clock setting FORD F250 1997 Owners Manual

31
*
[AS03000(F )02/96]
q
Setting the Station Memory Preset buttons
%*
[AS03100(F )08/95]
Your radio is equipped with 5 station
memory buttons. These buttons can be used
to select up to 5 preset AM stations and 10
FM stations (5 in FM1 and 5 in FM2). Follow
the easy steps below to set these buttons to
the desired frequencies.
*
[AS03200(F )03/96]
1. Select a band, then select a frequency.
*
[AS03400(F )10/95]
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that
button.
*
[AS03500(F )10/95]
3. Follow the two steps above for each station
memory preset button you want to set.
*
[AS03510(F )08/95]
NOTE: If the vehicle's battery is disconnected,
the clock and station memory preset
buttons (if programmed in auto mode)
will need to be reset.
*
[AS03520(F )10/95]
q
Using the Automatic Memory Load feature
*
[AS03530(F )08/95]
You can activate theAuto Memory Load
feature by pressing and holding the ªAUTO
PRESETº buttonfor approximately three
seconds. Auto Memory Load sets all memory
buttons in AM, FM1 and FM2 sequentially by
seeking out the first five strong stations for
the respective band and storing them in
memory buttons 1-5. (FM2 will store the
second set of strong stations from the FM
band.)
File:04ltasf.ex
Update:Tue May 28 08:40:59 1996
ProCarManuals.com

52
*
[AS33500(F )02/96]
q
Setting the Station Memory Preset buttons
[AS33600(F )04/96]
Your radio is equipped with 6 station
memory preset buttons. These buttons can be
used to select up to 6 preset AM stations.
Follow the easy steps below to set these
buttons to the desired frequencies:
[AS33800(F )04/96]
1. Tune to the desired frequency.
[AS33900(F )04/96]
2. Press one of the memory preset buttons and
hold the button in until the sound returns.
That station is now held in memory on that
button.
[AS34000(F )04/96]
3. Follow the two steps above for each station
memory preset you want to set.
*
[AS34100(F )08/95]
NOTE: If the vehicle's battery is disconnected,
the clock and station memory preset
buttons (if programmed in auto mode)
will need to be reset.
*
[AS34200(F )10/95]
Adjusting the tone balance and speaker
output of your radio
[AS34300(F )04/96]
The ªTONEº control on the right side of your
radio controls the bass and treble balance. Rotate
the control clockwise to increase the treble
response (more highs) and counterclockwise to
increase the bass response (more lows).
%*
[AS34400(F )01/96]
Clock Operation
*
[AS34500(F )08/95]
How to view the clock mode
*
[AS34600(F )08/95]
Press the ªCLOCKº button to alternate the
frequency and time in the display. In the clock
mode, pressing any radio function will
automatically display the radio frequency for
approximately ten seconds before changing back
to the clock mode.
File:04ltasf.ex
Update:Tue May 28 08:40:59 1996
ProCarManuals.com