light FORD F250 1997 User Guide
[x] Cancel search | Manufacturer: FORD, Model Year: 1997, Model line: F250, Model: FORD F250 1997Pages: 377, PDF Size: 3.92 MB
Page 40 of 377
![FORD F250 1997 User Guide 39 %
*
[AS08100(F )08/95]
How To Take Care of and Clean Your CD
Player and Discs
*
[AS08200(F )08/95]
To ensure the continued performance of your
Ford Compact Disc Player, carefully read the
following FORD F250 1997 User Guide 39 %
*
[AS08100(F )08/95]
How To Take Care of and Clean Your CD
Player and Discs
*
[AS08200(F )08/95]
To ensure the continued performance of your
Ford Compact Disc Player, carefully read the
following](/img/11/57800/w960_57800-39.png)
39 %
*
[AS08100(F )08/95]
How To Take Care of and Clean Your CD
Player and Discs
*
[AS08200(F )08/95]
To ensure the continued performance of your
Ford Compact Disc Player, carefully read the
following precautions:
*
[AS08300(F )04/96]
q
Always handle the disc by its edge. Never
touch the playing surface.
*
[AS08400(F )08/95]
q
Before playing, inspect the disc for any
contamination. If needed, clean the disc with
an approved disc cleaner, such as the
DiscwasherHCompact Disc Cleaner or the
Allsop 3HCompact Disc Cleaner, by wiping
from the center out to the edges.Do not use
a circular motion to clean.
*
[AS08500(F )04/96]
q
Do not clean discs with solvents such as
benzine, thinner, commercially available
cleaners or antistatic spray intended for
analog records.
*
[AS08600(F )04/96]
q
Do not expose the disc to direct sunlight or
heat sources such as defroster and floor
heating ducts. Do not leave any discs in a
parked car in direct sunlight where there may
be a considerable rise in temperature or
damage may result.
*
[AS08700(F )04/96]
q
After playing, store the disc in its case.
*
[AS08800(F )04/96]
q
If a disc has already been inserted, do not try
to insert another disc. Doing so may damage
the disc player.
*
[AS08900(F )04/96]
q
Do not insert anything other than a disc into
the disc player.
File:04ltasf.ex
Update:Tue May 28 08:40:59 1996
ProCarManuals.com
Page 50 of 377
![FORD F250 1997 User Guide 49
*
[AS27570(F )08/95]
How to set the clock
*
[AS27575(F )08/95]
1. Turn the radio on.
*
[AS27585(F )04/96]
2. Press and hold in the ªCLOCKº button.
Press the ªSEEKº button left (
b) to advance
t FORD F250 1997 User Guide 49
*
[AS27570(F )08/95]
How to set the clock
*
[AS27575(F )08/95]
1. Turn the radio on.
*
[AS27585(F )04/96]
2. Press and hold in the ªCLOCKº button.
Press the ªSEEKº button left (
b) to advance
t](/img/11/57800/w960_57800-49.png)
49
*
[AS27570(F )08/95]
How to set the clock
*
[AS27575(F )08/95]
1. Turn the radio on.
*
[AS27585(F )04/96]
2. Press and hold in the ªCLOCKº button.
Press the ªSEEKº button left (
b) to advance
the hours and right (
a) to advance the
minutes.
*
[AS27595(F )09/95]
NOTE: The clock displays 12-hour time with
no AM/PM indications.
*
[AS27600(F )04/96]
Tips on Caring for the Cassette Player and
Tapes
*
[AS27700(F )08/95]
In order to keep your cassette tape player
performing the way it was meant to, read and
follow these simple precautions:
*
[AS27750(F )04/96]
q
Using a Ford Cassette Cleaning Cartridge or
equivalent to clean the tape player head after
10-12 hours of play will help maintain the
best playback sound and proper tape
operation.
*
[AS27800(F )08/95]
q
Only cassettes that are 90 minutes long or
less should be used. Tapes longer than 90
minutes are thinner and subject to breakage
or may jam the tape player mechanism.
*
[AS27900(F )08/95]
q
Protect cassettes from exposure to direct
sunlight, high humidity and extreme heat or
cold. If they are exposed to extreme
conditions, allow them to reach a moderate
temperature before playing.
*
[AS28001(F )08/95]
q
If a tape is loose inside the cassette, tighten it
before playing by putting your finger or a
pencil into one of the holes and turning the
hub until the tape is tight.
*
[AS28101(F )08/95]
q
Loose labels on cassette tapes can become
lodged in the mechanism. Remove any loose
label material before inserting a cassette.
*
[AS28200(F )08/95]
q
Do not leave a tape in the cassette tape
player when not in use. High heat in the
vehicle can cause the cassette to warp.
File:04ltasf.ex
Update:Tue May 28 08:40:59 1996
ProCarManuals.com
Page 55 of 377
![FORD F250 1997 User Guide 54
*
[AS35600(F )08/95]
2. Terrain
*
[AS35700(F )08/95]
The terrain (hilly, mountainous, tall buildings) of
the area over which the signal travels may
prevent the FM signal from being noise-free.
*
[A FORD F250 1997 User Guide 54
*
[AS35600(F )08/95]
2. Terrain
*
[AS35700(F )08/95]
The terrain (hilly, mountainous, tall buildings) of
the area over which the signal travels may
prevent the FM signal from being noise-free.
*
[A](/img/11/57800/w960_57800-54.png)
54
*
[AS35600(F )08/95]
2. Terrain
*
[AS35700(F )08/95]
The terrain (hilly, mountainous, tall buildings) of
the area over which the signal travels may
prevent the FM signal from being noise-free.
*
[AS35900(F )08/95]
If there is a building or large structure between
the antenna and station, some of the signal
ªbendsº around the building, but certain spots
receive almost no signal. Moving out of the
ªshadowº of the structure will allow the station
to return to normal.
*
[AS36000(F )08/95]
When the radio waves are reflected off objects or
structures, the reflected signal cancels the normal
signal, causing the antenna to pick up noise and
distortion. Cancellation effects are most
prominent in metropolitan areas, but also can
become quite severe in hilly terrain and
depressed roadways.
*
[AS36100(F )08/95]
To minimize these conditions, a stereo/mono
blend circuit has been incorporated into this
system. This feature automatically switches a
weak stereo signal to a clearer monaural signal,
which improves the quality of reception.
*
[AS36200(F )08/95]
Several sources of static are normal conditions
on AM frequencies. These can be caused by
power lines, electric fences, traffic lights and
thunderstorms.
*
[AS36300(F )08/95]
Another reception phenomenon isStrong Signal
Capture and Overload. This can occur when
listening to a weak station and when passing
another broadcast tower. The close station may
capture the more distant station, although the
displayed frequency does not change. While
passing the tower, the station may switch back
and forth a few times before returning to the
original station.
File:04ltasf.ex
Update:Tue May 28 08:40:59 1996
ProCarManuals.com
Page 63 of 377
![FORD F250 1997 User Guide 62 [CF03900(F )04/96]q
Remove any snow, ice or leaves from the air
intake area of your Air Conditioner (if
equipped) and Heater System which could
block the air intake. The intake area is located
at t FORD F250 1997 User Guide 62 [CF03900(F )04/96]q
Remove any snow, ice or leaves from the air
intake area of your Air Conditioner (if
equipped) and Heater System which could
block the air intake. The intake area is located
at t](/img/11/57800/w960_57800-62.png)
62 [CF03900(F )04/96]q
Remove any snow, ice or leaves from the air
intake area of your Air Conditioner (if
equipped) and Heater System which could
block the air intake. The intake area is located
at the bottom of the windshield.
% [CF13500(F )04/96]
Dual Fuel Tank Selector Switch
(If equipped)
[CF13700(F )04/96]
To choose which fuel tank that you want your
engine to draw fuel from (front or rear) you
must use this switch. Your fuel gauge will
display the amount of fuel available in the
currently selected tank.
[CF13800(F )04/96]
The fuse that protects the fuel tank selector
circuit is labeled AUX FUEL TANK SELECTOR
on your fuse panel cover.
[CF13900(F )04/96]
quarter page art:0020066-B
Fuel tank selector switch
%*
[CF14000(F )03/96]
The Interior and Exterior Lights
%*
[CF14100(FM)03/96]
Turning On the Exterior Lights
*
[CF14200(FM)01/96]
To turn on your headlamps, parking lamps,
marker lamps, license plate lamps and tail
lamps, use the headlamp switch to the left of the
steering column.
[CF14300(FM)04/96]
1. Pull the headlamp control knob toward you
to the first position. Parking lamps, tail
lamps, license plate lamps and marker lamps
are now on.
File:05ltcff.ex
Update:Tue May 28 08:42:43 1996
ProCarManuals.com
Page 64 of 377
![FORD F250 1997 User Guide 63 [CF14400(FM)04/96]
2. Pull the headlamp control knob toward you
to the outer position. Headlamps are now on
in addition to the above.
[CF14500(F )04/96]
3. Rotate the knob when it is in an on posit FORD F250 1997 User Guide 63 [CF14400(FM)04/96]
2. Pull the headlamp control knob toward you
to the outer position. Headlamps are now on
in addition to the above.
[CF14500(F )04/96]
3. Rotate the knob when it is in an on posit](/img/11/57800/w960_57800-63.png)
63 [CF14400(FM)04/96]
2. Pull the headlamp control knob toward you
to the outer position. Headlamps are now on
in addition to the above.
[CF14500(F )04/96]
3. Rotate the knob when it is in an on position
to brighten or dim the instrument panel
lamps. Rotate fully counterclockwise to
operate courtesy and cargo lamps.
[CF14600(FM)05/96]
half page art:0020122-G
Headlamp switch
%*
[CF14800(FM)03/96]
Daytime Running Light System
*
[CF14900(FM)03/96]
(Canadian vehicles only)
*
[CF15000(FM)03/96]
The Daytime Running Light (DRL) system turns
the high beam headlamps on, with a reduced
light output, when:
*
[CF15100(FM)03/96]
q
The headlamp system is in the OFF position,
and
*
[CF15200(FM)01/96]
q
The vehicle is running, and
*
[CF15300(FM)03/96]
q
The vehicle has a fully released parking
brake.
File:05ltcff.ex
Update:Tue May 28 08:42:43 1996
ProCarManuals.com
Page 65 of 377
![FORD F250 1997 User Guide 64
*
[CF15400(FM)01/96]
NOTE: You may notice that the lights flicker
when the vehicle is turned on or off.
This is a normal condition.
*
[CF15500(F )03/96]
RWARNING
The Daytime Running Light (DRL) sys FORD F250 1997 User Guide 64
*
[CF15400(FM)01/96]
NOTE: You may notice that the lights flicker
when the vehicle is turned on or off.
This is a normal condition.
*
[CF15500(F )03/96]
RWARNING
The Daytime Running Light (DRL) sys](/img/11/57800/w960_57800-64.png)
64
*
[CF15400(FM)01/96]
NOTE: You may notice that the lights flicker
when the vehicle is turned on or off.
This is a normal condition.
*
[CF15500(F )03/96]
RWARNING
The Daytime Running Light (DRL) system
will not illuminate the tail lamps and
parking lamps. Turn on your headlamps
at dusk. Failure to do so may result in a
collision.
%*
[CF15600(F )03/96]
Lighting Up the Instrument Panel and the
Interior of Your Vehicle
*
[CF15700(F )03/96]
The instrument panel lights can be turned on by
pulling the headlamp switch toward you to
either the first or outer position. You can
brighten or dim the instrument panel lights by
rotating the headlamp switch knob.
% [CF15800(F )04/96]
Cargo, Courtesy and Dome Lamps
[CF16400(F )04/96]
The interior/courtesy lamp is automatically
turned on when the driver or passenger door is
opened. Turning the headlamp switch fully
counterclockwise will operate the interior lamp
when the doors are closed.
[CF16500(F )04/96]
quarter page art:0020695-A
Interior/Courtesy lamp
File:05ltcff.ex
Update:Tue May 28 08:42:43 1996
ProCarManuals.com
Page 66 of 377
![FORD F250 1997 User Guide 65 %
*
[CF16600(F )03/96]
Combination Cargo and High-Mount
Brakelamp
[CF16700(F )04/96]
The combination cargo/high-mount brakelamp is
located outside the vehicle, directly over the rear
window. Use th FORD F250 1997 User Guide 65 %
*
[CF16600(F )03/96]
Combination Cargo and High-Mount
Brakelamp
[CF16700(F )04/96]
The combination cargo/high-mount brakelamp is
located outside the vehicle, directly over the rear
window. Use th](/img/11/57800/w960_57800-65.png)
65 %
*
[CF16600(F )03/96]
Combination Cargo and High-Mount
Brakelamp
[CF16700(F )04/96]
The combination cargo/high-mount brakelamp is
located outside the vehicle, directly over the rear
window. Use the headlamp control switch to
turn on the cargo lamp and interior courtesy
lights.
[CF16800(F )01/96]
A high-mount brakelamp feed is provided in the
taillamp wiring, in the event an aftermarket cap
is installed on the vehicle obscuring the
cargo/high-mount brakelamp on the cab. The
feed is located at the left rear of the vehicle,
behind the bumper and is marked with a white
tag ªcenter high-mount stop lamp.º
[CF16900(F )04/96]
quarter page art:0020902-B
Cargo/High-mount brakelamp
*
[CF17100(F )03/96]
RWARNING
Do not drive your vehicle with the
cargo/courtesy light on. Showing a white
light to the rear while driving on public
roads is illegal in some places.
File:05ltcff.ex
Update:Tue May 28 08:42:43 1996
ProCarManuals.com
Page 67 of 377
![FORD F250 1997 User Guide 66 % [CF17500(F )04/96]Turning On the Dome/Map Reading
Lamps (If equipped)
[CF17600(F )04/96]
The map lamps are located inside the dome light
assembly, on each side of the dome light. Each
lamp has it FORD F250 1997 User Guide 66 % [CF17500(F )04/96]Turning On the Dome/Map Reading
Lamps (If equipped)
[CF17600(F )04/96]
The map lamps are located inside the dome light
assembly, on each side of the dome light. Each
lamp has it](/img/11/57800/w960_57800-66.png)
66 % [CF17500(F )04/96]Turning On the Dome/Map Reading
Lamps (If equipped)
[CF17600(F )04/96]
The map lamps are located inside the dome light
assembly, on each side of the dome light. Each
lamp has its own switch.
[CF17900(F )04/96]
quarter page art:0020127-B
Map lamps
%*
[CF21800(F )05/96]
Power Point Electrical Outlet
[CF21900(F )04/96]
The power point outlet is located on the
instrument panel to the right of the shift lever.
This outlet should be used in place of the
cigarette lighter for optional electrical accessories.
[CF22050(F )04/96]
NOTE: Do not use the cigarette lighter in
place of the power point.
[CF22100(F )04/96]
quarter page art:0020929-A
Power point electrical outlet
[CF22200(F )04/96]
To access the outlet, lift up the hinged cover.
File:05ltcff.ex
Update:Tue May 28 08:42:43 1996
ProCarManuals.com
Page 68 of 377
![FORD F250 1997 User Guide 67
*
[CF24100(FM)01/96]
Ignition
%*
[CF24110(FM)01/96]
Understanding the Positions of the Ignition
*
[CF24120(FM)01/96]
quarter page art:0020004-B
The positions of the key in the ignition lock cylinde FORD F250 1997 User Guide 67
*
[CF24100(FM)01/96]
Ignition
%*
[CF24110(FM)01/96]
Understanding the Positions of the Ignition
*
[CF24120(FM)01/96]
quarter page art:0020004-B
The positions of the key in the ignition lock cylinde](/img/11/57800/w960_57800-67.png)
67
*
[CF24100(FM)01/96]
Ignition
%*
[CF24110(FM)01/96]
Understanding the Positions of the Ignition
*
[CF24120(FM)01/96]
quarter page art:0020004-B
The positions of the key in the ignition lock cylinder.
*
[CF24130(FM)01/96]
ON allows you to test your vehicle's warning
lights (except the brake system warning light) to
make sure they work before you start the
engine. The key returns to the ON position once
the engine is started and remains in this position
while the engine runs.
*
[CF24140(FM)01/96]
START cranks the engine. Release the key once
the engine starts so that you do not damage the
starter. The key should return to ON when you
release it. The START position also allows you
to test the brake warning light.
*
[CF24150(FM)01/96]
OFF allows you to shut off the engine and all
accessories without locking the steering wheel or
the automatic transmission gearshift lever.
[CF24160(F )03/96]
LOCK locks the steering wheel. It also locks the
gearshift if your vehicle's gearshift is on the
column.
File:05ltcff.ex
Update:Tue May 28 08:42:43 1996
ProCarManuals.com
Page 72 of 377
![FORD F250 1997 User Guide 71
%*
[CF26900(FM)02/96]
The Turn Signal Lever
*
[CF27000(FM)02/96]
You can use the turn signal lever on the left side
of the steering column to:
*
[CF27100(FM)02/96]
q
operate the turn signals and co FORD F250 1997 User Guide 71
%*
[CF26900(FM)02/96]
The Turn Signal Lever
*
[CF27000(FM)02/96]
You can use the turn signal lever on the left side
of the steering column to:
*
[CF27100(FM)02/96]
q
operate the turn signals and co](/img/11/57800/w960_57800-71.png)
71
%*
[CF26900(FM)02/96]
The Turn Signal Lever
*
[CF27000(FM)02/96]
You can use the turn signal lever on the left side
of the steering column to:
*
[CF27100(FM)02/96]
q
operate the turn signals and cornering lamps
*
[CF27200(F )03/96]
q
turn the high beams on/off
*
[CF27300(F )03/96]
q
flash the lamps
*
[CF27400(F )03/96]
q
turn the windshield wipers and washer
on/off
%*
[CF27500(FM)01/96]
Turn Signals
*
[CF27600(FM)01/96]
Move the lever up to signal a right turn. Move
it down to signal a left turn. The corresponding
indicator light in the instrument cluster will
flash.
*
[CF27700(FM)01/96]
If the turn signal stays on after you turn, move
the lever back to the center (off) position.
[CF27800(FM)04/96]
one third page art:0020081-C
Turn signal lever and functions
*
[CF27900(FM)08/95]
If the turn indicator light in the instrument
panel does not illuminate or remains on (doesn't
flash) when you signal a turn, the turn signaling
system is malfunctioning. Have this condition
corrected as soon as possible, but make sure that
you use the accepted hand signals in the
meantime.
File:05ltcff.ex
Update:Tue May 28 08:42:43 1996
ProCarManuals.com