turn signal bulb FORD F150 2001 10.G Owners Manual

FORD F150 2001 10.G Owners Manual F150 2001 10.G FORD FORD https://www.carmanualsonline.info/img/11/5021/w960_5021-0.png FORD F150 2001 10.G Owners Manual

Page 10 of 224

FORD F150 2001 10.G Owners Manual Safety belt
Momentarily illuminates when the
ignition is turned to the ON position
to remind you to fasten your safety
belts. For more information, refer to
theSeating and safety restraints
chapter.
B

Page 183 of 224

FORD F150 2001 10.G Owners Manual Readiness for Inspection/Maintenance (I/M) testing
In some localities, it may be a legal requirement to pass an I/M test of
the on-board diagnostics system. If your ªCheck Engine/Service Engine
SoonÂ

Page 185 of 224

FORD F150 2001 10.G Owners Manual 11. Straighten alignment pins,
making them parallel with the outer
edges of the attachment standoff.
12. Carefully insert the headlamp
assembly into the vehicle making
sure the alignment pins are inse

Page 186 of 224

FORD F150 2001 10.G Owners Manual 6. Align top and bottom ribs of
parking lamp assembly with
corresponding slots on front of
vehicle.
7. Push gently until parking lamp
assembly seats (you will hear a
snap).
8. Install screw on lamp as

Page 187 of 224

FORD F150 2001 10.G Owners Manual Replacing high-mount brake and cargo lamp bulbs
To remove the lamp assembly:
1. Remove the two screws and move
the lamp assembly away from the
vehicle to expose the bulb sockets.
2. Remove the bulb so

Page 188 of 224

FORD F150 2001 10.G Owners Manual 3. Pull out the old bulb from the socket and push in the new bulb.
4. Install the bulb socket in lamp assembly by turning it clockwise.
USING THE RIGHT BULBS
Replacement bulbs are specified in the cha

Page 219 of 224

FORD F150 2001 10.G Owners Manual daytime running light ...............17
fog lamps ...................................18
headlamps .................................17
headlamps, flash to pass ..........17
instrument panel, dimming ..