clutch FORD F250 1997 Owners Manual

79
*
[CF32682(FM)05/96]
To Disengage Speed Control
[CF32687(FM)05/96]
q
Depress the brake pedal.OR
[CF32692(FM)05/96]
q
Depress the clutch pedal (if equipped).
*
[CF32697(FM)05/96]
Disengaging the speed control will not erase the
previously programmed set speed.
*
[CF32702(FM)05/96]
To Return to a Set Speed
[CF32707(FM)05/96]
q
PressRESUME.
[CF32712(FM)05/96]
ForRESUMEto operate, the vehicle speed must
be faster than 30 mph (48 km/h).
%
*
[CF38400(F )03/96]
Mirrors
[CF38500(F )04/96]
With the door closed and the seat adjusted for
comfort and proper vehicle control, move the
mirrors for best view by tilting up or down, left
or right. Do not adjust the mirrors while the
vehicle is in motion.
*
[CF38700(F )01/96]
RWARNING
Make sure you can see clearly through the
rearview mirror at all times. Do not block
your vision. If you cannot see through the
mirror, it could result in a collision,
injuring yourself and others.
%*
[CF38710(F )05/96]
Outside Mirrors (Manual Control)
*
[CF38720(F )05/96]
Adjust outside mirrors with the door closed and
the seat adjusted for comfort and proper vehicle
control. Move the mirrors for best view by
tilting up or down, left or right.
*
[CF38730(F )05/96]
On vehicles equipped with fold-away mirrors,
the mirrors should be folded rearward into the
body position before entering automatic car
wash systems.
File:05ltcff.ex
Update:Tue May 28 08:42:43 1996
ProCarManuals.com

138
[TO01000(FM)01/96]
Starting your vehicle
%*
[TO01100(FM)01/96]
Preparing to Start Your Vehicle
*
[TO01200(FM)02/96]
RWARNING
Do not start your vehicle in a closed
garage or in other enclosed areas. Exhaust
fumes can be toxic. Always open the
garage door before you start the engine.
*
[TO01300(FM)01/96]
Before you start your vehicle, do the following:
*
[TO01400(F )01/96]
1. Make sure all occupants in the vehicle
buckle their safety belts. SeeSafety Restraints
in the Index for more details.
*
[TO01600(FM)01/96]
2. Make sure the headlamps and other
accessories are turned off when starting.
*
[TO01700(F )01/96]
3.If you have an automatic transmission,
make sure that the gearshift lever is in P
(Park) and the parking brake is set before
you turn the key.
*
[TO01900(F )01/96]
4.If you have a manual transmission,make
sure that the parking brake is fully set, push
the clutch pedal to the floor, and put the
gearshift into Neutral before you turn the
key. (Remember, the starter will operate only
if the clutch pedal is pushed in all the way).
%*
[TO02000(F )01/96]
Testing the Warning Lights
*
[TO02100(F )02/96]
Before you start your vehicle, you should test
the warning lights on the instrument panel to
make sure that they work. Refer to the
Instrumentationchapter.
[TO02200(F )04/96]
If your Brake Warning Light does light up with
the key in the ON position, you may not have
fully released the parking brake or the brake
fluid may be low.
File:08lttof.ex
Update:Tue May 28 08:44:45 1996
ProCarManuals.com

149
*
[GF03650(FM)01/96]
RWARNING
If you are driving down a long or steep
hill, shift to a lower gear. Do not apply
your brakes continuously, as they may
overheat and become less effective.
%
*
[GF03750(FM)01/96]
Using the Parking Brake
*
[GF03800(F )03/96]
The parking brake should be used whenever
you park your vehicle.
*
[GF03850(F )01/96]
The parking brake pedal is suspended just below
the bottom of the instrument panel to the left of
service brake and/or clutch pedals. To set the
parking brake while parking your vehicle, press
the brake pedal with your right foot and hold it
while you push the parking brake pedal down
firmly and fully with your left foot.
[GF04000(FM)04/96]
one third page art:0020893-A
Parking Brake
*
[GF04200(F )03/96]
RWARNING
Always set the parking brake fully and
make sure that the gearshift is securely
latched in P (Park) (automatic
transmission) or in 1 (First) (manual
transmission).
File:09ltgff.ex
Update:Thu May 30 15:25:49 1996
ProCarManuals.com

152Temperature are used by the PCM to shift the
transmission into a higher or lower gear when
required for the best performance and fuel
economy. For example, you may notice that the
transmission will upshift to a higher gear more
quickly when the vehicle is first driven and has
not reached normal operating temperature.
[GF07550(FM)04/96]
The PCM also controls the transmission's Torque
Converter Clutch to further raise vehicle
performance and fuel economy. The Torque
Converter Clutch will engage when the
transmission operating temperature and other
conditions determined by the PCM have been
met. Engagement of the clutch may be noted as
a decrease in engine speed after an upshift has
completed or when the driver has depressed the
throttle while driving at a steady road speed.
[GF07575(FM)01/96]
To help in troubleshooting, the PCM continually
performs self-tests on the electronic control
system and if any faults are detected, will store
them in memory. The Transmission Control
Indicator Light (TCIL), which is located on the
gearshift lever, may flash steadily if a
malfunction has been detected. If the TCIL is
flashing, contact your Ford dealer as soon as
possible. If this condition persists, damage to the
transmission could occur.
[GF07600(FM)01/96]
NOTE: The word ªOFFº located on the end of
the gearshift lever is the transmission
control indicator light (TCIL).
%*
[GF07625(FM)05/96]
Putting Your Vehicle in Gear
[GF07650(FM)04/96]
Your vehicle's gearshift is on the steering
column. The Transmission Control Switch and
indicator light are located on the end of the
gearshift lever. You can put the gearshift in any
of the several positions.
File:09ltgff.ex
Update:Thu May 30 15:25:49 1996
ProCarManuals.com

158
*
[GF08550(FM)05/96]
Forced Downshifts
*
[GF08575(FM)05/96]
To gain extra acceleration injOverdrive or
Drive (O/D OFF), push the accelerator to the
floor. The transmission will automatically
downshift to the appropriate gear: third, second
or first.
*
[GF08625(FM)05/96]
Increasing the engine speed above idle without
vehicle movement (such as holding the brake) in
a forward or reverse gear causes transmission
stall.
*
[GF08650(FM)05/96]
NOTE: Continued operation in the stall
condition can result in transmission
overheat, malfunction or fluid
expulsion.
%
*
[GF12100(F )01/96]
Driving with a Manual
Transmission
%*
[GF12200(F )01/96]
Using the Clutch
*
[GF12300(F )01/96]
Make sure the gearshift lever is in the N
(Neutral) position and your right foot is holding
down the brake pedal. Then press the clutch
pedal to the floor with your left foot. Manual
transmission vehicles have a starter interlock
switch. The starter will not crank until the clutch
pedal is fully depressed. Start the engine and
allow it to idle for a few seconds. Move the
gearshift into 1 (First) or R (Reverse).
*
[GF12400(F )01/96]
To move the vehicle, release the clutch slowly
and at the same time press down slowly on the
accelerator so that the vehicle accelerates.
*
[GF12500(F )01/96]
Do not drive with your foot resting on the
clutch pedal and do not use the clutch to hold
your vehicle at a standstill while waiting on a
hill. These actions will seriously reduce clutch
life.
File:09ltgff.ex
Update:Thu May 30 15:25:49 1996
ProCarManuals.com

159
*
[GF12600(F )01/96]
Driving with your foot resting on the clutch may
cause the vehicle to jerk sharply when pressing
or removing your other foot from the
accelerator.
%*
[GF12700(F )01/96]
Shifting the Gears
*
[GF12800(F )01/96]
The gearshift for a manual transmission is
mounted on the floor. The gearshift pattern
consists of seven positions: Neutral, five forward
gears, and Reverse.
*
[GF12900(F )01/96]
quarter page art:0020134-A
5-Speed Overdrive manual transmission shift pattern
*
[GF13000(F )01/96]
Backing up
*
[GF13100(F )01/96]
To shift into R (Reverse):
*
[GF13200(F )01/96]
1. Push the clutch pedal in all the way to the
floor and hold it. If you do not hold the
clutch pedal in all the way, you may hear a
grinding noise when you shift.
*
[GF13300(F )01/96]
2. Bring your vehicle to a complete stop.
Failure to do so may cause synchronizer
teeth damage, reducing the useful life of
your transmission.
File:09ltgff.ex
Update:Thu May 30 15:25:49 1996
ProCarManuals.com

160
*
[GF13400(F )01/96]
3. Put the gearshift in Neutral and wait at least
3 seconds before shifting into R (Reverse) to
prevent a grinding noise. Do not release the
clutch.
*
[GF13500(F )01/96]
4. Push the gearshift all the way to the right
and pull it back into Reverse.
*
[GF13600(F )01/96]
With the 5-speed transmission you can engage R
(Reverse) only by moving the gearshift from the
left of 3 (Third) and 4 (Fourth) gears before you
shift into R (Reverse). This is a special lockout
feature that protects you from accidentally
shifting into R when you downshift from 5
(Fifth) gear.
*
[GF13700(F )01/96]
5. Once R (Reverse) is engaged, slowly release
the clutch pedal from the floor.
*
[GF13800(F )01/96]
If R (Reverse) is not engaged, continue to push
the clutch pedal in while you put the gearshift
back into Neutral. Then, release the clutch pedal
for a moment and repeat steps 2 through 5.
*
[GF13900(F )01/96]
Upshifting/downshifting
[GF14000(F )04/96]
Upshift and Downshift at the speeds that are
specified in the charts available for your engine
and transmission.
File:09ltgff.ex
Update:Thu May 30 15:25:49 1996
ProCarManuals.com

162
*
[GF14850(F )01/96]
When you come to a stop, do not downshift
through each gear. Disengage the clutch and use
the brake as necessary. Downshifting through
the gears decreases your vehicle's fuel economy.
*
[GF14900(F )01/96]
RWARNING
Continued use of a damaged or worn
clutch, prolonged clutch slippage or
downshifting at excessive speeds can
result in a failure of the engine,
transmission or clutch components.
*
[GF14950(F )01/96]
Transmission Function
[GF15000(F )04/96]
Upshift at the speeds specified in the chart
available for your engine and transmission. All
forward gears are synchronized allowing you to
shift into them with your vehicle in motion. The
clutch pedal should be fully depressed when
shifting.
*
[GF15050(F )03/96]
NOTE: Shifting during extremely low RPMs
can result in a momentary audible
rattle which disappears as vehicle
RPMs are increased. Shifting at higher
speeds will eliminate this sound.
*
[GF15100(F )01/96]
Parking
*
[GF15150(F )01/96]
To park your vehicle, apply the service brake
pedal, and shift into N (Neutral) while still
maintaining pressure on the service brake. Set
the parking brake fully. Shift into first and turn
off the ignition.
*
[GF15200(F )01/96]
RWARNING
Do not park your vehicle in Neutral, it
may move unexpectedly and injure
someone. Use 1 (First) gear and set the
parking brake fully.
File:09ltgff.ex
Update:Thu May 30 15:25:49 1996
ProCarManuals.com

168
*
[GF16650(F )01/96]
To shift from 4H to 2H:
[GF16700(F )04/96]
Move the transfer case shift lever straight
forward to the 2H position. This can be done at
any speed. To disengage the automatic locking
hubs, operate the vehicle in 2H in the opposite
direction for approximately 10 feet (3 meters).
*
[GF16750(F )05/96]
For example:
[GF16800(F )04/96]
If you were driving the vehicle forward in
4H, the automatic locking hubs will
disengage the next time the vehicle is driven
in reverse in 2H for approximately 10 feet (3
meters).
[GF16850(F )04/96]
If you were driving the vehicle in reverse in
4H, the automatic locking hubs will
disengage the next time the vehicle is driven
forward in 2H for approximately 10 feet (3
meters).
[GF16900(F )04/96]
Ð Operating in 2H with the hubs locked
increases fuel consumption, noise, vibration, and
wear. For prolonged 2H operation on dry
pavement, disengage the automatic locking hubs.
*
[GF16950(F )01/96]
To shift between 4H and 4L:
[GF17000(F )04/96]
Stop the vehicle and place the automatic
transmission into NEUTRAL or depress the
clutch on manual transmission vehicles. Push the
transfer case shift knob down (toward the
ground) and at the same time pull or push the
lever straight forward or rearward (depending
on the desired position, 4H or 4L) in order to
shift the transfer case. This shift should be in
one continuous motion without pausing in the N
(neutral) position. Pausing in the neutral position
can result in gear clash and difficult shifting. If,
while shifting between 4H and 4L, the transfer
File:09ltgff.ex
Update:Thu May 30 15:25:49 1996
ProCarManuals.com

169
case gets stuck in the N (neutral) position or is
difficult to shift into either 4H or 4L, it may be
necessary to let the vehicle roll slightly and/or
turn off the engine (particularly on vehicles
equipped with automatic transmissions).
[GF17050(F )04/96]
To shift into and out of N (neutral)
[GF17100(F )04/96]
To shift into N (neutral), stop the vehicle and
engage the parking brake. Place the automatic
transmission into NEUTRAL or depress the
clutch on manual transmission vehicles. From
either the 4H or 4L position, push the transfer
case shift knob down (toward the ground) and
at the same time move the transfer case shift
lever to the N (neutral) position. The N (neutral)
position should only be used for vehicle towing
or transfer case mounted PTO use (transfer case
PTO opening available on F-350 as an option).
[GF17200(F )04/96]
NOTE: Dash mounted four wheel drive
indicator lights are off when your
vehicle is in neutral.
[GF17250(F )04/96]
To shift from N (Neutral) to either 4H or 4L,
stop the vehicle and engage the parking brake.
Place the automatic transmission into NEUTRAL
or depress the clutch on manual transmission
vehicles. Push the transfer case knob down
(toward the ground) and at the same time move
the transfer case shift lever to the desired
position. If it is difficult to shift into either 4H or
4L, it may be necessary to let the vehicle roll
slightly and/or turn off the engine (particularly
on vehicles equipped with automatic
transmissions).
File:09ltgff.ex
Update:Thu May 30 15:25:49 1996
ProCarManuals.com