lug pattern FORD F250 SUPER DUTY 2020 Owners Manual

Note:
For dual rear wheel, align the
ornament with the lug nuts. A is the clip and
B is the flange, make sure all of the retention
clips are sitting on the flange of the lug nuts. Note:
Be sure to install all the clips on the
nuts over the flanges so that there is an even
gap all around the retention clips are fully
seated. Use your hand or a rubber mallet to tap the
ornament onto the wheel with in a star
pattern until it is retained with an even gap
all around between the ornament and the
wheel. There should be an even gap
between the ornament and the wheel.
Stowing the Flat Tire or Spare Tire
1. Place the tire on end with the valve
stem facing toward the front of the
vehicle. Lay the tire on the ground, near
the rear of the vehicle, with the valve
stem side facing up. 430
Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 201909, Second-Printing Wheels and TiresE162820 AB
E162822 E162823 A
C
B
D
E162824 E162800