the tank.
note: When using a portable fuel
container, slowly insert the fuel funnel
(located in the spare tire compartment),
and pour the fuel into the funnel. Do not
use aftermarket funnels as they will not
work with the Easy Fuel system and
may cause damage. Properly clean the
funnel after each use.
Rain- SenSing wiPeRS* If activated, your wipers will
automatically turn on when moisture
is present on the windshield. The wiper
speed will vary based on the amount of
moisture detected and on the sensitivity
setting. To deactivate, turn your wiper
controls off.
note: Make sure that this feature is
turned off before entering a car wash.
inteLLigent a cceSS (ia )Key* note: Your intelligent access key must
be within three feet of the vehicle for
intelligent access to function properly.
To unlock the driver’s door, pull the front
exterior door handle. To lock the doors,
press and hold the door handle lock
sensor. To unlock and open the liftgate,
press the exterior liftgate release button
underneath the liftgate handle. The
intelligent access key also contains a
mechanical key blade, which can
be used to unlock the driver’s door
if necessary.
ReMote StaR t* Remote start allows you to start the
engine from outside your vehicle using
your key. To start, press
and then
press twice within three seconds.
Once inside, apply the brake while
pressing the ENGINE START/STOP
button. Shift into D (Drive) and go. If you
have an integrated keyhead transmitter,
simply insert the key into the ignition
and turn the ignition on as you normally
would before driving. To turn the engine
off from outside the vehicle after using
your remote start, press
once.
integR ated Keyhead
tR anSMitteR (iK t)
ReMote entR y iconS*:
• Press once to lock all doors.
Press again within three seconds
to confirm all doors are locked.
• Press
once to unlock the driver’s
door. Press again within three
seconds to unlock all doors.
• Press
to activate the panic
alarm. Press again or turn on the
ignition to deactivate.
• Press
twice within three
seconds to open the liftgate.
• Car finder: Press
twice within
three seconds to locate your vehicle.
The horn will chirp and the lamps
will flash.
c onvenience

14
Function
ReaRview caMeR a* This system provides a visual display of
the area behind the vehicle. The display
automatically appears in the touch screen
when the vehicle is in R (Reverse) and
uses green, yellow and red guides to
alert you of your proximity to objects. For
non-touch screen vehicles, the image will
appear in the 4.2 in display.
ReveRSe SenSing S ySteM*This system sounds a warning tone if
there is an obstacle near the vehicle’s rear
bumper when the vehicle is in R (Reverse)
and is traveling less than 3 mph (5 km/h).
The warning tone will increase in
frequency as the object gets closer.

note: Visibility aids do not replace the
need to watch where the vehicle is moving.
Refer to your Owner’s Manual for safety
information, more details and limitations.
bLind SP ot inFoRMation
Sy SteM (bLiS®) with cR oSS
tR aFFic aLeR t (cta )*
BLIS uses sensors to help you determine
if a vehicle may be in your blind spot
zone. The CTA feature alerts you if a car
is coming toward you when you are
backing out of a parking space. BLIS
and CTA will display a yellow indicator
light in your exterior mirrors and the
CTA will also sound tones and display
messages to warn you which direction
vehicles are approaching. Refer to the
Driving Aids chapter in your Owner’s
Manual for more information.
SeLectShiFt a utoMatic™
tR anSMiSSion*
Gives you the ability to manually change
gears if you’d like. To use, move the
gearshift lever from D (Drive) to S (Sport).
Then use the toggle on your gear shift
lever to make shifts manually. Press the
(+) button to upshift, press the (–) button
to downshift.
MyKey®
MyKey allows you to program certain
driving restrictions in order to promote
good driving habits. You can program
things like; speed restrictions, limited
volume levels and safety belt reminders. For complete information, refer to the
MyKey chapter in your Owner’s Manual.
SecuRicode™ KeyLe
SS
entR y SySteM*
Allows you to lock or unlock the doors
using the touchpad. You will need your
five digit factory code located on your
owner’s wallet card in the glove box.
Refer to the Locks chapter in your
Owner’s Manual for more information
on how to use SecuriCode.
PoweR LiFtgate*Your liftgate has an automatic open
and closing feature. To open remotely,
press
twice on your keyhead within
three seconds. Press twice again to
close or reverse the movement. You can
also operate the liftgate by pressing
the
control located on the
instrument panel.
* (if equipped)