brake FORD FIESTA 2014 6.G ST Supplement Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 2014, Model line: FIESTA, Model: FORD FIESTA 2014 6.GPages: 32, PDF Size: 3.13 MB
Page 8 of 32

•1.6L GTDI EcoBoost I4 engine
•Overboost function for increasedtorque
•Electronic overspeed function with6500 RPM redline
•ST-tuned 55 millimeters (2.17 inches)exhaust system with dual tips
•Ford B6 6-speed manual transaxle
•Sound symposer
•ST-tuned electric power assistedsteering
•Modified front suspension knuckle forimproved wheel end geometry
•ST-tuned springs, dampers, stabilizerbar and rear twist beam
•Increased diameter front brake rotors(278 millimeters x 23 millimeters) (10.9inches x 0.91 inches), rear brake rotors(253 millimeters x 10.2 millimeters (9.9inches x 0.40 inches) with uniquecalipers and ST-tuned brake pads
•Rear disc brakes with ST-tuned brakepads
•Enhanced torque vectoring withundersteer control
•AdvanceTrac stability enhancementsystem with three modes: Normal,Sport and Disabled
•17 inch x 7.0 inch wheels with 47.5millimeter offset
•P205/40-R17 Bridgestone RE050Asummer-only tires
•ST-engineered front and rear fasciasand rear wing
•Optional Recaro front seats withincreased lateral support and matchingrear seat covers
•ST-unique instrument panel appliques,shift knob, steering wheel and rockerscuff panels
•ST high-speed instrument cluster
5Fiesta (CCT)At a GlanceE163958
Page 14 of 32

MANUAL TRANSMISSION -
1.6L ECOBOOSTâ„¢
Using the Clutch
Note:Failure to fully depress the clutchpedal to the floor may cause increased shiftefforts, prematurely wear transmissioncomponents or damage the transmission.
Note:Do not drive with your foot resting onthe clutch pedal or use the clutch pedal tohold your vehicle at a standstill whilewaiting on a hill. These actions will reducethe life of the clutch and could nullify aclutch warranty claim.
Manual transmission vehicles have astarter interlock that prevents cranking theengine unless the clutch pedal is fullydepressed.
Starting Your Vehicle
WARNING
Make sure the floor mat is positionedcorrectly so that it does not interferewith the full extension of the clutchpedal.
1.Make sure the parking brake is fully setand move the transmission selectorlever to the neutral position.
2.Fully depress the clutch pedal thenstart the engine.
3.Press the brake pedal and move thetransmission selector lever to first orreverse gear.
4.Release the parking brake and slowlyrelease the clutch pedal while slowlypressing on the accelerator.
During each shift, make sure you fullydepress the clutch pedal.
Recommended Shift Speeds
Note:Do not move the transmissionselector lever to first gear when your vehicleis moving faster than 15 mph (24 km/h).This will damage the clutch.
We recommend you change gearaccording to the following guide to achievethe best fuel economy for your vehicle.
RecommendedspeedShift from
12 mph (19 km/h)1 - 2
23 mph (37 km/h)2 - 3
32 mph (51 km/h)3 - 4
41 mph (66 km/h)4 - 5
42 mph (67 km/h)5 - 6
Reverse
Note:Do not move the transmissionselector lever to reverse gear when yourvehicle is moving. This can cause damageto the transmission.
1.Fully depress the clutch pedal todisengage the clutch.
2.Move the transmission selector leverto the neutral position and wait at leastthree seconds before moving it toreverse.
3.Raise the collar below the transmissionselector lever to select reverse gear.
11Fiesta (CCT)TransmissionE144954
Page 15 of 32

Note:This is a lockout feature whichprotects the transmission from accidentallyengaging reverse gear when intending toselect first gear.
If reverse gear is not fully engaged, pressthe clutch pedal down and move thetransmission selector lever to the neutralposition. Release the clutch pedal for amoment, then raise the collar and movethe transmission selector lever to reverseagain.
Parking Your Vehicle
WARNING
Do not park your vehicle with thetransmission selector lever in theneutral position. Your vehicle maymove unexpectedly and injure someone.Move the transmission selector lever tofirst gear and set the parking brake fully.
To park your vehicle:
1.Press the brake pedal and move thetransmission selector lever to theneutral position.
2.Fully apply the parking brake, hold theclutch pedal down, then move thetransmission selector lever to first gear.
3.Switch the ignition off.
12Fiesta (CCT)TransmissionE99067
Page 17 of 32

Enhanced Torque VectoringControl
Enhanced torque vectoring control iscomprised of two elements:
•Torque vectoring control which appliesbrake torque on the inner wheel in acurve for better traction and lessundersteer
•Cornering understeer control whichcontrols the yaw response of thevehicle under braking and accelerationon high and low friction surfaces.
No action is required to activate torquevectoring control. It operates automaticallydue to vehicle operating conditions.
Unlike electronic stability control,enhanced torque vectoring control doesnot slow the vehicle but does help controlexcessive wheel slip and gives the vehiclecornering agility. The system only increasesperformance. Because of this, enhancedtorque vectoring control is not disabledwhen the AdvanceTrac system is off.
14Fiesta (CCT)Stability Control (If Equipped)
Page 21 of 32

UNDER HOOD OVERVIEW - 1.6L ECOBOOSTâ„¢
Engine coolant reservoirA
Engine oil filler capB
Engine oil dipstickC
BatteryD
Brake and clutch fluid reservoirE
Engine compartment fuse boxF
Windshield and rear window washer fluid reservoirG
Air cleanerH
18Fiesta (CCT)MaintenanceE163014ABCDEFGH
Page 26 of 32

Wheel Lug Nut TorqueSpecifications
WARNING
When a wheel is installed, alwaysremove any corrosion, dirt or foreignmaterials present on the mountingsurfaces of the wheel or the surface of thewheel hub, brake drum or brake disc thatcontacts the wheel. Make sure that anyfasteners that attach the rotor to the hubare secured so they do not interfere withthe mounting surfaces of the wheel.Installing wheels without correctmetal-to-metal contact at the wheelmounting surfaces can cause the wheelnuts to loosen and the wheel to come offwhile the vehicle is in motion, resulting inloss of control.
Retighten the lug nuts to the specifiedtorque at 500 miles (800 kilometers) afterany wheel disturbance (such as tirerotation, changing a flat tire, wheelremoval).
lb-ft (Nm)*Bolt size
100 (135)M12 x 1.5
Torque specifications are for nut and boltthreads free of dirt and rust. Use only Fordrecommended replacement fasteners.
TECHNICAL SPECIFICATIONS
Wheel specifications
17 in. x 7.0 in.Diameter and width
47.5 mmOffset
5.8 in. (149.5 mm)Backspacing
63.3 mmCenter bore
22.5 lb. (10.2 kg)Weight
23Fiesta (CCT)Wheels and Tires
Page 27 of 32

MOTORCRAFT PARTS
1.6L EcoBoost engineComponent
FL-910-SEngine oil filter*
FA-1908Engine air filter
Service for lifeEngine fuel filter
CYFS12Y2 (100000 mile service)Spark plug
*Only use the specified replacementengine oil filter. The use of a non-specifiedoil filter can result in engine damage.
TECHNICAL SPECIFICATIONS
Ford part number /Ford specificationFord part name orequivalentCapacityItem
PM-20 /Motorcraft DOT 4 LVHigh PerformanceMotor Vehicle BrakeFluid
Between MAX andMIN on reservoirBrake fluid1WSS-M6C65-A2and ISO 4925 Class6
XO-5W20-QSP(US)Motorcraft SAE 5W-20 PremiumSynthetic BlendMotor Oil or equi-valent
4.3 quarts (4.1L)(with filter change)Engine oil2
CXO-5W20-LSP12(Canada)
XO-5W20-QFS (US)Motorcraft SAE 5W-20 Full SyntheticMotor OilCXO-5W20-LFS12(Canada) /WSS-M2C945-A
VC-3DIL-B (US)Motorcraft OrangeAntifreeze/CoolantPrediluted
6.5 quarts (6.2L)Engine coolant3CVC-3DIL-B(Canada) /WSS-M97B44-D2
XT-11-QDCMotorcraft DualClutch TransmissionFluid
1.8 quarts (1.7L)Transmission fluid
24Fiesta (CCT)Capacities and Specifications
Page 28 of 32

Ford part number /Ford specificationFord part name orequivalentCapacityItem
WSS-M2C200-D2
1Use only Motorcraft DOT 4 LV High Performance Brake Fluid or equivalent meetingWSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommendedfluid may cause brake system damage.2 Your engine has been designed to use engine oil that meets Ford specification or anequivalent engine oil of the recommended viscosity grade that displays the APICertification Mark for gasoline engines. Do not use supplemental engine oil additives,cleaners or other engine treatments. They are unnecessary and could lead to enginedamage that is not covered by Ford warranty.3Add the coolant type originally equipped in your vehicle.
CodeDescription
BTFord B6 6-speed manual transaxle
25Fiesta (CCT)Capacities and Specifications