change language FORD FIESTA 2011 Owners Manual

Changing the language setting
SYNCallows you to select from three languages: English, French and
Spanish. Once selected, all radio display messages and prompts will be in
the selected language. To access the language menu:
Note:To scroll, press
/.
1. Press PHONE to enter thePhone Menu.
2. Scroll untilSystem Settingsis selected and press OK.
3. Scroll untilAdvancedis selected and press OK.
4. Scroll untilLanguagesis selected and press OK.
5. Scroll to cycle throughEnglish,FrancaisandEspanol.
6. Press OK when the desired selection is selected. If you have changed
the language setting, the display will indicate the system is updating.
Once the change is complete, SYNCwill confirm the change audibly and
in the radio display. SYNCwill then take you back to theLanguages
menu.
Returning to the factory defaults
SYNCallows you to return to its factory defaults settings. This selection
will not erase your downloaded phone book, call history, text messages,
etc. If you wish to erase all information, refer toPerforming a master
reset.
Note:To scroll, press
/.
1. Press PHONE to enterPhone Menu.
2. Scroll untilSystem Settingsis selected and press OK.
3. Scroll untilAdvancedis selected and press OK.
4. Scroll untilFactory Defaultsis selected and press OK.
5. Restore Defaults? will appear. Press OK to confirm. The display will
read Defaults Set. SYNCwill take you back to theFactory Defaults
menu.
Performing a master reset
A master reset allows you to completely erase all information stored in
SYNC(all phone book, call history and text message information as well
as all previously paired phones) and return to the factory default
settings. To perform a master reset:
Note:To scroll, press
/.
Entertainment Systems
74
2011 Fiesta(fie)
Owners Guide, 3rd Printing
USA(fus)
ProCarManuals.com

5. WhenAdvancedis selected, press OK to select from:
•Prompts•Install Application?
•Languages•System Info
•Factory Defaults•Return
•Master Reset
Refer to the following sections for further information.
Adding a Bluetooth media device which is in discovery mode
Note:This is a speed dependent feature. Your vehicle must be moving
less than 3 mph (5 km/h) to use this feature.
Note:If your phone supports streamingBluetoothaudio and has already
been paired with SYNCas a phone, you do not have to go through the
pairing process again.
Note:To scroll, press
/.
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilBluetooth Devicesis selected and press OK.
5. Scroll untilAdd Bluetooth Deviceis selected and press OK.
6. WhenFind SYNCappears in the display, press OK. Follow the
instructions in your device’s user guide to put your phone into discovery
mode. A six digit PIN will appear in the radio display.
7. When prompted on your phone’s display, enter the six digit PIN in the
radio display.
8. Once pairing is successful, the device name and thenConnectingand
thenConnectedwill appear in the radio display.
You can now change SYNCsources to Bluetooth Audio and stream
music from your device.
Adding a Bluetooth media device which is in discoverable mode
Note:This is a speed dependent feature. Your vehicle must be moving
less than 3 mph (5 km/h) to use this feature.
Note:If your phone supports streamingBluetoothaudio and has already
been paired with SYNCas a phone, you do not have to go through the
pairing process again.
Note:Use this process when your device generates the PIN instead of
SYNC.
Entertainment Systems
84
2011 Fiesta(fie)
Owners Guide, 3rd Printing
USA(fus)
ProCarManuals.com

3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilAdvancedis selected and press OK.
5. Scroll untilPromptsis selected and press Ok.
6. Scroll to toggle betweenPrompts On?orPrompts Off?(The default
setting is ON).
7. Press OK when the desired selection is chosen. SYNCwill then take
you back to theAdvancedmenu.
Changing the SYNClanguage setting
SYNC allows you to select from three languages: English, French and
Spanish. Once selected, all of SYNC’s radio displays and prompts will be
in the selected language. To access the language menu:
Note:To scroll, press or
/.
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilAdvancedis selected and press OK.
5. Scroll untilLanguagesis selected and press OK.
6. Scroll to cycle throughEnglish,FrancaisandEspanol.
7. Press OK when the desired selection is chosen. If you have changed
the language setting, the display will indicate the system is updating.
Once the change is complete, SYNCwill confirm the change audibly and
in the radio display. SYNCwill then take you back to theAdvanced
menu.
Returning to the factory defaults
SYNCallows you to return to the factory defaults settings. This
selection will not erase your indexed information. If you wish to erase all
information, refer toPerforming a master reset.
Note:To scroll, press
/.
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilAdvancedis selected and press OK.
5. Scroll untilFactory Defaultsis selected and press OK.
Entertainment Systems
87
2011 Fiesta(fie)
Owners Guide, 3rd Printing
USA(fus)
ProCarManuals.com